Cable blowing machines · Made in Italy

Looking for "drill powered fibre cable blower"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match your cable blowing equipment to the actual job

Choosing a drill powered fibre cable blower starts with the conditions your installation team will encounter, not simply the length of cable on the reel. Cable diameter, duct internal diameter, route geometry, available compressed air, and access arrangements all influence whether a proposed setup is appropriate. For contractors working on projects in Italy, including American companies coordinating local installation crews, these details should be established before equipment is selected. Fibernet brings Italian manufacturing and a practical technical background to the discussion, helping prospective customers focus on the relationship between the machine, the cable, and the installation environment. A useful initial enquiry includes the cable specification, duct dimensions, expected section lengths, and any known bends or changes in elevation. These details provide a stronger basis for advice than a distance target alone. A drill driven fibre cable blower uses a drill to provide mechanical drive, while the blowing process also depends on a suitable compressed air supply. The drill should therefore never be treated as a replacement for the compressor. Compatibility must be checked across the complete setup, including the drive interface, cable gripping arrangement, duct connection, seals, and air supply requirements. Ask which drill characteristics are required, how the drive is controlled, and which accessories are needed for the cable and duct combination you intend to use. Where technical documentation gives operating limits, those limits should guide the selection rather than assumptions based on another machine. Before blowing begins, the crew should confirm that the duct is suitable for the planned operation and prepared according to the relevant procedures. Contamination, water, damaged connections, and unexpected restrictions can undermine progress even when the equipment itself is correctly selected. Reel positioning also matters: the cable needs an orderly feed path that avoids unnecessary resistance and respects its handling limits. During installation, operators should watch for changes in feed behaviour and follow the manufacturer's instructions when adjusting or stopping the machine. Increasing drive force or air pressure without understanding the cause of a slowdown can create avoidable risks. When comparing a cable blower for fibre optic cable, request an explanation of setup, adjustment, inspection, and routine maintenance as well as the basic specification. These operational details help supervisors understand what the crew must prepare and what support might be needed on site. Fibernet's company history dates to 2001, with the first Lady cable blowing machine launched in 2021. That background gives customers a clear starting point for discussing Italian-made equipment, while a project-specific consultation helps establish which configuration, accessories, and operating requirements should be verified before a purchase decision.

Plan the complete setup, not just the machine purchase

An accurate equipment budget depends on knowing what the proposed supply actually includes. When requesting a quotation for a drill powered fibre cable blower, describe both your immediate installation and the range of work you expect the equipment to support later. A crew handling one consistent cable and duct combination may need a different accessory package from a contractor moving between several specifications. Ask for an itemised explanation of the machine configuration, compatible accessories, required external equipment, and any optional components. This makes it easier to compare proposals on a like for like basis and reduces the chance of discovering missing items shortly before mobilisation. The drill, compressor, air treatment arrangements, hoses, and connections should all be discussed explicitly rather than assumed to be included. A meaningful fibre cable blower price is therefore more than a headline figure. It reflects the supplied configuration and should be considered alongside preparation time, maintenance needs, replacement parts, and the support arrangements available for the intended operating location. Avoid estimating installation costs from an advertised maximum distance alone. Actual progress depends on cable and duct compatibility, route condition, air delivery, crew procedures, and environmental factors. A carefully documented equipment selection is more useful than a promise that ignores these variables. For projects in Italy, clarify delivery arrangements, applicable documentation, and the technical information needed by the people responsible for site safety and equipment acceptance. Where American contractors are involved, providing both metric measurements and their customary unit equivalents can help prevent specification errors, provided every conversion is checked. Scheduling deserves the same attention as purchasing. Before the machine reaches the site, confirm that the selected drill is available, the compressor can meet the documented requirements, and the necessary connections fit the proposed setup. Identify who will inspect the equipment, who will operate it, and how technical questions will be escalated. Keep the relevant instructions accessible to the crew rather than relying on a brief verbal handover. A drill powered fibre optic cable blowing machine should be assessed as part of this complete working arrangement, not as an isolated item. Fibernet's Italian-made product proposition includes assistance in the United States and worldwide, giving internationally active customers a basis for discussing support across locations. Ask which contact channel applies to your project, what information is needed for troubleshooting, and how spare parts are supplied. Availability, response times, shipping conditions, and service scope should be confirmed directly rather than assumed. Finally, record the agreed configuration and retain the quotation alongside the technical documentation. This gives purchasing staff, supervisors, and operators a shared reference when preparing the first installation or planning subsequent work with different cable dimensions.

Build repeatable working practices around Italian-made equipment

Reliable cable blowing work depends on repeatable preparation and clear decisions during the installation. A drill powered fibre cable blower can form part of that process, but its usefulness depends on selecting a compatible configuration and operating it within documented limits. Consider a contractor preparing several duct sections across an Italian project: although the same machine may be proposed for each section, the crew still needs to review changes in cable dimensions, access, route condition, and available air supply. Treating every section as identical can conceal the very differences that affect progress. A short, consistent equipment check helps the team establish whether the planned arrangement remains appropriate before starting the next run. Begin with the machine disconnected from its energy sources in accordance with the manufacturer's instructions. Inspect the accessible components identified in the maintenance documentation, check that the selected seals and guides match the intended application, and look for damage or wear that requires attention. Confirm the security of connections before introducing compressed air, and follow the prescribed isolation and depressurisation procedure before opening any pressurised assembly. These precautions are especially important when crews change accessories between installations. The appropriate operating manual and site safety procedures remain the authority for the exact sequence. When evaluating a drill powered cable blower, ask how operators recognise incorrect adjustment and what checks are required after a stoppage. Practical questions about access to service items, cleaning procedures, and replacement components can reveal more about day to day ownership than a broad performance claim. Keep a simple record of the cable and duct specifications, equipment configuration, relevant operating observations, and any interruptions. Such records help technical support distinguish a possible machine issue from a route restriction or an unsuitable setup. They also make future purchasing discussions more precise. A battery powered fibre cable blower may appear in the same equipment comparison, but the terminology needs clarification. Ask whether battery power refers to a cordless drill supplying the drive or to a different machine architecture, and verify what compressed air supply is still required. Do not assume that a battery reference means the entire blowing operation is independent of external air equipment. Fibernet's approach is rooted in the technical experience of founder Giancarlo Trinei and the family business established in 2001. The later involvement of Matteo, Marta, and Ismael continued that development, while the launch of Lady in 2021 marked the company's entry into its own cable blowing machine range. For customers assessing Italian-made equipment, that history provides context rather than a substitute for technical verification. Discuss your operating requirements with Fibernet, confirm assistance arrangements for Italy, the United States, or other project locations, and request the documentation needed to make an informed equipment decision.

Still looking for information about drill powered fibre cable blower?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information