Cable blowing machines · Made in Italy

Looking for "drill powered fiber optic cable blowing machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match your blowing machine to the cable, duct and job

Choosing a drill powered fiber optic cable blowing machine starts with the installation you need to complete, not simply the size of the equipment. Cable diameter, duct internal diameter, route condition and available compressed air all influence whether a proposed configuration suits the job. For contractors evaluating Fibernet equipment, the most useful first step is to share these details before requesting a recommendation. A clear description of the intended work helps establish which machine, accessories and operating requirements should be discussed, while avoiding assumptions about compatibility or achievable installation distances. Fibernet brings an Italian engineering background to this conversation, supported by a company history that began in 2001 and led to the introduction of its first cable blowing machine, Lady, in 2021. Understanding the operating principle also helps buyers ask better questions. In a drill driven fiber optic cable blowing machine, the drill provides mechanical drive, while compressed air supports cable movement through a suitable duct. Drill power should not be confused with a replacement for the air supply. Before selecting equipment, confirm the required drill characteristics, the approved connection arrangement and the compressor requirements for the specific model and application. These details should come from the manufacturer rather than from general assumptions about similar equipment. The relationship between cable and duct deserves particular attention. A cable that fits inside a duct is not automatically suitable for efficient blowing through that route. Internal clearance, cable stiffness, bends, joints and existing duct contamination can affect progress. Tell Fibernet whether the work involves a new duct or an existing route, and provide the cable manufacturer's handling limits where available. This gives the equipment discussion a practical foundation and helps identify questions that must be resolved before the machine reaches the site. For a contractor comparing a cable blowing machine for fiber optic cable installation, useful purchasing questions extend beyond the drive mechanism. Ask which cable and duct sizes the proposed configuration supports, which guides or seals are needed, and what preparation the manufacturer recommends. Also clarify the supply scope so that accessories, connections and consumable items are not left to assumption. Fibernet's made in Italy positioning connects the product to its engineering origins, while assistance in the United States and worldwide gives international buyers a channel for equipment enquiries. Specific support arrangements, availability and service procedures should be confirmed for the destination concerned. Bring your project information to Fibernet and request a configuration discussion based on actual site requirements. The aim is a well-informed equipment decision, with compatibility, preparation and operating expectations understood before installation begins.

Prepare the route and control the cable feed

A productive blowing operation begins before the cable enters the machine. The crew needs a prepared duct, a stable equipment position, a suitable air supply and a clear understanding of the operating instructions. A drill powered fiber optic cable blowing machine should be assessed as part of this complete working arrangement. Even a carefully selected machine cannot compensate for an obstructed duct, a poorly managed cable reel or unsuitable connections. Treat preparation as part of the installation process rather than as a task to rush through once the crew is ready to start. Begin by checking the route according to the project specification and the applicable duct testing procedures. Confirm that the intended duct is correctly identified, that its ends are accessible and that joints and closures are suitable for the planned operation. Duct continuity, cleanliness and integrity matter because restrictions or leakage can undermine cable movement. Where cleaning, proving or lubrication is required, follow the relevant manufacturers' instructions and use only products approved for the cable, duct and equipment. Do not infer working pressure or airflow requirements from the machine's appearance or from a previous job. Cable handling is equally important. Position the reel so that cable can feed smoothly without unnecessary dragging, twisting or sharp changes of direction. Maintain the cable manufacturer's minimum bend radius and avoid arrangements that introduce avoidable resistance before the cable reaches the drive. Verify that the selected guides, seals and gripping components match the intended cable and duct dimensions. Adjustments should follow the machine documentation, because excessive contact pressure can damage the cable, while inadequate engagement can prevent controlled feeding. The objective is steady movement within the limits of every component involved. When evaluating a compressed air fiber optic cable blowing machine, distinguish between the compressor's stated capabilities and the air actually available at the equipment. Hose dimensions, connection restrictions and leakage can affect delivery. Ask for the required supply conditions for the proposed application, and confirm that hoses, fittings and pressure controls are appropriately rated. A drill powered fiber cable blowing machine also requires attention to the drill setup, including its approved operating mode and the manufacturer's instructions for mounting and control. Site personnel should understand how to stop the operation and safely release pressure before adjustments or disconnection. During installation, monitor progress rather than relying on an assumed distance or speed. Unexpected resistance, irregular feeding or a change in operating behaviour warrants a controlled stop and investigation. Record the route details, cable type, setup and observations so that later work can benefit from a documented starting point. Fibernet can be contacted to discuss equipment requirements and preparation questions, with project-specific guidance sought before making changes that could affect safety or cable integrity.

Evaluate ownership costs and assistance before ordering

The purchase decision for a drill powered fiber optic cable blowing machine should account for more than the initial quotation. Contractors need to understand what is included, what must be supplied separately and how the equipment will be maintained between jobs. A useful enquiry therefore describes both the immediate installation and the expected pattern of future work. Will the same crew use the machine regularly, or will it move between teams? Are cable and duct dimensions consistent, or will different configurations be needed? These questions help frame a quotation around practical ownership rather than an isolated purchase price. When comparing fiber optic cable blowing machine price information, request a clear description of the proposed package. Confirm the machine configuration, supplied accessories, compatible dimensional ranges and any separately required drill, compressor, hoses or fittings. Ask about packaging, delivery terms and the documentation supplied with the equipment. For cross-border purchases, establish responsibility for transport, customs formalities and applicable charges before committing to an order. A price comparison is meaningful only when the scope is understood; two offers can look similar while requiring different additional purchases before either machine can be used on site. Maintenance and replacement items deserve the same attention. Ask which components require routine inspection, how cleaning should be performed and what storage conditions are recommended. Clarify how to identify and order replacement parts for the exact machine configuration. Keeping the correct product identification and operating documentation accessible can make technical enquiries more precise. Contractors should also establish who within their organisation is responsible for checking equipment after use, recording issues and arranging service when needed. These simple ownership practices help prevent a minor unresolved problem from becoming a disruption on the next installation. A used fiber optic cable blowing machine introduces additional questions about condition and completeness. Before comparing it with new equipment, investigate its maintenance history, the state of cable-contact components, available accessories and the presence of original instructions. Verify whether the configuration suits the intended work and whether replacement parts and assistance remain available. An attractive purchase price does not establish that a machine is ready for the next project. Any inspection or operating test should follow appropriate safety procedures and, where necessary, involve a suitably qualified technician. Fibernet's background offers another dimension to the discussion. Founded in 2001 by Giancarlo Trinei, the company developed from technical experience in Italy and later welcomed the next generation into the business. Its cable blowing equipment reflects a made in Italy identity, with assistance in the United States and worldwide. Buyers should contact Fibernet to confirm current product specifications, support channels, warranty terms and service arrangements for their location. This creates a clearer basis for selecting equipment and planning its working life.

Still looking for information about drill powered fiber optic cable blowing machine?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information