Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Selecting a drill powered cable blowing machine starts with understanding the cable and duct combination your crew will actually use. Cable outside diameter, duct internal diameter, cable construction, route length, and the number of bends all influence whether an installation can proceed smoothly. A machine should therefore be evaluated as part of a complete blowing setup rather than as an isolated purchase. For contractors working on installations in Italy, this means bringing actual project specifications to the equipment discussion, including metric dimensions and any measurements supplied by international project partners. Fibernet can be contacted to discuss the intended application and establish which equipment details need confirmation before selection. A drill powered fiber cable blowing machine uses a compatible drill to provide mechanical drive, while compressed air assists cable movement through the duct. The drill does not replace the compressor, and choosing a compact drive arrangement does not remove the need to evaluate airflow, pressure, and duct condition. Buyers should ask about the permitted drill configuration, operating limits, cable gripping arrangement, and components needed for their cable sizes. These details matter because excessive feed force, unsuitable contact pressure, or an incorrect setup can damage the cable jacket or interrupt progress. Before work begins, the installation team should inspect the route, confirm duct continuity, and check that connections and seals are appropriate for the planned operating conditions. Cable drums also need positioning that allows controlled payout without sharp changes in direction. A well-organized entry area helps prevent avoidable resistance before the cable reaches the machine. Where several duct sections are involved, clear identification and coordination between entry and receiving locations reduce confusion during the operation. When comparing a drill driven cable blowing machine with another configuration, focus on practical handling rather than headline claims alone. Consider how operators load the cable, change compatible components, secure the equipment, and monitor feeding during an installation. Ask which accessories are included, which are optional, and which specifications must be matched to your compressor. No responsible equipment assessment can promise a fixed installation distance without knowing the route and operating conditions. Useful purchasing conversations instead establish a realistic application range and identify the factors that could limit progress. Fibernet's Italian manufacturing identity provides the background for a product discussion centered on the work itself, with assistance available in the United States and worldwide. Share your cable data, duct dimensions, and expected site conditions to request guidance relevant to the setup you are considering. That approach gives purchasing teams a clearer basis for comparison and helps crews prepare an installation plan grounded in confirmed compatibility rather than assumptions.
A productive cable blowing operation depends on the preparation surrounding the machine as much as the drive mechanism itself. Before positioning a drill powered cable blowing machine, the crew should establish a stable working area, arrange the cable drum for free movement, and identify the route the cable will follow into the feed assembly. Avoiding unnecessary bends at the entry point helps keep the initial feed predictable. The equipment must be secured and operated according to its documentation, with personnel kept clear of moving parts and pressurized connections. Appropriate protective equipment and a coordinated stopping procedure belong in the job plan from the outset. Compressed air deserves particular attention. Available compressor pressure alone does not describe whether the setup is suitable, because airflow capacity, hose configuration, fittings, and leaks also affect performance. Operators should confirm the machine's documented air requirements and the pressure ratings of every connected component. Duct preparation must follow applicable project procedures, and any cleaning or proving operation should be completed before cable feeding begins. Where lubrication is appropriate, its compatibility with the cable jacket, duct material, and equipment should be verified rather than assumed. A drill powered fibre optic cable blowing machine also requires a suitable relationship between drill operation and cable feed. The correct settings depend on the equipment instructions and application; higher drill speed is not automatically a better choice. A controlled start allows the operator to observe how the cable enters the duct and whether payout remains smooth. If resistance rises or movement becomes irregular, continuing to increase drive force can make the situation worse. The safer response is to stop according to the operating procedure, investigate the cause, and resume only when the issue has been addressed. Keep communication simple and explicit when personnel are positioned at different points along the route. Everyone involved should know who controls the equipment, who monitors the receiving end, and how an immediate stop will be communicated. Recording the cable type, duct dimensions, route conditions, and setup choices can also improve consistency when the crew moves to the next section. These records help distinguish an equipment adjustment issue from resistance caused by a particular route. Teams considering a battery powered cable blowing machine should clarify what the description means for the proposed configuration. A cordless drill may supply the mechanical drive, but compressed air can still be required, so the entire installation is not necessarily independent of external equipment. Fibernet can be contacted to discuss the relevant operating arrangement and identify the specifications that need checking. For installations in Italy or projects coordinated with American contractors, confirming these practical details before dispatch helps avoid arriving on site with an incomplete or unsuitable blowing setup.
Equipment purchasing becomes more useful when the supplier conversation connects product selection with the way a contractor actually works. Fibernet was founded in 2001, building on the technical experience of Giancarlo Trinei, whose work with early optical cable installations in Italy dates back to the 1980s. The company introduced its first cable blowing machine, Lady, in 2021. This background gives buyers a clear point of reference when discussing Italian-made cable blowing equipment, without replacing the need to verify the specifications of the particular configuration under consideration. For a contractor evaluating a drill powered cable blowing machine, the practical question remains straightforward: will the proposed setup suit the cables, ducts, and operating conditions on the project? A useful inquiry includes more than a request for a price. Provide cable diameter and construction details, duct dimensions, typical section lengths, anticipated bends, and information about the compressor already available. Explain whether the equipment will move frequently between access points or remain at one location for extended operations. If several crews will share the machine, ask how compatible size changes are handled and what documentation is supplied for setup and routine care. These questions help define the scope of the purchase before commercial decisions are made. When reviewing a drill powered optical fibre cable blowing machine, purchasing teams should also establish what accompanies the equipment. Request clarification on the supplied components, any application-specific accessories, replacement wear items, and the maintenance tasks described in the documentation. Confirm the procedure for obtaining technical assistance and ask what information support personnel will need if an operating issue occurs. Photos of the setup, cable and duct measurements, and a precise description of the symptoms can make an initial technical discussion more useful than a general report that the cable will not advance. Fibernet combines its made-in-Italy product identity with assistance in the United States and worldwide. For American businesses coordinating installations with Italian operations, that international support context can be relevant when planning equipment ownership across locations. Buyers should still confirm service arrangements, parts availability, delivery details, and any applicable commercial conditions directly for their destination. A cable blowing machine for fiber optic cable installation should be assessed through both its technical fit and the support arrangements behind it. Neither country of manufacture nor a compact format alone establishes suitability for every route. The strongest purchasing decision brings together verified compatibility, a complete air and drive setup, clear operating documentation, and an understood path for assistance. Contact Fibernet with the requirements of your next installation to discuss those points and request a quotation based on the equipment and accessories your application actually needs.
Fill out the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.