Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a drill powered fiber optic cable jetting machine starts with understanding the installation rather than comparing headline speed figures. For telecommunications contractors working along streets, between access chambers, or within constrained construction areas, the useful question is whether the equipment matches the cable, duct, and working conditions. A drill supplies mechanical drive, while the jetting process also depends on suitable compressed air and a prepared duct route. These functions should be evaluated together: a convenient drive arrangement cannot compensate for leaking connections, unsuitable seals, or excessive resistance inside the duct. Fibernet develops Italian-made cable jetting equipment and provides assistance in the United States and worldwide, connecting Italian manufacturing expertise with the practical needs of American installation companies. When discussing a drill driven fiber optic cable jetting machine, provide the cable outside diameter, duct inside and outside diameters, cable construction, intended route length, and available compressor details. Include information about bends, changes in elevation, intermediate access points, and any previous difficulty on the route. These details help establish which configuration deserves further technical assessment without assuming that every cable and duct combination will behave identically. Compatibility should include the drive interface, suitable drill characteristics, cable contact components, duct clamping arrangement, and sealing accessories. Ask which items are included with the proposed machine and which must be selected separately. A practical equipment discussion also addresses how the operator will position the machine, manage the cable feed, and monitor progress without creating unnecessary tension at the entry point. For a cable jetting machine for fiber optic cable installation, controlled feeding matters as much as portability. Excessive pushing force can damage a cable or cause buckling, particularly when resistance increases unexpectedly. Operators should follow the equipment instructions and the cable manufacturer's limits, stopping to investigate abnormal behavior instead of increasing force indiscriminately. Before requesting a quotation, prepare a short job profile covering typical cable sizes, common duct dimensions, daily transport arrangements, and the number of crews expected to share the equipment. American buyers can also identify whether documentation should show dimensions in inches alongside millimeters and pressure in psi alongside bar, reducing ambiguity during technical discussions. For projects in Italy, the same application information remains essential even when purchasing and site coordination involve different countries. The objective is a workable installation setup, not an unsupported promise of distance or speed. By presenting the actual operating conditions to Fibernet, contractors can request focused product guidance, clarify compatibility, and obtain a quotation that reflects the accessories and support their crews genuinely need.
Reliable cable jetting begins before the machine is attached to the duct. A crew should confirm that the intended route is continuous, correctly identified, and suitable for the planned installation method. Duct condition, connection quality, bends, and accumulated contamination can all influence progress. Carry out inspection, cleaning, and any duct integrity checks in accordance with the project specification and the relevant equipment instructions. Where lubricant is appropriate, use a product approved for the cable and duct materials, following the recommended application method rather than assuming that additional lubricant will resolve every source of resistance. A drill powered fiber optic cable jetting machine belongs within this prepared system: its performance depends on the complete installation arrangement, including air supply, cable handling, and operator control. Position the cable reel so that the cable feeds smoothly without dragging across sharp edges or entering the machine at an awkward angle. Provide sufficient working room for the operator and maintain clear access to the controls. Before applying pressure, verify that the duct connection and seals are correctly installed and suitable for the intended operating conditions. Follow the prescribed isolation and depressurization procedure before adjusting connections or removing components. Because a compressed air fiber optic cable jetting machine relies on airflow as well as mechanical feeding, compressor selection requires more than checking the maximum pressure printed on a label. Available flow, hose arrangement, connection restrictions, and air quality should be reviewed against the machine requirements and route conditions. Ask Fibernet to clarify these requirements for the specific equipment under consideration rather than transferring assumptions from a different machine. The drill itself also requires attention: confirm the permitted drive arrangement, operating mode, and any applicable speed or torque guidance in the manufacturer's documentation. During installation, monitor cable movement and respond to unexpected changes. A sudden reduction in progress may indicate increased friction, a sealing issue, an air supply problem, or a route obstruction; it does not automatically justify applying more drive force. Keeping a simple job record can improve subsequent decisions. Record the cable and duct dimensions, route characteristics, equipment configuration, relevant settings, stopping points, and observations made by the crew. These notes make technical support conversations more productive and help distinguish repeatable setup issues from isolated route conditions. When comparing a drill powered fiber optic cable blowing machine with another configuration, use the same documented application requirements so the comparison remains meaningful. Fibernet's Italian-made equipment and assistance in the United States and worldwide give buyers a basis for discussing these operational questions before purchase. The goal is to equip the crew with a compatible setup and a clear operating procedure, while recognizing that achievable results must always be assessed against the actual installation.
An equipment quotation becomes useful when the buyer can see precisely what it covers. For a drill powered fiber optic cable jetting machine, the purchase discussion should separate the machine from any application-specific accessories, drive equipment, compressor requirements, and consumable items. This prevents a low initial figure from obscuring the components needed to put the equipment to work. Ask for a written description of the proposed configuration, the compatible cable and duct ranges, the supplied accessories, and the documentation available to operators. Confirm delivery arrangements, warranty terms, and the process for requesting technical assistance rather than assuming that every supplier offers the same conditions. Fibernet was founded in 2001 and draws on the technical background of its founder, Giancarlo Trinei, whose experience with fiber installations in Italy dates to the early 1980s. The company introduced its first cable jetting machine, Lady, in 2021. These milestones provide context for its development as an Italian manufacturer, but a purchasing decision should still rest on the suitability of the equipment offered for the buyer's specific work. Fibernet combines made-in-Italy products with assistance in the United States and worldwide, an important consideration for American contractors coordinating equipment selection, field questions, and future maintenance. When researching fiber optic cable jetting machine price, compare equivalent packages rather than isolated machine listings. A meaningful comparison considers the accessories required for your usual cable sizes, the availability of replacement wear components, maintenance instructions, and the support arrangements associated with the purchase. Ask how to identify the machine and its configuration when seeking help, and which application details the technical team will need. Photographs of the setup, cable and duct specifications, compressor information, and a concise description of the issue can make troubleshooting discussions more focused. Buyers considering a used fiber optic cable jetting machine should apply the same compatibility checks while also examining condition, service history, completeness, and the availability of appropriate documentation. Wear or missing components may change the overall cost of making a machine suitable for work. Avoid assuming that a secondhand unit can safely accept an unfamiliar cable diameter or drive arrangement without verification. For companies operating several crews, standardizing suitable configurations can simplify accessory management and reduce confusion when equipment moves between sites. However, standardization should follow a review of actual installation needs rather than force every job into one setup. Before contacting Fibernet through its website, collect representative job details and identify the purchasing questions that matter most to your operation. This makes it easier to request a relevant quotation, discuss product suitability, and understand the assistance available throughout the equipment's working life.
Fill out the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.