Cable blowing machines · Made in Italy

Looking for "fiber optic cable installation machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around the installation, not just the machine

Choosing a fiber optic cable installation machine starts with understanding the cable and duct combination that your crew will actually encounter. Cable outside diameter, duct internal diameter, cable stiffness, route length, bends, and elevation changes all influence the installation process. A machine that appears suitable on diameter alone may still require different guides, seals, or drive components to handle a particular cable correctly. For contractors working on projects in Italy, documenting these conditions before requesting equipment advice makes the discussion more productive. Share the cable manufacturer's installation limits alongside the duct specifications, and distinguish between a straight test section and a route containing multiple changes of direction. This gives Fibernet a useful basis for discussing an appropriate configuration without relying on an unrealistic promise of universal performance. A cable blowing machine for fiber optic cable installation combines controlled mechanical feeding with airflow through the duct. The drive system introduces the cable while the moving air helps carry it along the route. Successful operation depends on balancing these elements rather than simply increasing pressure or pushing harder. Excessive drive force can damage a cable, while unsuitable airflow, leaks, or restricted passages can prevent steady advancement. Operators should therefore work within the limits specified for the cable, duct, machine, and associated equipment. Before starting, check duct continuity, connections, cleanliness, and the suitability of any lubricant for the materials involved. Confirm that the selected seals match the actual dimensions rather than relying only on nominal sizes. When comparing a compressed air fiber optic cable blowing machine with another configuration, ask how its required air supply relates to the compressor available on site. Pressure alone does not describe compressor suitability: delivered airflow, air quality, hose arrangement, and pressure losses also matter. The equipment supplier should explain the relevant requirements for the proposed setup. Practical planning should also cover machine positioning, safe access to controls, cable reel alignment, and communication between people at different points along the route. These details help crews recognize a developing problem before it becomes cable damage or a prolonged stoppage. Fibernet's Italian-made cable blowing equipment can be discussed in the context of these real operating conditions, with assistance available in the United States and worldwide. For procurement teams in Italy coordinating with American contractors, a clear technical brief helps keep expectations aligned across locations. Request confirmation of cable and duct compatibility, included accessories, operating requirements, and support arrangements before ordering. The goal is not simply to acquire a machine, but to select a workable installation setup that operators can prepare, control, and maintain consistently.

Italian engineering with a practical approach to ownership costs

An equipment quotation becomes useful when it explains what your crew will receive and what the installation setup still needs. When evaluating a fiber optic cable installation machine, look beyond the initial purchase amount and establish whether the proposed configuration includes the guides, seals, drive components, and connection accessories required for your cable and duct sizes. Ask which items are consumables, which are reusable, and which must change when moving between cable diameters. This makes comparisons more meaningful and reduces the risk of discovering a missing component only after equipment reaches the worksite. Compressor compatibility deserves the same attention because an unsuitable air supply can undermine an otherwise appropriate machine selection. A fiber optic cable blowing machine price should therefore be considered alongside the cost of preparing the full operating setup. Depending on the project, that assessment may include compressor provision, compatible hoses, replacement wear parts, transport, and routine servicing. Avoid assuming that a higher specification automatically produces better results on every route. The relevant question is whether the configuration matches the cables, ducts, operating conditions, and working practices involved. Ask suppliers to explain quoted capabilities and the conditions under which any performance figures were obtained. Demonstration results are most informative when the cable construction, duct dimensions, bends, and air supply resemble your own application. Fibernet brings a technical background rooted in Italy to this purchasing discussion. Founded in 2001, the company draws on founder Giancarlo Trinei's experience with early Italian fiber installations during the 1980s. Its development work led to the launch of the Lady cable blowing machine in 2021. That history provides context for the company's product focus, but buyers should still evaluate the exact proposed model against their documented installation requirements. Italian manufacturing is most valuable to the customer when it is accompanied by clear specifications, suitable accessories, and accessible technical guidance. Companies considering a used fiber optic cable blowing machine should apply an equally structured review. Inspect the condition of cable-contact surfaces, seals, guides, controls, and air connections, and request available maintenance records. Confirm that replacement parts and operating documentation can be obtained for the specific version under consideration. A lower acquisition cost can lose its advantage if essential components are worn or the required configuration is unavailable. For projects based in Italy or coordinated with American installation teams, clarify delivery arrangements and the practical scope of assistance before committing. Fibernet offers assistance in the United States and worldwide; ask how that support applies to your location, equipment, and anticipated needs. An informed decision balances purchase cost with compatibility, maintainability, and the ability to keep the installation process under control.

Prepare crews for controlled operation and dependable maintenance

On installation day, reliable progress begins before the first cable enters the machine. Position the equipment so the cable can approach the drive path smoothly, and arrange the reel to avoid unnecessary resistance or sharp changes in direction. Check that the machine is stable, the work area is controlled, and operators can reach the relevant controls without moving through an unsafe space. Inspect hoses and couplings according to their manufacturers' instructions, and establish how the team will isolate and release compressed air safely. These preparations are essential whenever a fiber optic cable installation machine is used, regardless of the anticipated route length. A brief discussion between crew members should establish who controls feeding, who monitors the reel, and how a stop instruction will be communicated. Before operating a cable jetting machine for fiber optic cable installation, verify that the installed guides and seals correspond to the actual cable and duct dimensions. Check the cable manufacturer's limits and use the machine's operating documentation to set up the feeding system correctly. Start cautiously and observe whether the cable advances smoothly. If progress becomes irregular, investigate rather than automatically increasing force or air pressure. Possible causes include reel resistance, an unsuitable seal, leakage, contamination, excessive route resistance, or a problem at a duct connection. Troubleshooting should follow the equipment instructions and site safety procedures, including isolation before any intervention that requires it. Recording operating observations can make later work more predictable. Useful notes include the cable and duct identification, installed accessories, route characteristics, compressor arrangement, interruptions, and the actions taken to resolve them. These records do not guarantee that another route will behave identically, but they help distinguish recurring setup issues from conditions specific to one section. They also make conversations with technical support more precise. When requesting assistance for a pneumatic fiber optic cable blowing machine, provide the equipment identification, a description of the symptoms, and relevant setup information instead of relying on a general statement that the cable will not advance. Maintenance should be built into the working routine rather than postponed until a stoppage occurs. Inspect cable-contact components for wear, keep the equipment clean using approved methods, and follow the prescribed checks for drive mechanisms, seals, and air connections. Store accessories so their dimensions and condition can be identified easily before the next job. Fibernet's Italian-made equipment is supported by assistance in the United States and worldwide, allowing customers to discuss operating questions and support needs across different project locations. Teams working in Italy should confirm the applicable service arrangements and documentation when selecting equipment. With careful preparation, measured operation, and a consistent maintenance routine, crews are better equipped to protect the cable, identify installation constraints, and reduce avoidable interruptions.

Still looking for information about fiber optic cable installation machine?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information