Cable blowing machines · Made in Italy

Looking for "drill powered fiber cable blowing machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around the installation, not assumptions

A drill powered fiber cable blowing machine should be selected around the cable, duct, and working conditions your crew actually encounters. For contractors evaluating Italian-made equipment, the useful starting point is not a headline installation distance but a clear description of the intended job. Cable outside diameter, duct internal diameter, cable jacket characteristics, route length, and the number of bends all influence how an installation behaves. Fibernet gives buyers a manufacturer to approach with these practical questions, drawing on a business established in Italy in 2001 and a cable blowing product development journey that included the launch of Lady in 2021. Before choosing a configuration, provide the relevant cable and duct specifications and ask which machine, accessories, and operating limits match that combination. This avoids treating different cables as interchangeable simply because their nominal diameters appear similar. A drill driven fiber cable blowing machine uses mechanical feeding alongside the assistance of compressed air, so the drill is only one element of the complete working arrangement. The compressor, air treatment, duct connections, cable guidance, and sealing components also need to suit the application. Ask for the required air supply specifications rather than assuming that an available compressor will be adequate. Likewise, confirm the accepted drill interface, suitable operating settings, and any restrictions stated by the manufacturer before putting equipment to work. Preparation on site deserves the same attention as equipment selection. The duct should be checked for continuity, cleanliness, and suitability for the planned blowing operation, using procedures approved for the infrastructure involved. Damaged duct sections, poorly assembled connections, or excessive leakage can undermine progress regardless of the machine selected. Cable payout also matters: position the reel to support a smooth approach, respect the cable manufacturer's bending limits, and prevent avoidable resistance before the cable reaches the feeding mechanism. When evaluating a cable blowing machine for fiber optic cable installation, consider how easily the operator can observe feeding behavior and respond when conditions change. A sensible operating plan includes communication between crew members, clear stopping criteria, and a method for recording the conditions associated with each run. No supplier can responsibly promise the same distance or speed for every route without understanding these variables. For projects in Italy, and for American installation businesses considering equipment made in Italy, the most valuable purchasing conversation is therefore specific and technical. Share representative job details with Fibernet and request confirmation of compatibility, included components, and the support arrangements available for the proposed configuration. That approach turns an equipment inquiry into a practical assessment of how the machine will fit your installation work.

Build a workable site setup before the first cable run

An effective cable blowing operation begins before the feeding mechanism turns. Imagine a contractor preparing several duct sections along a street: access points are limited, the compressor must sit in a safe position, and the cable reel needs enough space for controlled payout. In that setting, a drill powered fiber cable blowing machine is part of a coordinated installation setup rather than a standalone answer to every obstacle. First establish where each component will sit and how the crew will keep hoses, cables, and moving parts away from pedestrian routes and other site activities. Follow the applicable site safety requirements and the equipment instructions, including any requirements for protective equipment, pressure isolation, and safe access to rotating components. Before connecting compressed air, inspect the relevant hoses, fittings, and duct interfaces, and verify that their ratings suit the intended operating conditions. Any adjustment that exposes moving parts or pressurized connections should follow the manufacturer's isolation procedure. These checks are particularly important when equipment moves between crews or arrives at a job with a different combination of accessories. If your intended setup is described as a battery powered fiber cable blowing machine because the drive comes from a cordless drill, clarify exactly what the battery powers. A battery-operated drive does not automatically remove the requirement for an appropriate compressed air supply, and buyers should not mistake cordless feeding for a completely self-contained installation system. Confirm drill compatibility, battery planning, and the availability of the air supply separately. During operation, a steady, controlled approach is more useful than chasing a nominal maximum speed. Watch for changes in cable movement, unusual resistance, slipping, or other behavior identified in the operating instructions. If progress deteriorates, stop and investigate according to the approved procedure rather than increasing force without understanding the cause. The cable's permitted installation load and bending limits remain essential boundaries throughout the work. A drill powered fiber optic cable jetting machine should be assessed with these practical controls in mind, including the adjustments and monitoring features actually provided by the proposed model. Ask Fibernet to explain those features rather than assuming that every machine has the same controls or protective functions. After a run, record the cable and duct combination, approximate route characteristics, air supply setup, and any interruptions. This information helps teams compare similar installations and gives technical support a clearer picture if troubleshooting becomes necessary. Between jobs, follow the specified cleaning, inspection, and storage procedures, paying attention to components subject to wear and any seals or guides identified in the documentation. For contractors operating in Italy or coordinating American crews, this disciplined preparation supports a more predictable workflow without relying on unsupported promises about installation distance, speed, or universal equipment compatibility.

Assess Italian manufacturing, support, and the complete purchase scope

Buying installation equipment is also a decision about the manufacturer behind it. Fibernet was founded in 2001 by Giancarlo Trinei, whose technical background reaches back to work on early Italian fiber installations in the 1980s. The family business began a generational transition in 2010, welcoming Matteo, Marta, and Ismael, and later introduced its first cable blowing machine, Lady, in 2021. For a buyer considering a drill powered fiber cable blowing machine, this history provides context for the company's development, but the purchase should still rest on documented suitability for the intended application. Ask how the proposed equipment addresses your cable sizes, duct arrangements, site conditions, and maintenance expectations. Italian manufacturing is relevant to the product's origin; it should be accompanied by clear information about the configuration being supplied and how assistance will be accessed throughout ownership. Fibernet presents its equipment as made in Italy, with assistance in the United States and worldwide. Before placing an order, establish the support process that applies to your location, including contact channels, working hours, information needed for troubleshooting, and the arrangements for parts or equipment requiring inspection. Do not assume that worldwide assistance means identical response times or local repair facilities in every market. For projects in Italy, confirm the relevant delivery and service arrangements directly; for American contractors purchasing Italian-made equipment, also clarify shipping responsibilities and any documentation required for the transaction. A useful discussion of fiber cable blowing machine price should go beyond the cost of the main unit. Request an itemized quotation that identifies the supplied accessories, compatible cable and duct components, optional items, delivery charges, and applicable commercial terms. Establish whether the drill, compressor, hoses, and any required air treatment equipment are included or must be sourced separately. This makes competing configurations easier to assess without mistaking an incomplete package for a lower overall investment. The same care applies when comparing a drill powered fiber optic cable blowing machine with another proposed setup: compare verified capabilities and the complete working arrangement, not just similar product names. Ask which routine checks the operator can perform, which components may require replacement with use, and what maintenance documentation accompanies the equipment. Keep purchase records, configuration details, and equipment identification accessible so future support requests can be handled with accurate information. If your business works across multiple sites, consider how consistently crews can assemble, inspect, and maintain the selected configuration. Standardizing the information provided to operators may be as important as standardizing the machine itself. Fibernet's website offers a starting point for discussing these requirements and requesting product information. A well-prepared inquiry should explain the intended work, identify the available supporting equipment, and ask for a recommendation grounded in confirmed technical compatibility rather than broad performance claims.

Still looking for information about drill powered fiber cable blowing machine?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information