Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
A drill powered cable blower should be selected around the cable, duct, and working conditions your crew will actually encounter, rather than a headline installation distance. For contractors working on projects in Italy, that means understanding the route before deciding which equipment configuration to request. Cable outside diameter, duct internal diameter, route length, bends, elevation changes, and duct condition all affect the installation process. Even two routes of equal length can behave differently when one has tight bends or poorly sealed connections. Fibernet gives prospective customers a technical starting point for discussing these variables and identifying the information needed for an equipment assessment. The objective is straightforward: match the blowing machine to the application without assuming that one setup will suit every cable and duct combination. In a typical drill driven cable blower arrangement, the drill supplies mechanical drive while a suitable compressed air system supports cable movement through the duct. A cordless drill therefore does not automatically make the complete installation independent of external equipment. Buyers should establish the required compressor characteristics, air preparation requirements, connection details, and compatible drive arrangement before planning site logistics. They should also confirm the available cable guides, duct adapters, sealing components, and adjustment procedures for the proposed machine. These details matter because the cable must be guided consistently without applying inappropriate pressure to its jacket. For a purchasing discussion, prepare the cable manufacturer's handling limits, the duct specifications, and a practical description of the intended route. Include expected working space around the access point and whether the crew needs to relocate the equipment frequently. A drill powered fiber cable blower may be considered for its drive arrangement, but suitability still depends on the documented operating envelope of the specific model. Ask how feed speed is controlled, how an operator recognizes abnormal resistance, and what actions the manufacturer recommends when progress changes unexpectedly. Avoid treating higher pressure or greater drive force as automatic solutions to a difficult route. A disciplined approach starts with compatibility checks and continues with controlled operation within the stated limits. Fibernet was founded in 2001 and introduced its first cable blowing machine, Lady, in 2021. That background provides context for a product conversation grounded in practical installation requirements. When contacting the team, explain whether your priority is access, repeatable setup, movement between work areas, or compatibility with an existing compressor. Request confirmation of the current product configuration rather than relying on assumptions about accessories or performance. This makes the inquiry more useful and helps your purchasing team compare complete working setups instead of isolated machine descriptions.
Reliable cable blowing begins before the drive turns. The route needs to be assessed, the duct checked using appropriate procedures, and the cable prepared according to its manufacturer's instructions. Where permitted by the relevant equipment and duct specifications, crews should verify duct continuity, cleanliness, and sealing before attempting installation. Water, debris, unsuitable connectors, or damaged sections can undermine an otherwise appropriate machine setup. The launch area also deserves attention: the cable reel should be positioned so the cable can pay off smoothly, with its minimum bend radius respected throughout the approach to the machine. Poor alignment at the entry point can create unnecessary resistance before the cable has even entered the duct. A cable blower for fiber optic cable installation works as part of this coordinated arrangement, not as a substitute for route preparation. Before starting, the operator should check that the selected guides and seals match the intended cable and duct sizes. Confirm the drill attachment and drive settings against the machine instructions, and establish how the drive and compressed air will be stopped safely. Follow the manufacturer's isolation procedure before opening the machine, changing components, or addressing a blockage. Compressed air introduces stored energy, so pressure must be released as directed before connections are disturbed. Site procedures should also address eye protection, communication between workers, and control of the receiving area. During operation, the relationship between feed speed, airflow, and route resistance requires attention. A drill powered cable blower should not be pushed harder simply because progress slows. Unexpected changes can indicate an obstruction, excessive friction, an unsuitable setup, or a route condition that needs investigation. Operators should follow documented limits and stop criteria rather than attempt to overcome every interruption through additional force. Recording the circumstances of a stoppage can be valuable: note the installed distance, observed behavior, equipment settings, and any relevant route features. These observations support a more productive technical discussion than a general report that the cable would not advance. When evaluating a drill powered fiber optic cable blower, ask which operating observations should be monitored and which routine checks are required between runs. Also establish the inspection and replacement criteria for seals, guides, and other wear components supplied with the selected configuration. A consistent maintenance routine helps crews recognize deterioration before it affects an installation. For teams moving between Italian project sites, a documented setup checklist can support consistency even when access conditions change. Keep the checklist specific to the approved machine, cable, duct, and air supply combination. Fibernet can be contacted with these application details to discuss product suitability and the documentation available for the proposed equipment. The aim is controlled, repeatable work supported by clear operating information, not an unsupported promise of identical results on every route.
Choosing a cable blowing machine is also a decision about the information and assistance available after purchase. Contractors need to understand what is supplied, which components are application dependent, and how to obtain help when an unfamiliar installation condition appears. Fibernet brings an Italian manufacturing background to that discussion, with assistance in the United States and worldwide. For customers evaluating equipment for work in Italy, the useful next step is to confirm the support arrangements applicable to their location, including contact channels, documentation language, replacement part ordering, and any service procedures relevant to the selected machine. International availability of assistance should not be confused with a guaranteed response time or immediate local stock; those details should be established directly before purchase. The company's history helps explain its practical approach to product development. Founder Giancarlo Trinei began working with early optical cable installations in Italy during the 1980s, building technical experience that later informed the creation of Fibernet in 2001. A generational transition began in 2010 with Matteo, Marta, and Ismael joining the business, while the introduction of Lady in 2021 marked the company's entry into cable blowing machines. For a buyer considering a drill powered cable blower, this history is relevant when it leads to specific questions about design choices, maintenance access, operating documentation, and configuration support. It is not a substitute for verifying the suitability of the exact product being quoted. A useful quotation request should describe more than the desired machine category. Include your cable and duct dimensions, intended route characteristics, available air supply, expected frequency of use, and any transport or access restrictions. Ask for a clear breakdown of the machine, compatible accessories, necessary consumables, and items the contractor must provide separately. If your purchasing team uses the term drill powered fibre cable blower, clarify that the request concerns the drive method as well as the cable installation application. Similar descriptions do not establish identical operating limits or supplied equipment. The same care applies when comparing a drill driven fibre cable blower with another configuration: evaluate the complete installation requirements rather than the terminology alone. Ownership costs also extend beyond the initial price. Consider replacement wear components, inspection routines, drill compatibility, compressor requirements, and the practical steps involved in preparing the machine for another cable size. Ask which tasks operators may perform and which require assistance. For organizations managing several crews, retaining the relevant manuals and configuration records helps maintain a common reference when equipment moves between sites. Explore the Fibernet product information and contact the team with a concise application brief. A focused conversation can establish what documentation, configuration options, and support arrangements are available, allowing your team to make a purchasing decision based on confirmed requirements rather than generalized performance claims.
Fill out the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.