Cable blowing machines · Made in Italy

Looking for "drill powered fiber cable blower"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose a cable blower around the work your crew actually performs

Choosing a drill powered fiber cable blower starts with the cable, duct, and working conditions your installation crew encounters, not with an isolated speed claim. Telecommunications contractors need equipment that fits the intended cable diameter, duct dimensions, route characteristics, and available compressed air supply. These factors work together: a machine cannot compensate for an obstructed duct, an unsuitable cable and duct combination, or an air supply that fails to meet its requirements. Before selecting equipment, prepare the cable manufacturer’s installation limits, the duct specifications, and a realistic description of the route. This gives Fibernet a practical basis for discussing an appropriate configuration rather than recommending equipment from incomplete information. For crews comparing a drill driven fiber cable blower with other drive arrangements, understanding the complete setup is particularly important. The drill provides the mechanical drive in this equipment category, while compressed air assists cable movement through the duct. A cordless drill does not remove the need to verify the air requirements. Ask which drill characteristics, interfaces, and operating settings the proposed machine requires, and confirm whether the drill and compressor are included or supplied separately. Equally important is the way the equipment guides and grips the cable. Contact pressure must be appropriate for the cable construction, and the cable manufacturer’s limits must remain central to the installation plan. Excessive pushing force is not a substitute for investigating unexpected resistance. Discuss the available adjustment methods, compatible guides and seals, and recommended inspection points before committing to a purchase. A cable blower for fiber optic cable installation should also suit the practical realities of your work area. Consider how the crew will position the machine near the duct entrance, manage the cable supply, connect the air line, and maintain access to the controls. Stable positioning and orderly cable handling help operators recognize problems before they become expensive interruptions. For American contractors evaluating Italian-made equipment, Fibernet offers a direct starting point for these product conversations, with assistance in the United States and worldwide. The company was founded in Italy in 2001 and introduced its first cable blowing machine, Lady, in 2021. That background gives buyers a clear company history to consider alongside the technical assessment. Contact Fibernet with your installation details and request confirmation of the proposed machine’s compatibility, supplied accessories, and operating requirements. A useful equipment discussion should leave your purchasing team and field crew with the same understanding of what the configuration can support, what additional equipment is needed, and which site conditions must be checked before blowing begins. This approach makes the quotation more meaningful and reduces avoidable surprises when the equipment reaches the jobsite.

Prepare the duct, air supply, and operating sequence before blowing

A productive blowing operation depends on preparation as much as on the machine itself. Before bringing a drill powered fiber cable blower into service, establish whether the installed duct is continuous, correctly connected, and suitable for the planned cable. Follow the applicable project procedures for checking duct condition, identifying leakage, and removing water or debris. A route that appears straightforward on a drawing may include bends, elevation changes, or connection points that affect cable movement. Recording these details helps the crew plan the operation and gives technical support useful information if progress becomes difficult. Compressed air deserves the same attention as the drive arrangement. Pressure and flow are different requirements, and both must be checked against the selected machine’s documentation. Hose dimensions, connections, and air treatment can influence the supply reaching the equipment. Do not assume that a compressor is suitable solely because its maximum pressure appears sufficient. Ask Fibernet which supply conditions apply to the proposed configuration and how those conditions should be verified at the working position. Before starting, inspect the machine according to its instructions and confirm that the installed guides, seals, and cable contact components match the application. Check the cable supply arrangement as well: the cable should feed without unnecessary drag, uncontrolled loops, or bends tighter than the cable manufacturer permits. The operator needs a stable position with access to the controls, while other crew members need clear responsibilities and a reliable way to communicate. When assessing a drill powered fiber optic cable blowing machine, ask how the manufacturer recommends establishing initial settings and responding to changes in resistance. A controlled start allows the crew to observe feeding behavior before increasing the operating rate within the documented limits. If movement becomes irregular or stops, follow the prescribed stopping and depressurization procedure before investigating. Increasing force without understanding the cause can expose the cable and equipment to unnecessary stress. Appropriate protective equipment and safe handling of compressed air remain essential throughout the operation. Keep records of the cable and duct combination, route conditions, equipment configuration, and any interruptions. These details make later troubleshooting more precise and help estimate comparable work without treating a previous result as a guaranteed distance. Contractors considering a battery powered fiber cable blower should apply the same planning discipline: confirm what the battery powers and what external air supply remains necessary. Fibernet’s Italian-made equipment and assistance in the United States and worldwide provide a basis for discussing these practical requirements. Request the relevant operating documentation and application guidance before mobilization, so your team can prepare the complete system rather than discovering missing requirements at the duct entrance.

Evaluate the quotation, support, and long-term operating costs

The purchase price of a drill powered fiber cable blower is only one part of the investment. A useful quotation should identify the exact machine configuration, the cable and duct sizes it is intended to accommodate, the accessories included, and any additional items required for your application. Without that detail, two offers may appear comparable while covering different working capabilities. Ask whether the proposed package includes the relevant guides, seals, connection components, and transport provisions, and establish which items must be ordered separately. If your crews work with several cable and duct combinations, discuss the changes needed between applications rather than assuming one setup covers every job. When researching fiber cable blower price, connect the commercial discussion to expected usage. Consider how often the machine will be deployed, how many crews may share it, and how equipment availability affects your installation schedule. Consumable parts, inspection requirements, cleaning procedures, and replacement component availability all influence ownership costs. Request the maintenance guidance for the proposed model and ask which parts deserve routine attention. Clear answers help your team plan care of the equipment without inventing service intervals or relying on general assumptions. Support arrangements matter particularly when equipment is purchased across borders. Fibernet produces equipment made in Italy and provides assistance in the United States and worldwide. Before ordering, clarify the appropriate contact channel for your location, the information needed for technical enquiries, and the process for obtaining replacement parts or arranging service. Confirm warranty terms, shipping responsibilities, delivery estimates, and any applicable commercial conditions in writing. This is more useful than assuming that every support request follows the same timetable or procedure. The company’s identity also provides context for a purchasing decision. Founded in 2001, Fibernet grew from Giancarlo Trinei’s technical experience, which began with early fiber installations in Italy during the 1980s. The family business began its generational transition in 2010 with Matteo, Marta, and Ismael joining the company, and launched Lady in 2021. For buyers, that history is relevant as background, while the final selection should still depend on documented suitability for the intended work. If you are comparing a drill powered cable blower with another configuration, ask both suppliers equivalent questions about compatibility, required external equipment, maintenance, and support. Provide Fibernet with your cable specifications, duct dimensions, likely route conditions, and purchasing location to support a focused quotation. For projects connected with the Italian market or procurement by American contractors, confirm the applicable documentation and delivery arrangements for the actual destination. The strongest buying decision is one your procurement team can explain commercially and your installation crew can use confidently, with clearly defined requirements rather than unsupported performance promises.

Still looking for information about drill powered fiber cable blower?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information