Cable blowing machines · Made in Italy

Looking for "drill powered fiber optic cable blower"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match your cable blowing equipment to actual jobsite conditions

Choosing a drill powered fiber optic cable blower starts with understanding the installation rather than assuming that one machine will suit every cable and duct combination. Contractors need equipment that matches the cable diameter, duct dimensions, route geometry, and working conditions they encounter on site. For American installation companies evaluating Italian manufacturing expertise, Fibernet offers a relevant starting point: a business founded in Italy in 2001, with a technical background that predates its establishment. Its founder, Giancarlo Trinei, worked on early fiber installations in Italy during the 1980s. That practical heritage informs a company focused on developing equipment that addresses the challenges faced by installation professionals. Before requesting a recommendation, prepare the actual outside diameter of the cable, the duct outside diameter and wall thickness, the intended route length, and any available information about bends or changes in elevation. These details help establish whether a proposed configuration is appropriate. A cable blower for fiber optic cable installation should be assessed as part of a complete operating setup, not as an isolated purchase. The drill supplies mechanical drive in a compatible arrangement, while compressed air supports cable movement through the duct. Neither element removes the need to check cable handling limits or prepare the route correctly. Ask which drill characteristics are required, whether the proposed drill is approved for the selected machine, and which operating restrictions apply. Drill speed, torque behavior, and control characteristics can affect handling, so compatibility should never be inferred merely because an attachment appears to fit. Equally important is the relationship between the cable and the duct. Limited clearance, excessive friction, contamination, or unsuitable seals can undermine an otherwise well planned installation. Crews should establish a preparation procedure covering duct inspection, approved cleaning methods, appropriate lubrication where specified, and confirmation that the receiving end is ready. The compressor also needs evaluation: available pressure alone does not establish that sufficient airflow will reach the machine under operating conditions. Hose length, connection restrictions, and air preparation requirements all deserve attention. When comparing a compressed air fiber optic cable blower configuration, request the relevant technical documentation and assess the complete system against the intended task. Fibernet can be contacted through its website to discuss equipment selection, Italian manufacturing, and assistance for customers in the United States and worldwide. Providing real installation data makes that conversation more productive and helps distinguish a suitable equipment proposal from a generic recommendation. The objective is a controlled, repeatable installation process with clearly understood limits, rather than an unsupported promise about distance or speed.

Build a controlled cable blowing procedure around the crew

A productive installation depends on the way the crew prepares, operates, and checks its equipment throughout the working day. With a drill powered fiber optic cable blower, the machine operator must be able to manage feeding behavior while communicating clearly with colleagues handling the cable supply and monitoring the receiving end. Begin with a defined work area that provides stable equipment positioning, access to controls, and sufficient room for the cable to approach the feed mechanism without sharp bends. Protect the cable from abrasive surfaces and arrange the payout so that it does not introduce unnecessary resistance. These practical details matter because additional drag at the entry point can be mistaken for resistance farther along the duct. Before admitting compressed air, check the assembly against the manufacturer's instructions. Confirm that the correct cable guides, duct connections, and seals are installed, and inspect components for visible wear or contamination. Connections must be secured using the specified procedure, and personnel should remain clear of potential movement at the duct outlet. Pressure limits, isolation steps, and personal protective equipment should follow the machine documentation and the site's safety assessment. Never loosen a pressurized connection or improvise a repair while the system is operating. Once the setup is ready, use the approved starting procedure and observe how the cable responds rather than immediately pursuing maximum output. Unexpected slip, buckling near the entry, irregular payout, or a sudden change in progress should prompt a controlled stop and investigation. Increasing drive force without identifying the cause can expose the cable to avoidable stress. Record the conditions associated with successful sections, including the equipment configuration, cable and duct sizes, route characteristics, and relevant operating settings. This creates a useful reference for comparable work without treating previous results as a guarantee. Contractors considering a drill driven fiber optic cable blower should also clarify how adjustments are made and which checks operators can perform between installations. Clear instructions reduce reliance on guesswork when different crew members use the same equipment. If a cordless drill is part of the approved configuration, plan battery availability around the expected workload and the drill manufacturer's requirements. However, do not assume that a battery powered fiber optic cable blower operates without a compressor: electrical drive and pneumatic assistance serve different functions, and the exact arrangement must be confirmed for the model under consideration. End each work period with the specified cleaning, inspection, and storage routine. Keep seals and compatible accessories organized so that the next setup begins with known components rather than improvised substitutions. For teams sourcing Italian equipment for American jobsites, discussing these operational questions with Fibernet helps connect product selection with the realities of crew organization, repeatable preparation, and ongoing technical assistance.

Evaluate Italian manufacturing, ownership costs, and technical assistance

The purchase decision should extend beyond the initial quotation. A drill powered fiber optic cable blower becomes part of a contractor's working equipment, so its suitability depends on documentation, available configurations, service arrangements, and the practical cost of keeping it ready for use. Ask for a proposal that identifies the machine, included accessories, required external equipment, and any optional components needed for your cable and duct sizes. This makes comparisons more meaningful and reduces the risk of discovering essential omissions after delivery. When reviewing fiber optic cable blower price information, distinguish the machine cost from the cost of a usable installation setup. A compatible drill, compressor, air hoses, approved connections, replacement seals, transport arrangements, and routine maintenance may all influence the overall budget. Their inclusion varies, so each item should be confirmed rather than assumed. Request current commercial terms directly, including delivery arrangements for your destination, applicable warranty conditions, and the process for obtaining technical assistance. For customers working in the United States, clarify how support is coordinated across time zones, which information is needed to open a service request, and how replacement parts are supplied. Fibernet combines Italian origins with assistance for customers in the United States and worldwide; the precise scope and timing of that assistance should be established for the equipment and location involved. Its development history also provides context for buyers assessing the company behind the product. Founded in 2001, Fibernet began a generational transition in 2010 when Matteo, Marta, and Ismael joined the business. In 2021, the company launched its first cable blowing machine, Lady. These milestones describe a manufacturer building on practical technical experience while developing its own equipment range. They do not replace the need to verify the specifications of the particular machine being proposed. Buyers comparing a used fiber optic cable blower with a new unit should apply the same discipline. Check the equipment's identity, service history, visible condition, completeness, and compatibility with currently available accessories. An apparently lower purchase cost may be offset by missing components, uncertain maintenance, or difficulty establishing safe operating condition. For either purchasing route, request the documentation needed by the people who will operate and maintain the machine. A useful inquiry to Fibernet includes your cable dimensions, duct specifications, typical route conditions, existing drill and compressor details, and the country where the equipment will be used. Explain whether you need a single setup or a consistent configuration for several crews. That information supports a more focused discussion about made in Italy equipment, operational requirements, and assistance after purchase. The goal is to obtain a clearly specified solution whose requirements are understood before it reaches the jobsite.

Still looking for information about drill powered fiber optic cable blower?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information