Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a drill powered fibre optic cable blowing machine starts with understanding the installation rather than comparing equipment names alone. For contractors preparing cable blowing work in Italy, the useful questions concern cable diameter, duct internal diameter, route condition, access arrangements, and the compressed air supply available at the launch point. These details help establish whether a proposed configuration suits the job. Fibernet brings Italian manufacturing and practical technical experience to this conversation, helping prospective buyers discuss their requirements before requesting a quotation. Its background matters because a machine must work as part of an installation setup, not as an isolated item on a purchasing list. A drill provides the mechanical drive in this equipment category, while compressed air supports cable movement through a suitable duct. The exact operating arrangement, compatible drill, and air requirements must always be checked against the selected machine documentation. A cordless drill does not automatically make the entire installation independent of external equipment. Buyers comparing a battery powered fibre optic cable blowing machine should therefore clarify which component uses battery power and which supporting resources remain necessary. This distinction makes procurement discussions more precise and prevents misunderstandings when equipment reaches the site. Before choosing a configuration, record the cable manufacturer's permitted installation limits and confirm the condition of the duct. Check whether the route includes tight bends, changes of direction, intermediate access points, or sections that could restrict airflow. Duct cleanliness, continuity, and joint integrity deserve attention because excessive resistance or air leakage can undermine an otherwise appropriate setup. Where required, carry out duct preparation using the relevant project procedures before introducing the cable. Operators should also plan how the cable reel will feed toward the machine without unnecessary drag or abrupt changes in direction. Machine positioning, reel alignment, and a clear working area contribute to controlled handling. When discussing a compressed air fibre optic cable blowing machine, provide the available compressor specifications rather than assuming that pressure alone determines suitability. Required airflow, air quality, hose arrangements, and operating limits depend on the equipment and application. Ask Fibernet to confirm the relevant requirements for the proposed configuration. A useful enquiry therefore combines cable and duct dimensions with route information, expected working conditions, and the equipment already owned by the installation team. This gives the supplier a sound basis for explaining compatibility, identifying questions that need further investigation, and preparing a relevant commercial proposal. Instead of buying on an assumed distance claim, contractors can make a decision based on their actual installation constraints and the documented capabilities of the machine under consideration.
A useful equipment quotation explains what the installation team will receive and what it must supply separately. When evaluating a drill powered fibre optic cable blowing machine, ask for a clear description of the proposed configuration, its supported cable and duct dimensions, and any components required to change between approved sizes. Confirm whether the drill, air connections, sealing components, carrying arrangements, and other accessories are included or quoted separately. These points should be established in writing because product photographs do not necessarily define the contents of a commercial offer. For procurement teams researching fibre optic cable blowing machine price, the purchase figure is only one part of the assessment. Compatibility with planned work, the availability of replacement wear components, maintenance requirements, and access to technical assistance can all influence the practical cost of ownership. Request information about routine inspection and servicing before comparing offers. A lower initial figure may not represent better value if the supplied configuration cannot support the cable and duct combinations used on your projects. Equally, additional accessories provide little benefit when they do not address a genuine operational requirement. Build the comparison around representative jobs rather than an imagined maximum workload. For example, a contractor frequently moving between access points may place particular importance on transport arrangements and setup requirements. Another team working with several approved cable sizes may need clarity on changeover components and the checks required after adjustment. Neither case establishes a universal best machine; each creates a different purchasing brief. If your existing cordless tools are central to the decision, discuss their specifications with Fibernet instead of assuming compatibility. A drill driven fibre optic cable blowing machine must be paired with a suitable drive arrangement in accordance with the applicable instructions. Confirm the permitted operating mode, attachment method, and any restrictions before putting the equipment into service. The same careful approach applies to compressor selection and the air supply connection. Commercial discussions should also cover delivery arrangements for Italy, documentation language, warranty conditions, and the process for obtaining assistance. Buyers coordinating projects across borders can ask how support enquiries, replacement component requests, and service shipments are handled for each destination. Fibernet offers Italian-made products with assistance in the United States and worldwide; the exact service arrangements applicable to a purchase should be confirmed directly. To obtain a useful proposal, submit your normal cable sizes, duct sizes, route characteristics, available drive equipment, and compressor details together. Explain whether the purchase is intended for a specific contract or repeated deployment across several crews. This allows the discussion to focus on an appropriate configuration, clear supply boundaries, and the practical information needed to make a defensible purchasing decision.
Fibernet's cable blowing equipment reflects a business built on technical experience and family continuity. Founded in 2001, the company draws on the background of Giancarlo Trinei, whose work with optical fibre installations began in Italy in the early 1980s. That experience provides context for the company's approach to developing equipment for installers facing practical challenges in the field. The arrival of Matteo, Marta, and Ismael in the business in 2010 marked a generational transition, followed in 2021 by the launch of Fibernet's first cable blowing machine, Lady. These milestones describe the manufacturer's history; suitability for your project still depends on checking the selected equipment against your application. For a buyer considering a drill powered fibre optic cable blowing machine, manufacturer access is particularly valuable when questions involve configuration, operating documentation, or component identification. Useful support begins with accurate information from the site. Keep the machine identification, configuration details, cable dimensions, duct dimensions, and relevant operating observations available when requesting assistance. If cable movement becomes irregular, follow the equipment's stopping and isolation procedures rather than trying to overcome resistance by increasing force or pressure. Once the equipment is safe, a structured review can consider reel feed, duct preparation, sealing condition, alignment, and the air supply within the limits of the applicable instructions. Remote advice cannot replace site safety procedures or a competent assessment of local conditions. It can, however, help the team explain the issue clearly and identify the next appropriate checks. Contractors comparing a used fibre optic cable blowing machine with a new purchase should investigate more than cosmetic condition. Ask about identification records, maintenance history, compatibility documentation, missing accessories, and the availability of suitable replacement components. Any previous modifications should be disclosed and assessed before operation. The potential saving needs to be weighed against uncertainty over condition and the work required to establish a dependable configuration. For new equipment, discuss inspection routines and storage recommendations from the outset. Cleaning and checking the relevant components according to the manufacturer’s instructions can help crews identify wear before the next deployment. Keep approved accessories organized and record changes to the working configuration so that different operators do not rely on assumptions. When assessing a drill powered fibre optic cable jetting machine, terminology alone should never substitute for a documented explanation of how the proposed model operates. Ask Fibernet to clarify the drive method, air requirements, dimensional compatibility, and supplied components. Its Italian-made product offering is supported by assistance in the United States and worldwide, while buyers working in Italy can confirm the arrangements relevant to their location. Contacting the company with a detailed installation brief creates a practical starting point for product selection and ongoing technical discussions.
Fill out the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.