Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
A useful fibre optic cable blower price starts with a clear description of the work your crew needs to complete, not an isolated equipment figure. Contractors comparing machines for projects in Italy should first establish cable outside diameter, duct inside diameter, expected route lengths, and the condition of the installed duct. These details help determine which equipment configuration deserves consideration and which accessories need to appear in the quotation. Fibernet can be contacted to discuss your application and request a proposal rather than relying on an advertised amount that may exclude essential components. For an English-speaking purchasing team, a written specification also makes it easier to compare the proposed supply with internal procurement requirements and the practical needs of the installation crew. When requesting a cable blower for fibre optic cable, provide the actual cable and duct specifications rather than describing the project only by its overall distance. The relationship between those dimensions affects available airflow and the suitability of seals, guides, and other contact components. Route bends, duct joints, elevation changes, and access arrangements also matter because laboratory expectations do not automatically translate into field performance. A responsible equipment discussion should distinguish the machine's documented operating limits from an installation distance that depends on site conditions. Ask which cable and duct combinations the proposed configuration supports, how adjustments are made, and which consumable parts are included. The quotation should clearly identify the machine, supplied accessories, optional items, delivery terms, applicable taxes, and the currency used. For purchasing decisions in Italy, clarify whether VAT is included or excluded and confirm the delivery destination before comparing totals. If your team operates internationally, ask separately about shipping arrangements and any destination-specific requirements. Avoid assuming that the compressor, air preparation equipment, hoses, or every adapter is supplied with the base machine. Those items can materially affect the budget, particularly when a contractor is equipping a crew for the first time. A comparison with another fibre optic cable blower should therefore use equivalent supply boundaries rather than headline figures alone. Fibernet introduced its first cable blowing machine, Lady, in 2021, building on the technical background of a business founded in 2001. Its made-in-Italy positioning gives buyers a concrete starting point for discussing equipment origin, documentation, and support requirements. Contact Fibernet through its website with your project specifications, preferred delivery timing, and anticipated workload. Request confirmation of current availability and the support arrangements relevant to Italy, the United States, or another operating location. The result should be a quotation your purchasing team can evaluate and your field supervisor can understand, with fewer assumptions left unresolved before an order is placed.
The amount paid for a cable blowing machine is only one part of its financial impact on an installation business. A low initial figure can become less attractive if the quoted configuration requires additional purchases before deployment, creates lengthy changeovers, or lacks a suitable maintenance plan. Conversely, a more comprehensive package is not automatically better value if its capabilities exceed the work you actually perform. Begin with the installation schedule: how often will the equipment be used, how many crews will share it, and how frequently will cable or duct sizes change? These questions help turn a fibre optic cable blower price enquiry into a practical assessment of equipment utilization. For a compressed air fibre optic cable blower, review the specified air supply requirements alongside the compressor available to your crew. Pressure alone does not describe compressor suitability; delivered airflow and the conditions under which it is measured also need attention. Ask the supplier to explain the requirements for the proposed machine and application, including any recommendations for air preparation. Moisture, contamination, unsuitable connections, and undersized hoses can undermine an otherwise carefully planned setup. Do not assume that buying a different blower will compensate for an unverified air supply or poorly prepared duct. Before making a purchasing decision, establish who will check these supporting elements and whether any corrective equipment belongs in the budget. Daily handling deserves the same attention as technical compatibility. Consider how the machine will move between the vehicle and the duct access point, what space is needed for setup, and how operators will inspect the equipment before starting work. Ask about adjustment procedures, cleaning requirements, replacement wear parts, and the documentation supplied with the machine. Where demonstrations are available, use cable and duct dimensions representative of your projects and record the test conditions. A demonstrated result is useful evidence for that setup, not a promise that every route will produce the same outcome. Businesses weighing ownership against fibre optic cable blower hire should compare an equivalent operating period and a realistic workload. Rental availability, collection arrangements, permitted usage, accessory charges, and responsibility for damage can influence the result. Ownership brings its own obligations, including storage, servicing, and the cost of keeping equipment available between projects. Fibernet can be approached for a purchase quotation and product clarification; any rental arrangement should be verified independently rather than assumed to be offered. For teams working in Italy, include local transport and site access constraints in the calculation. For American businesses coordinating equipment purchases across borders, also clarify the delivery destination, commercial terms, and support contact before authorizing expenditure. This approach keeps the buying decision tied to productive work, documented requirements, and a realistic operating budget instead of a speculative daily output figure.
Confidence in an equipment purchase depends partly on understanding the company behind it and knowing how questions will be handled after delivery. Fibernet was founded in 2001 by Giancarlo Trinei, whose technical experience reaches back to the early development of optical cable installations in Italy during the 1980s. That background provides context for the company's approach to practical engineering, while the introduction of Lady in 2021 marks its entry into cable blowing machines. The business also developed through a generational transition beginning in 2010, bringing Matteo, Marta, and Ismael into the company. For a buyer, this history is relevant when it leads to concrete conversations about product suitability, maintenance, and continuity of technical communication. Made-in-Italy equipment should be evaluated through documented specifications rather than origin alone. Ask Fibernet which configuration is appropriate for your intended cable and duct combinations, which operating instructions accompany it, and what conformity documentation applies to the destination and intended use. English-speaking businesses purchasing for work in Italy should confirm the language of the available documentation and the arrangements for technical communication. Buyers deploying equipment in the United States or elsewhere should request the same clarity for their own operating location. Discuss assistance in the United States and worldwide directly with Fibernet, including how enquiries are submitted, how problems are assessed, and whether a particular intervention requires shipment of equipment or parts. Do not treat international support as a guarantee of local attendance or a fixed response time unless those terms are explicitly confirmed. When assessing a fibre optic cable blower price, request warranty terms in writing and establish which responsibilities remain with the owner. Useful questions concern inspection intervals, consumable replacement, approved adjustments, and the process for reporting a fault. Keep the equipment identification and purchase documentation accessible so that a technical enquiry can describe the correct machine and configuration. Clear photographs and a record of operating conditions can also make troubleshooting discussions more useful, although any inspection or adjustment must follow the manufacturer's safety instructions. Buyers considering a used fibre optic cable blower need additional information before comparing its cost with a new machine. Age alone does not establish condition: maintenance history, wear, missing accessories, and previous modifications can all affect suitability. Confirm that the required components and documentation are available and ask whether the specific unit can still be supported. A second hand fibre optic cable blower may require expenditure before it is ready for your application, so an inspection and an itemized comparison are more informative than a simple discount percentage. To move forward with Fibernet, describe your planned operating location, equipment requirements, and purchasing timeline through the website. Ask for a current quotation that separates the proposed supply from optional items and states the applicable commercial and assistance terms. This creates a clearer basis for choosing Italian-made equipment with support expectations established before delivery.
Fill out the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.