Cable blowing machines · Made in Italy

Looking for "drill powered fibre optic cable jetting machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match your drill powered jetting setup to the installation

Choosing a drill powered fibre optic cable jetting machine starts with the cable, the duct, and the conditions your crew will encounter, rather than with a headline installation speed. A drill supplies mechanical drive to the feeding mechanism, while compressed air supports cable movement through the duct in a compatible jetting configuration. These functions work together, but they are not interchangeable: a cordless drill does not remove the need to assess compressed air requirements. Before selecting equipment, establish the cable outside diameter, duct internal diameter, cable construction, planned section length, and the number and severity of bends. These details help determine whether a proposed machine configuration is suitable and what accessories or supporting equipment may be required. For contractors preparing installations in Italy, clear technical communication in English can also simplify equipment evaluation across international purchasing and installation teams. Fibernet brings an Italian manufacturing background to this discussion, with support available in the United States and worldwide. The practical objective is to identify a setup that fits the work rather than assume that one arrangement will cover every route. When reviewing a drill driven fibre optic cable jetting machine, ask how the cable is guided, how feeding pressure is adjusted, and which seals and duct connections are specified for your dimensions. An unsuitable seal can allow air leakage, while excessive gripping pressure can damage a cable jacket. Operators should follow the machine documentation and the cable manufacturer's installation limits, including any restrictions on pushing force and bending radius. Drill compatibility also deserves attention: coupling arrangements, operating direction, speed control, and permitted torque must be confirmed for the particular model. A battery powered fibre optic cable jetting machine may be considered alongside drill driven equipment, but the meaningful comparison is the complete working arrangement, not simply the source of rotational power. Include the compressor, connecting hoses, air treatment requirements, cable payoff arrangement, and available working space in that comparison. A compact machine still needs a stable setup and an unobstructed cable feed. Share these site details with Fibernet when requesting product guidance through www.fibernetsrlusa.com. Ask for the applicable operating documentation and confirmation of the proposed configuration before committing to a purchase. This approach gives purchasing staff a clearer basis for approval and helps installation supervisors prepare the correct equipment before mobilization. It also separates verified machine capabilities from assumptions about distance or productivity. Actual results depend on route preparation, duct condition, cable characteristics, air supply, and operator technique, so a responsible selection process considers all of these factors together.

Prepare the duct, air supply, and cable feed before starting

A successful jetting operation is usually shaped before the cable begins moving. Start by checking that the installed duct is continuous, correctly connected, and suitable for the planned operation. Follow the relevant procedures for verifying duct integrity, cleanliness, and pressure suitability, using approved equipment and safe working methods. Water, debris, poorly aligned connections, or an unexpected restriction can interrupt progress even when the feeding machine is correctly selected. Establish where the cable will enter, how the drum will be positioned, and how personnel will communicate between accessible points. The drum should allow controlled payoff without introducing unnecessary tension or tight bends at the machine inlet. For a drill powered fibre optic cable jetting machine, inspect the drill connection, cable guides, seals, and gripping components before operation. Adjustments should follow the equipment instructions rather than trial and error under load. Confirm that guards and safety features are in place and that the operator can stop the process promptly. Compressed air introduces its own hazards, so hoses, couplings, and duct connections must be appropriate for the specified working conditions. Never disconnect pressurized components or attempt to clear a blockage while the system remains energized or pressurized. A compressed air fibre optic cable jetting machine also needs an air supply assessed for both pressure and flow. Compressor pressure alone does not establish suitability; the available airflow at the required operating conditions matters as well. Hose length, restrictions, leaks, and air treatment can influence what reaches the machine. Ask Fibernet to clarify the requirements for the proposed configuration instead of selecting a compressor from an isolated pressure figure. During installation, monitor cable movement and respond to unusual resistance according to the operating procedure. Increasing drive force indiscriminately can turn an underlying duct problem into cable damage. If progress becomes inconsistent, stop safely and investigate the possible causes, including drum resistance, inlet alignment, sealing, and route conditions. Suitable lubricant may help where approved by the cable, duct, and equipment manufacturers, but it should never be treated as a substitute for a clean, sound route. Contractors considering a pneumatic fibre optic cable jetting machine should apply the same discipline when evaluating its feeding controls and compressed air demands. Keep a simple installation record noting the configuration, cable and duct sizes, route details, relevant settings, interruptions, and observed results. Such records make future planning more reliable without implying that every section will perform identically. Through www.fibernetsrlusa.com, installation teams can discuss these operating requirements with Fibernet and request guidance on equipment selection, documentation, and support for their intended work in Italy or other project locations.

Evaluate the complete purchase and long-term support

An equipment quotation is most useful when it explains exactly what the contractor will receive and what must be supplied separately. When assessing a drill powered fibre optic cable jetting machine, request an itemized configuration covering the machine, applicable cable guides, seals, duct connections, drive coupling, and any other components needed for the intended installation. Confirm whether the drill, compressor, hoses, and consumable items are included or require separate sourcing. This prevents a seemingly complete purchase from arriving without a component needed on site. The same care applies to technical documentation: ask for operating instructions, maintenance guidance, applicable safety information, and confirmation of the electrical or mechanical interfaces relevant to your setup. For equipment intended for use in Italy, clarify the documentation and conformity requirements that apply to the supplied configuration. Fibernet was founded in 2001 and draws on the technical experience of founder Giancarlo Trinei, whose work with cable installation and testing began in the early years of the industry in Italy. The company's development of cable blowing equipment included the launch of Lady in 2021. That background provides context for a product discussion, but purchasing decisions should still rest on verified specifications and the needs of your projects. Made in Italy manufacturing, together with assistance in the United States and worldwide, can be relevant for contractors coordinating purchasing, deployment, and support across borders. Before ordering, clarify the appropriate support contact, service arrangements, spare parts availability, warranty terms, and shipping responsibilities for your destination. Avoid assuming that every accessory is interchangeable or that service conditions are identical in every country. A useful discussion of fibre optic cable jetting machine price therefore goes beyond the initial machine cost. Include replacement wear components, supporting air equipment, routine maintenance, transport protection, and the operational consequences of waiting for a missing part. These factors help you compare complete proposals on a consistent basis. If you are also considering a used fibre optic cable jetting machine, assess its documented condition, service history, included accessories, and availability of replacement components. An apparently lower purchase price may not represent better value if the configuration does not fit your cable and duct sizes. For a new purchase, provide Fibernet with a concise description of recurring installation tasks and any unusual route constraints. Request written confirmation of the proposed equipment scope and ask which specifications require further verification. Explore www.fibernetsrlusa.com to start that conversation and obtain product information relevant to your requirements. A well-defined purchase gives both the supplier and your installation crew a shared understanding of the intended application, the supplied components, and the support arrangements available after delivery.

Still looking for information about drill powered fibre optic cable jetting machine?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information