Cable blowing machines · Made in Italy

Looking for "OFC cable blowing machine price"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Understand what your cable blowing machine quotation should include

An OFC cable blowing machine price is most useful when it describes a configuration that matches the work your crew actually performs. For contractors installing optical cables into ducts, the purchase decision should begin with cable dimensions, duct dimensions, route characteristics, and the equipment already available on site. A machine selected only because its advertised price appears attractive may require additional components before it can be used for the intended installation. Fibernet provides a direct point of contact for discussing these requirements and requesting a quotation for its cable blowing equipment. The objective is to establish what you need before comparing figures, rather than treating every machine and accessory package as interchangeable. Prepare the outside diameter of the cable, the internal and external diameters of the duct, and the relevant cable manufacturer limits before requesting a proposal. Include the expected installation lengths and describe whether the route contains frequent bends, intermediate access points, or substantial changes in elevation. These details help frame a meaningful technical discussion, although they cannot guarantee a particular installation distance. Cable stiffness, duct condition, friction, and the available compressed air supply all influence the result. When evaluating a fiber cable blowing machine price, ask which cable and duct combinations the proposed configuration supports and which adaptations would be needed for other combinations used by your crews. The quotation should make its scope easy to understand. Ask whether the proposed supply includes the required guides, seals, connection components, operating documentation, and any accessories discussed during equipment selection. Confirm the machine's power requirements and the compressed air requirements for the intended application. Compressor compatibility deserves particular attention: pressure alone does not describe whether the available air supply is suitable. Flow capacity, air quality, hose connections, and the complete operating setup should be reviewed against the manufacturer's requirements. A written configuration helps purchasing staff and field supervisors assess the same package instead of making different assumptions about what the quoted amount covers. For buyers comparing a cable blowing machine price across suppliers, the strongest comparison is a documented comparison of equivalent scope. Separate the equipment amount from freight, any applicable taxes, optional accessories, and other agreed charges. Clarify the quotation currency, delivery destination, payment terms, and expected availability directly with Fibernet. For procurement connected with projects in Italy or international deployments, also identify the purchasing entity and delivery location early. This avoids confusing a domestic equipment comparison with an international shipment. No single public figure can reliably represent every application, so a tailored quotation is the practical route to an actionable budget. It connects the commercial proposal to your installation requirements and gives your team a clear basis for deciding what to purchase.

Assess installation suitability before comparing purchase costs

A productive equipment evaluation starts at the duct entrance, where the machine must guide and advance the cable while compressed air assists its movement through the route. The practical question is not simply how quickly a machine can operate under favorable conditions. It is whether the proposed setup suits the cable, duct, compressor, and working conditions your crew will encounter. When reviewing an OFC cable blowing machine price, describe a representative job rather than relying on a headline performance figure. Provide the planned cable length, route layout, access arrangements, and any known duct constraints so that the equipment discussion remains grounded in the installation you intend to carry out. Consider a contractor preparing several duct sections with different cable diameters. An appropriate purchasing discussion would cover the configuration required for each diameter, the components that must be changed between jobs, and the checks needed before restarting installation. Ask how the cable is guided through the selected machine and how its operating controls should be used within the cable manufacturer's limits. Confirm the applicable procedures in the equipment documentation rather than assuming every model has the same protective functions. A fiber optic cable blowing machine should be assessed as part of the complete installation setup, including the way operators prepare, monitor, and stop the operation when conditions require it. Duct preparation also affects the value obtained from the equipment. Before installation, crews should establish that the route is suitable for the planned operation and follow the applicable procedures for checking continuity, cleanliness, and connection integrity. Damaged ducts, unsuitable joints, unexpected obstructions, and excessive air leakage can undermine an otherwise appropriate machine selection. Likewise, lubrication should follow the relevant equipment, cable, duct, and lubricant guidance rather than an improvised approach. These considerations are not substitutes for machine capability; they explain why a reliable equipment budget must be accompanied by an equally deliberate installation plan. Paying more cannot compensate for an unsuitable or inadequately prepared route. When comparing a fiber optic cable jetting machine price, ask suppliers to distinguish documented equipment capabilities from results that depend on site conditions. Request the operating information needed to assess compatibility with your existing compressor and accessories, and identify which performance statements apply to the proposed configuration. For American contracting teams evaluating Italian-made equipment, this technical clarity is particularly useful when purchasing staff and field supervisors work in different locations. Share the same specifications with everyone involved, including the people responsible for compressor selection and job preparation. Fibernet's Lady cable blowing machine, first launched in 2021, provides a specific product starting point for that conversation. Confirm the currently available configuration directly with the company and use the resulting documentation to judge suitability, rather than assuming that a product name alone establishes compatibility with every cable installation.

Evaluate Italian manufacturing and support alongside the equipment price

The value of a cable blowing equipment purchase extends beyond the day the machine arrives. Contractors also need to understand how they will obtain operating guidance, identify replacement components, and arrange assistance when a technical question interrupts a planned installation. An OFC cable blowing machine price should therefore be considered alongside the support arrangements associated with the proposed supply. Fibernet's positioning combines Italian-made products with assistance in the United States and worldwide. Before ordering, ask the company to explain how that assistance applies to your delivery location and equipment configuration. Confirm contact channels, service procedures, and the information needed to obtain useful technical help without assuming a guaranteed response time or a particular local service arrangement. Fibernet was founded in 2001, building on the technical experience of Giancarlo Trinei, whose work with optical cable installations began in Italy during the early 1980s. The company introduced its first Lady cable blowing machine in 2021. This background provides context for its focus on developing practical equipment for installation work, but a purchasing decision should still rest on current product documentation and a clearly defined quotation. Ask how the proposed machine should be maintained, which inspections operators should perform, and which replacement parts are relevant to its configuration. Establishing these details before purchase helps your team plan ownership rather than discovering basic service requirements during a busy deployment. A realistic ownership assessment includes more than the initial fiber blowing machine price. Consider the accessories needed for your normal cable sizes, the documented maintenance requirements, and the practical arrangements for sourcing replacement items. Ask whether consumable or wear components are included in the initial package or quoted separately. Confirm warranty terms in writing, including the applicable conditions and the process for requesting an assessment. If a repair requires shipping, clarify the procedure and allocation of transport costs before it becomes urgent. These questions do not imply that a failure is expected; they are ordinary procurement checks for equipment that must support scheduled field operations and coordinated installation crews. For a purchasing team in Italy coordinating work with American contractors, delivery planning should be equally explicit. Identify the receiving address, the responsible buyer, the requested documentation, and any agreed shipping responsibilities in the commercial proposal. Ask Fibernet to confirm current availability rather than basing project commitments on an assumed lead time. When you request a fibre optic cable blowing machine price, include your main application and the support questions that matter most to your organization. A clear enquiry allows the commercial and technical discussion to address the same needs. The resulting decision can then balance suitable equipment, an understandable supply scope, and confirmed assistance arrangements. That is a stronger foundation for purchasing Italian-made cable blowing machinery than selecting the lowest figure without knowing what it includes or how the equipment will be supported.

Still looking for information about OFC cable blowing machine price?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information