Cable blowing machines · Made in Italy

Looking for "fibre cable blowing machine price"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Understand what your cable blowing machine quotation includes

A meaningful fibre cable blowing machine price starts with the work your installation crew needs to complete, rather than a headline figure detached from operating conditions. Cable diameter, duct dimensions, route geometry, available compressed air, and the frequency of deployment all influence which configuration deserves consideration. For contractors assessing equipment for projects in Italy, these details help distinguish a suitable investment from a machine that appears affordable but requires additional components before it can reach the jobsite. Fibernet provides a direct point of contact for discussing cable blowing requirements and requesting a quotation based on the intended application. The company was founded in 2001, and its development of cable installation equipment draws on the technical background of founder Giancarlo Trinei. Its first cable blowing machine, Lady, was introduced in 2021. When preparing an enquiry, begin with the cable manufacturer's diameter and installation limits, the duct's internal diameter, and the expected working environment. Explain whether your crew handles repeated installations with similar dimensions or regularly switches between different cable and duct combinations. That distinction matters because changeover requirements can affect the accessories worth including in an initial equipment package. A buyer comparing fibre optic cable blowing machine price quotations should also establish whether each offer covers the same scope. Ask which cable guides, duct connections, seals, operating accessories, and documentation are included, and which are optional. Do not assume that every photograph represents the exact package being quoted. Compressor compatibility deserves equally careful attention: confirm the required pressure, airflow, air preparation, and connection arrangements against the proposed machine's documentation. Compressed air requirements cannot be inferred reliably from the machine's size or appearance. Delivery terms should be explicit, particularly when equipment will move between Italy and overseas worksites. Ask the supplier to identify the delivery destination, applicable taxes, transport charges, and any export or import responsibilities relevant to the transaction. A clear quotation should also state its validity period and explain how configuration changes affect the final amount. If your purchasing team uses the term optical fibre cable blowing machine price, the same principle applies: compare a defined installation package, not simply two numbers. The strongest starting point is a short technical brief supported by cable and duct specifications. This gives the supplier a practical basis for identifying a suitable configuration, clarifying exclusions, and discussing support arrangements before purchase. It also helps your operations and procurement teams work from the same assumptions, reducing the likelihood of ordering equipment that needs unexpected adaptations before its first installation.

Assess operating value under real jobsite conditions

The purchase figure becomes more useful when it is connected to the practical demands placed on a cable blowing crew. Consider a contractor working through several duct sections with different access conditions during the same week. Time spent preparing connections, checking seals, adjusting the drive, and moving equipment between access points contributes to the cost of every installation. A machine should therefore be evaluated as part of a complete working arrangement, including the compressor, compatible accessories, handling requirements, and the procedures operators must follow. Start by checking whether the proposed equipment accommodates the cable and duct dimensions you actually use. Then review the manufacturer's operating instructions for setup, adjustment, stopping, cleaning, and inspection. Cable blowing combines mechanical feeding with compressed air, so control over the process matters as much as a quoted maximum performance figure. Cable stiffness, duct cleanliness, bends, couplings, gradients, and ambient conditions can all affect results. No responsible equipment comparison should treat a maximum installation distance as a guaranteed outcome on every route. When assessing fibre cable blowing machine price, ask how the proposed configuration supports repeatable preparation and appropriate cable handling within documented limits. Request clarification on the available operating controls, protective features, and adjustment procedures rather than assuming that a particular function is standard. A practical demonstration, where available, can help purchasing staff and field supervisors understand the sequence of operations and identify questions before committing. For buyers considering a used fibre cable blowing machine, condition adds another layer to the calculation. Inspect the drive components, sealing surfaces, duct connections, controls, and any supplied accessories. Seek evidence of maintenance and confirm that the documentation matches the actual machine and configuration. Missing adapters or worn components can change the economics of an apparently inexpensive offer. A second hand fibre optic cable blowing machine should also be checked for spare part availability and support eligibility before purchase, without assuming that the original terms transfer automatically. Whether equipment is new or previously owned, a useful ownership estimate includes routine consumables, scheduled inspections, replacement wear items, transport, and any compressor costs attributable to the installation work. Keep assumptions realistic: productivity improvements depend on route conditions, operator competence, and preparation, not the machine alone. For equipment sourced from Italy and deployed elsewhere, check whether the supplied connections, documentation, and operating arrangements suit the destination. Discuss support access and the process for obtaining replacement components in advance. These checks turn a price enquiry into an operational decision, helping your business choose equipment on suitability, documented capability, and the full scope of ownership rather than an attractive initial figure.

Request an application-specific quotation from Fibernet

A productive conversation with Fibernet begins with a concise description of your next cable blowing assignment and the equipment needs that will follow it. Instead of requesting only a generic price list, explain the cable diameters you expect to handle, the duct dimensions, the typical section lengths, and the compressor resources available to your crews. Include any known restrictions, such as limited access space, frequent movement between locations, or a requirement to change cable sizes during a shift. These details help establish what must be verified before a machine configuration can be recommended. Your fibre cable blowing machine price enquiry can then address both the initial purchase and the practical arrangements needed to keep the equipment working. Fibernet's identity is closely connected with Italian technical experience and the Trinei family's involvement in the business. Giancarlo Trinei established the company in 2001 after working with early fibre installations in Italy, while a generational transition began in 2010 with the involvement of Matteo, Marta, and Ismael. The introduction of Lady in 2021 marked the company's entry into cable blowing machines. For a buyer, this background provides context, but the purchasing decision should still rest on the specifications, documentation, and commercial terms supplied for the actual offer. If Italian manufacture is a purchasing requirement, ask for confirmation of the proposed model's origin and the supporting documentation. Likewise, buyers coordinating installations in the United States or other international locations should request written details of the assistance available for their destination. Confirm the contact channel, service location, diagnostic process, replacement part arrangements, and any shipping responsibilities. Support coverage and response times should be established directly rather than inferred from a supplier's international presence. When comparing fiber cable blowing machine price proposals, give every supplier the same application brief so that differences in scope are visible. Ask for an itemised explanation of the machine configuration, included accessories, optional components, delivery charges, and payment conditions. A quotation should make clear what your crew will receive and what remains your responsibility to provide. If your procurement documents instead refer to OFC cable blowing machine price, include the full technical requirements alongside that terminology to avoid ambiguity. Before issuing an order, have the person responsible for field operations review the proposed package with purchasing. This final check can identify mismatched connections, overlooked accessories, or unsupported assumptions about compressor compatibility. Enter www.fibernetsrlusa.com to contact Fibernet with your installation requirements and request an application-specific quotation. A detailed enquiry gives both sides a stronger basis for discussing equipment suitability, commercial conditions, and the assistance arrangements relevant to your intended market.

Still looking for information about fibre cable blowing machine price?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information