Cable blowing machines · Made in Italy

Looking for "drill powered fibre cable blowing machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match your blowing machine to the cable, duct and working conditions

Choosing a drill powered fibre cable blowing machine starts with the installation you need to complete, not with an isolated speed figure. Contractors working on projects in Italy should establish the cable diameter, duct internal diameter, route length and expected changes in direction before selecting equipment. These details help determine whether a proposed machine configuration suits the job and which accessories require confirmation. Fibernet develops Italian-made cable blowing equipment and provides assistance in the United States and worldwide, giving American contractors a manufacturer to contact when evaluating equipment for projects at home or overseas. The practical objective is straightforward: identify a suitable setup before the crew arrives at the access point, with fewer unanswered questions about compatibility, preparation and operation. A drill powered fibre optic cable blowing machine combines mechanically controlled cable feeding with compressed air introduced into the duct. The drill provides the mechanical drive; it does not replace the air supply needed for the blowing process. Consequently, equipment selection must consider the compressor as well as the machine. Ask which airflow and operating pressure the proposed configuration requires, how the air connection is arranged and what air preparation is recommended. Do not assume that a compressor already available on site will be suitable merely because its maximum pressure appears adequate. Delivered airflow, hose arrangement and operating conditions also matter. Cable handling deserves equally careful attention. Verify the supported cable dimensions, the required duct connection components and the manufacturer's guidance for setting the feeding mechanism. Excessive contact pressure can damage a cable, while insufficient grip can cause slipping. The correct adjustment depends on the actual cable and the machine configuration, rather than a universal setting. Before production work begins, inspect the duct, check its continuity using an appropriate approved procedure and confirm that joints and terminations are suitable for the intended operation. Reel positioning should allow controlled payout without introducing unnecessary resistance or tight bends. When comparing a drill driven fibre cable blowing machine with another configuration, focus on the complete working arrangement: drive compatibility, available accessories, access around the equipment and the steps required between installations. A compact appearance alone does not establish suitability for a particular route. Give Fibernet the actual project information and request confirmation of the proposed combination before ordering. For American teams operating in Italy, it is also sensible to document cable and duct dimensions consistently in millimetres and to confirm any conversions used in purchasing records. Clear specifications help the purchasing team, site supervisor and operator work from the same requirements. The result is a better-informed equipment decision grounded in the installation conditions rather than an unsupported promise of distance or productivity.

Build a repeatable setup without assuming every route behaves alike

On a cable blowing job, the first few metres can reveal problems that a purchasing specification cannot. An uneven cable payout, a leaking duct connection or an unsuitable feeding adjustment may prevent stable progress even when the machine itself is appropriate. A drill powered fibre cable blowing machine should therefore be introduced into a documented site procedure that covers preparation, startup, monitoring and shutdown. Begin by establishing a safe working area around the reel, machine and compressor. Keep hoses and connections protected from passing vehicles and make sure the operator can reach the controls without stepping across the cable path. Follow the equipment instructions for securing the machine and connecting the selected drill; the appropriate drill type and settings must be confirmed for the specific configuration. Before introducing air, check that the duct connection is correctly assembled and that personnel at other access points understand the planned operation. Compressed air creates hazards, particularly if fittings become detached or debris is expelled from an open duct. Use the protective measures and operating limits specified by the equipment manufacturer and the applicable site procedures. Never disconnect a pressurised connection or investigate a blockage while the system remains energised. During startup, introduce the feeding action and air according to the operating instructions rather than applying maximum available drive immediately. Watch for slipping, unusual cable movement, unstable payout or a sudden change in resistance. If progress deteriorates, stop and investigate instead of treating additional pushing force as the default solution. Possible causes include a duct obstruction, a difficult bend, an air leak or resistance at the reel. A battery powered fibre cable blowing machine may appeal to crews seeking a cordless mechanical drive, but the exact power arrangement must be checked with the supplier. A battery-powered drill does not make the overall blowing process independent of compressed air, and battery availability does not establish how long a particular installation will take. Planning should therefore include compatible charged batteries where relevant, the correct charging arrangements and an adequate air supply. For teams assessing a drill powered cable blowing machine, useful operational questions include how cable-contact components are inspected, how different duct sizes are accommodated and which parts should be available before a remote job begins. Ask Fibernet about the maintenance requirements and replacement components applicable to the proposed model rather than assuming that every machine uses the same consumables. Record the configuration used for each completed run, together with the cable, duct and relevant site observations. These records help crews recognise recurring installation difficulties and prepare subsequent work more accurately. They also provide a clearer starting point when requesting technical assistance from Fibernet in the United States or elsewhere. Consistency comes from controlled preparation and informed adjustments, not from expecting identical results on every route.

Evaluate Italian-made equipment through lifetime cost and practical assistance

A useful equipment quotation explains what your crew will receive and what still needs to be arranged. When requesting a drill powered fibre cable blowing machine, provide Fibernet with your intended cable sizes, duct sizes, installation environment and expected working pattern. Ask for an itemised proposal identifying the machine configuration, included connection components, any required accessories and the equipment that the contractor must supply separately. This is particularly important when comparing offers that appear similar but include different tooling or drive arrangements. Confirm whether the drill, compressor connections, cable-contact components and carrying provisions are included, optional or outside the scope of supply. Clear answers make the comparison more meaningful than a headline purchase figure. The fibre cable blowing machine price should also be considered alongside maintenance, replacement parts and the operational consequences of selecting an unsuitable configuration. A lower initial figure may not represent better value if essential accessories are missing or if the proposed equipment does not support the cable and duct combinations your crews regularly encounter. Conversely, buying capacity that your projects do not require can tie up budget without delivering a practical benefit. Describe typical jobs as well as unusual ones, and distinguish essential requirements from occasional preferences. Fibernet's background provides context for this technical discussion. Founded in 2001, the company draws on the experience of founder Giancarlo Trinei, whose work with early installations in Italy began in the 1980s. The business introduced its first cable blowing machine, Lady, in 2021. Its development reflects a practical engineering approach, while the involvement of the next generation supports the company's ambition to serve a global market. For buyers, that history is most useful when it leads to specific answers about the equipment being proposed, rather than replacing a careful compatibility assessment. American contractors evaluating a drill powered fiber optic cable blowing machine can discuss Italian-made products with assistance available in the United States and worldwide. Before purchasing, clarify the applicable support contact, the process for identifying replacement parts and the arrangements for troubleshooting or repair. Do not assume a particular response time, local stock position or warranty coverage unless it is confirmed in the quotation or supporting documents. For equipment intended to work in Italy, also request the documentation relevant to the supplied configuration and intended use. Keep the machine identification, operating instructions and purchase records accessible to the people responsible for site work and maintenance. A focused enquiry through www.fibernetsrlusa.com should describe the installation challenge and ask for a suitable configuration, commercial terms and support details. This gives Fibernet a concrete basis for its recommendation and gives your purchasing team a clearer basis for approval. The goal is an equipment decision that connects Italian manufacturing, practical site requirements and dependable communication throughout ownership.

Still looking for information about drill powered fibre cable blowing machine?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information