Cable blowing machines · Made in Italy

Looking for "fibre cable blower price"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Understand what your cable blower quotation should include

A meaningful fibre cable blower price starts with the installation work your team needs to complete, not simply with a machine name. Cable dimensions, duct internal diameter, route conditions, and the available compressed air supply all influence equipment selection. For contractors evaluating equipment for projects in Italy or coordinating purchasing with American installation teams, the first step is to describe the intended application clearly. Fibernet can be contacted to discuss its cable blowing equipment and request a quotation based on the proposed use. Rather than assuming that every configuration includes the same components, ask for a written breakdown that identifies the machine, compatible accessories, and any additional items required before deployment. This makes the purchasing decision easier to explain internally and helps prevent an attractive initial figure from becoming an incomplete equipment budget. When preparing your enquiry, provide the actual cable outside diameter and the duct dimensions rather than relying only on nominal descriptions. Include information about expected installation lengths, changes in direction, access points, and whether the work involves repeated setups across several locations. These details do not guarantee a particular blowing distance, but they help establish which technical questions need answering before a machine is selected. A cable blower for fibre optic cable must be assessed as part of an installation arrangement that also includes suitable air delivery, compatible sealing components, and appropriate cable handling. Ask which elements are included in the proposed configuration and which remain the contractor's responsibility. The commercial comparison should also address delivery arrangements, applicable taxes, shipping, and the currency used in the quotation. For purchases involving Italy and the United States, clarify the destination and purchasing entity early so that transport responsibilities and any import requirements can be considered accurately. Avoid treating an advertised figure as a delivered cost unless the supplier explicitly confirms that scope. The same principle applies when comparing a fibre optic cable blower price across different offers: two totals may represent substantially different packages. Fibernet introduced its first cable blowing machine, Lady, in 2021, building on a business established in 2001 and a technical background developed over decades. Its Italian product identity is relevant to buyers seeking equipment made in Italy, but the quotation should still be evaluated through practical questions about compatibility, operating requirements, and support. Request information about assistance in the United States and worldwide, including the process for obtaining technical advice and replacement components. A useful quotation gives your purchasing team a defined scope and gives your installation supervisor a clearer understanding of what must be ready on site. That combination is more valuable than a headline number without the details needed to put the machine to work.

Connect the equipment cost to real installation conditions

The lowest purchase figure does not automatically produce the lowest cost for a completed cable installation. A machine that is poorly matched to the cable, duct, or air supply can create avoidable interruptions, while an appropriate configuration can support a more organized installation process. When assessing a fibre cable blower price, consider how the equipment will fit into the actual working day. Your crew may need to unload the machine, position it beside an access point, prepare the cable feed, connect the air supply, and check the installation arrangement before blowing begins. Every additional setup requirement should be understood before purchase, especially when teams move between several work areas during the same shift. Start by reviewing the route rather than asking for an unconditional distance claim. Duct continuity, internal cleanliness, bends, elevation changes, and cable characteristics all affect the conditions under which a cable blowing machine operates. Confirm that the duct has been prepared and checked according to the applicable project procedures. Ask the supplier to explain the proposed machine's operating requirements and the limits that must be respected for both the cable and the duct system. Any assessment of expected performance should refer to defined conditions rather than a promise that one result will apply to every job. Compressed air deserves particular attention because pressure alone does not describe the complete supply requirement. Ask about the necessary airflow, acceptable operating pressure, connection arrangements, and any air treatment requirements specified for the selected equipment. Confirm those details against the compressor available to your team. If an additional compressor or accessory is needed, include that cost in the project budget instead of discovering it after delivery. This is also why a fibre cable blowing machine price should be compared using equivalent equipment boundaries: a machine quotation and a complete working package are not necessarily the same offer. Operator control and cable protection are equally important topics for the technical discussion. Ask how the proposed equipment feeds the cable, which adjustments are available, and what procedures should be followed when resistance increases or progress stops. Do not assume that a feature is present without confirmation for the specific configuration. Request the relevant operating documentation so your supervisor can assess preparation, routine checks, and safe working requirements. For a contractor managing multiple teams, purchasing decisions should also consider repeatability. Clear configuration records, compatible spare items, and an understood support contact can make it easier to prepare subsequent jobs consistently. Discuss these needs with Fibernet when requesting information about its Italian-made cable blowing equipment. The objective is not to assign an unsupported productivity figure to the machine, but to understand whether the proposed solution matches your installation conditions and operational priorities.

Evaluate long-term ownership and support before ordering

Purchasing a cable blowing machine creates responsibilities that continue beyond the delivery date. Your business needs to know how the equipment will be maintained, where technical questions should be directed, and what happens if a component needs replacement during an active project. A fibre cable blower price becomes more useful when it is considered alongside those ownership requirements. Ask Fibernet to explain the assistance arrangements available in the United States and worldwide for the model under discussion. Confirm the contact route, the information needed to identify a technical issue, and how replacement parts are requested. Response times, stock availability, and repair arrangements should be verified directly rather than assumed from the presence of international support. A practical ownership review begins with the manufacturer's documentation. Request the maintenance schedule, cleaning guidance, inspection requirements, and instructions for storing and transporting the machine. Identify any components that require periodic attention and ask which spare items are appropriate for your expected workload. The answer may depend on the selected configuration and application, so avoid building a spare parts budget around generic assumptions. Keeping a record of the machine identification, supplied accessories, and approved setup information can also help your team communicate more clearly when requesting assistance. Buyers comparing new equipment with a used fibre cable blower should apply a different level of scrutiny to the secondhand option. Establish its identity, age, condition, maintenance history, and completeness before treating the asking price as a genuine saving. Check whether the supplied components match your intended cable and duct dimensions, and ask whether operating documentation is available. Confirm whether parts and technical assistance can still be obtained for that particular machine. A missing accessory, undocumented repair, or unsuitable configuration can change the economics substantially, even when the initial purchase cost appears attractive. Fibernet's company background offers additional context for buyers evaluating a long-term supplier relationship. Founded in 2001, the business draws on the technical experience of Giancarlo Trinei, whose work with early Italian cable installations dates back to the 1980s. The involvement of Matteo, Marta, and Ismael from 2010 marked a generational transition while retaining the company's family foundations. For procurement teams, that history is most useful when translated into specific conversations about the equipment, documentation, and support they need today. Before approving an order, bring the commercial and technical details together in one review. Confirm the configuration, delivery scope, payment terms, applicable warranty conditions, and arrangements for requesting help after purchase. For organizations purchasing in Italy or supporting American field operations, state where the machine will actually be used so the discussion reflects the correct destination. Contact Fibernet through www.fibernetsrlusa.com with your application details and request a quotation that addresses both the initial investment and the practical requirements of ownership.

Still looking for information about fibre cable blower price?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information