Cable blowing machines · Made in Italy

Looking for "fibre optic cable jetting machine price"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Understand the equipment behind your quotation

A fibre optic cable jetting machine price is meaningful only when the quotation describes equipment suited to the cable, duct, and working conditions involved. For purchasing teams evaluating Italian-made equipment for American installation crews, the first step is to define the intended application rather than compare headline figures. Cable outside diameter, duct internal diameter, cable construction, and the expected installation route all influence machine selection. A compact setup intended for smaller cables should not automatically be compared with equipment configured for different dimensions or operating requirements. Fibernet provides a starting point for these discussions through its background in cable installation equipment and the development of its Lady cable blowing machine, first launched in 2021. Ask for confirmation of the current configuration, supported dimensions, included components, and operating requirements before making a purchasing decision. A useful quotation should distinguish the base machine from any separately supplied accessories, interchangeable guides, sealing components, or connection hardware. This makes comparisons clearer and helps prevent a low initial figure from concealing items needed before the first job. When comparing a fibre optic cable blowing machine price, use the same cable and duct specifications for every inquiry so that differences reflect the proposed equipment rather than different assumptions. Describe whether crews will work from roadside chambers, constrained access points, or locations where moving equipment takes considerable time. These details help establish whether handling, setup access, and transport arrangements deserve particular attention. The compressed air supply also needs careful consideration. Required pressure and airflow must be checked against the selected machine documentation and actual site conditions; compressor compatibility should never be assumed from a general product description. Where a pneumatic fibre optic cable jetting machine is being considered, clarify how the drive operates and which external utilities are necessary. Compressed air used to move the cable and air used to power a drive are related purchasing considerations, but they are not interchangeable specifications. Buyers should also request a clear statement of the quotation currency, delivery destination, shipping scope, and any applicable taxes or import responsibilities. Italian manufacturing does not remove the need to establish commercial terms for delivery to the United States. Fibernet presents its equipment with assistance in the United States and worldwide; purchasers should confirm the relevant contact arrangements and service scope for their location. Providing these details at the inquiry stage helps turn a broad price request into an equipment discussion grounded in the work your crews actually perform. It also gives procurement and field supervisors a shared basis for approval, reducing misunderstandings between the purchasing specification and the equipment expected on site.

Compare purchase cost with practical installation requirements

The cheapest quotation is not necessarily the most economical choice for a contractor that must move between cable blowing assignments and maintain consistent installation quality. Evaluating a fibre optic cable jetting machine price therefore requires a wider view of ownership, including preparation time, configuration changes, maintenance, and the availability of suitable replacement components. Start with the types of jobs that make up most of your workload. Record the cable diameters normally handled, the duct dimensions encountered, and the frequency with which crews switch between combinations. A machine that matches those requirements can be easier to justify than equipment selected around an exceptional project that rarely occurs. Ask how the proposed configuration accommodates changes and which parts must be adjusted or replaced. Request the applicable operating instructions before assuming that a changeover is quick or requires no tools. For any cable jetting machine for fiber optic cable installation, the quality of the surrounding setup matters as much as the equipment selection. Duct integrity, suitable connections, cable handling, and a correctly matched air supply can influence installation results. A quoted machine price cannot guarantee a particular installation distance or speed across every route. Bends, duct condition, cable stiffness, friction, and site preparation introduce variables that should be discussed openly. Rather than relying on an isolated performance figure, ask which test conditions or operating assumptions support the information provided. This creates a more realistic basis for planning and helps supervisors distinguish machine capabilities from conditions outside the machine itself. Ownership costs should also account for routine inspection and the replacement of components subject to wear. Ask which items are considered consumables, how they are identified, and whether maintenance can be performed by the operator or requires assistance. Obtain the applicable warranty terms in writing, including exclusions and the process for requesting technical evaluation. If you are comparing a used fibre optic cable jetting machine with new Italian-made equipment, check condition and completeness rather than treating the purchase figures as directly equivalent. Missing guides, worn contact surfaces, uncertain maintenance history, or unavailable documentation can change the value of an apparently attractive offer. These are inspection points, not assumptions that every previously owned machine has problems. For Fibernet equipment, ask how support in the United States and worldwide would apply to your proposed purchase, including troubleshooting contacts and replacement-part inquiries. Confirm response arrangements rather than assuming a guaranteed turnaround. A documented comparison gives purchasing teams a stronger justification for their decision: the selected equipment should fit the work, have a clearly defined supply scope, and provide an understandable route to assistance when questions arise.

Prepare a focused inquiry for Italian-made Fibernet equipment

A productive quotation request begins with a short description of the installation work, not simply a request for the lowest available figure. To discuss a fibre optic cable jetting machine price with Fibernet, assemble the cable and duct information your supervisors already use to plan jobs. Include dimensions with units, the relevant cable data sheet if available, and an outline of typical working conditions. American buyers should make clear whether measurements are provided in inches or millimeters, and avoid relying on approximate conversions when checking compatibility. Explain what equipment is already available on site, particularly the compressor and its documented operating characteristics. If those details have not yet been established, identify them as open questions rather than supplying estimated values. Describe practical constraints such as restricted working space, frequent loading and unloading, or the need to change cable sizes during a working day. These details help guide a discussion about configuration without implying that one machine suits every application. Ask Fibernet to identify the proposed model, included accessories, operating documentation, and any additional items needed for your intended use. The company was established in 2001, drawing on founder Giancarlo Trinei's technical experience with early Italian cable installations. Its development of the Lady machine in 2021 provides relevant background for buyers interested in Italian-made cable blowing equipment. That history can inform a supplier assessment, but it should complement, not replace, verification of the current machine specifications and commercial terms. When comparing ownership with fibre optic cable jetting machine rental, consider how regularly the equipment will be needed and how predictable the schedule is. Rental can be a useful comparison where it is available, but availability, machine condition, included accessories, and hire terms require separate confirmation. Do not assume that Fibernet offers rental simply because rental is part of your purchasing evaluation. Similarly, an electric fibre optic cable jetting machine should only be included in a technical comparison after its power requirements, drive arrangement, and suitability for the intended work have been established. Power-source labels alone do not demonstrate equivalent performance or compatibility. Before accepting a quotation, clarify payment terms, expected availability, the delivery address, and responsibility for shipping arrangements. Confirm how assistance in the United States and worldwide is accessed, which information is needed when reporting an issue, and how replacement components can be requested. Keeping a record of the agreed configuration helps both office staff and field teams identify the equipment accurately later. The result is a more useful purchasing process: Fibernet receives the information needed to discuss an appropriate setup, while your business gains a documented basis for assessing cost, suitability, and ongoing support.

Still looking for information about fibre optic cable jetting machine price?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information