Cable blowing machines · Made in Italy

Looking for "drill driven optical fibre cable blowing machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match your cable blowing equipment to the work ahead

Choosing a drill driven optical fibre cable blowing machine starts with understanding the installation, rather than selecting equipment on appearance or a headline distance claim. For contractors preparing cable blowing work in Italy, the practical questions concern cable diameter, duct internal diameter, route condition, available compressed air, and access at the entry point. Fibernet provides a direct point of contact for discussing these requirements and identifying which equipment configuration merits closer evaluation. Share the dimensions and characteristics of the cable and duct, together with the expected route length and working environment, so the conversation can focus on compatibility rather than assumptions. A machine should be considered as part of the complete blowing setup, not as an isolated purchase. The drill supplies mechanical drive, while compressed air supports cable movement through the duct; the precise operating arrangement and requirements must be confirmed for the selected model. This distinction matters when planning equipment for a site where a cordless drill is available but compressor capacity has not yet been checked. Searching for a drill powered optical fibre cable blowing machine does not mean that compressed air becomes unnecessary. Before mobilization, establish the required airflow and operating pressure with the manufacturer, and check that hoses, connections, and air treatment arrangements are appropriate. Cable handling deserves equal attention. The drum must release cable smoothly, the approach to the machine should avoid unnecessary bending, and the crew needs clear communication between the feed position and other relevant access points. Excessive resistance should trigger investigation, not an automatic increase in pushing force. Ask how the proposed setup controls cable feeding, how contact pressure is adjusted, and which operating limits protect the cable being installed. These details help a buyer assess usability without relying on unsupported promises about installation speed or maximum reach. When comparing an optical fibre cable blowing machine, request the applicable technical documentation and a clear explanation of the components included in the quotation. Confirm whether the drill, cable guides, duct adapters, seals, and other required accessories are included or specified separately. For projects in Italy, also discuss delivery arrangements, documentation requirements, and the route for obtaining technical assistance. Fibernet's Italian manufacturing background offers a relevant starting point for contractors seeking made in Italy equipment with support available in the United States and worldwide. The next step is a requirements discussion built around your actual cable blowing job. That approach helps establish what needs to be verified before ordering and gives purchasing teams a clearer basis for comparing configurations, preparing the site, and avoiding preventable delays when the installation crew arrives.

Prepare the blowing setup before the crew reaches the duct

An effective cable blowing operation is usually shaped before the machine is placed beside the duct. Begin with a route review that records bends, intermediate access points, changes in elevation, and any known restrictions. Check duct continuity and condition using the procedures specified for the project, and resolve suspected obstructions before introducing the cable. A drill driven optical fibre cable blowing machine cannot compensate for a damaged duct, an unsuitable cable and duct combination, or poorly prepared connections. Its suitability depends on the working conditions and the configuration approved for the equipment. Give Fibernet a practical description of the route and the intended installation method so that technical discussions address the conditions your operators will actually encounter. At the entry point, allow room for stable machine positioning, controlled cable payout, and safe access to the drive and air connections. Arrange the drum so that cable approaches the feeding mechanism without sharp changes in direction. Keep the immediate working area clear of loose materials that could interfere with handling or contaminate components. Before connecting compressed air, inspect the relevant fittings and follow the equipment instructions for securing the duct and establishing the seal. Never assume that adapters which look similar are interchangeable; confirm the correct parts for the cable and duct dimensions involved. Contractors considering a battery powered optical fibre cable blowing machine should distinguish between the drive power source and the air supply needed for the blowing process. A cordless drill may simplify drive arrangements where permitted by the machine specification, but battery compatibility, drill suitability, and operating settings still require confirmation. Plan battery charging and spares according to the actual workload rather than an assumed runtime. Similarly, assess compressor availability independently, including the required air quality and any supporting equipment specified by the manufacturer. During operation, use the recommended startup procedure and observe cable behavior continuously. If feeding becomes irregular, stop and investigate possible causes such as restricted payout, a sealing issue, or increased resistance along the route. Do not treat additional force or pressure as a universal remedy. A pneumatic optical fibre cable blowing machine may have a different drive arrangement, making a careful comparison of operating requirements more useful than a simple comparison of product labels. Ask Fibernet which approach fits your work pattern and what checks should be completed before deployment. After the installation, follow the specified shutdown and depressurization procedure before disconnecting the setup. Clean and inspect the relevant contact surfaces, guides, seals, and connections as instructed, and record wear or damage for attention before the next job. Consistent preparation and maintenance help crews repeat a controlled process without implying that every route will deliver the same installation distance or production rate.

Evaluate Italian manufacturing, ownership costs, and support

Buying cable blowing equipment is a decision about ongoing working capability, not simply the initial invoice. Fibernet was founded in 2001, drawing on the technical experience of founder Giancarlo Trinei, whose work with early optical cable installations in Italy dates to the 1980s. The company introduced its first cable blowing machine, Lady, in 2021. This background provides context for discussions with a manufacturer that combines family ownership with an ambition to serve contractors internationally. For a buyer assessing a drill driven optical fibre cable blowing machine, however, the most useful evidence remains the proposed configuration, documented operating requirements, and the support arrangements available for that specific purchase. Ask for these details in a form that purchasing staff and site supervisors can both review. A meaningful quotation should identify the machine, the accessories required for your cable and duct sizes, and any items that must be sourced separately. Establish whether the proposed package includes the necessary guides, seals, adapters, and connection components, and clarify the drill and compressor requirements. When reviewing an optical fibre cable blowing machine price, compare equivalent packages rather than assuming that the lowest headline amount represents the lowest cost of ownership. Delivery terms, applicable taxes, replacement wear parts, maintenance requirements, and access to technical assistance all influence the practical value of the purchase. For equipment destined for Italy, confirm the documentation and conformity information applicable to the supplied model, rather than treating manufacturing origin as a substitute for those checks. Made in Italy is an important part of Fibernet's identity, supported by assistance in the United States and worldwide. Buyers should still confirm the communication channels, service process, parts availability, and shipment arrangements relevant to their location. American contractors coordinating work with Italian operations can use this discussion to clarify who handles technical questions and how equipment information will reach the crew. Avoid assuming a particular response time or local repair arrangement unless it is explicitly agreed. A second hand optical fibre cable blowing machine deserves an equally detailed review, especially when its service history or accessory compatibility is uncertain. Before comparing a previously owned unit with a new quotation, check its condition, identification, documentation, wear components, and suitability for the intended cable range. Ask what inspection would be needed and whether replacement parts remain available; do not presume that support terms transfer automatically. Fibernet's family values and technical heritage can make the purchasing conversation more direct, but the final decision should rest on verified requirements. Send the team your cable and duct dimensions, expected workload, site conditions, and delivery destination to discuss an appropriate equipment proposal. This gives your organization a sounder basis for budgeting, planning deployment, and supporting the machine throughout its working life.

Still looking for information about drill driven optical fibre cable blowing machine?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information