Cable blowing machines · Made in Italy

Looking for "drill driven optical fiber cable blowing machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose a blowing machine around the cable, duct, and working conditions

Selecting a drill driven optical fiber cable blowing machine starts with understanding the installation rather than assuming that one configuration suits every route. Contractors working on projects in Italy need to consider cable diameter, duct internal diameter, route geometry, access points, and the condition of the installed pathway. These factors influence how effectively compressed air can help move the cable and how much mechanical assistance is appropriate. Fibernet provides a point of contact for discussing these requirements and identifying which product information is needed before making a purchasing decision. Its Italian manufacturing background is relevant to buyers seeking equipment developed with practical installation work in mind, while its assistance in the United States and worldwide supports companies operating across different markets. A drill driven cable blowing machine uses a drill as the source of mechanical drive, but buyers should verify the exact operating arrangement for the model under consideration. Drill compatibility, permitted rotational speed, torque requirements, drive adjustment, and the way the cable is guided through the machine should all be clarified before work begins. Do not assume that every drill or battery platform is suitable. Ask which accessories are required for your cable and duct combination, whether those accessories are included, and what must be changed when moving to a different installation size. These questions help turn a product inquiry into a usable equipment specification. Equally important is the relationship between the machine and the air supply. A compressed air optical fiber cable blowing machine depends on suitable pressure and airflow at the installation point, not simply on a compressor having an impressive nominal rating. Hose length, connection restrictions, leakage, and duct condition can affect the air available during operation. Confirm the manufacturer's requirements and compare them with the actual equipment planned for the site. Before starting an installation, establish that the duct is continuous, correctly connected, and prepared according to the relevant installation procedures. Check that the cable can enter the machine without tight bends or avoidable resistance, and arrange the payout so it does not introduce unnecessary drag. A useful inquiry to Fibernet therefore includes the cable data sheet, duct dimensions, intended route length, approximate number of bends, and compressor details. Photographs of the working area can also help explain access constraints. This information supports a focused discussion about compatibility without relying on unsupported promises about speed or distance. The objective is to choose equipment that fits the work, understand its limitations, and prepare the installation so the crew can use it consistently and responsibly.

Prepare the installation to reduce interruptions and protect the cable

On a live installation site, productivity depends as much on preparation as on the blowing machine itself. Before positioning a drill driven optical fiber cable blowing machine, the crew should establish a clear working area, identify the receiving location, and agree on communication between personnel at each end of the route. Cable payout, machine alignment, air connections, and access to controls should be organized before compressed air is introduced. This approach helps avoid situations in which an operator must correct a preventable obstruction while the equipment is already running. For contractors working along roads or within restricted service areas in Italy, the available workspace may also influence where the machine and cable reel can be safely positioned. The setup should follow the equipment documentation and the project's applicable safety arrangements. A cable blowing machine for fiber optic cable installation needs correctly matched contact surfaces, guides, seals, and duct connections. Components should be inspected for wear, contamination, or damage before use, with particular attention to anything touching the cable jacket. Excessive mechanical pressure is not a substitute for solving resistance elsewhere in the route. If the cable stops advancing or movement becomes irregular, the appropriate response is to pause and investigate within the manufacturer's procedures. Potential causes can include poor payout, an unsuitable connection, duct leakage, a tight bend, or an obstruction. Continuing to apply drive without understanding the cause can put the cable and equipment at risk. The crew should also respect the cable manufacturer's installation limits rather than treating the machine's capabilities as permission to exceed them. When assessing a drill driven fiber optic cable jetting machine, ask how the operator controls forward movement and how the selected model addresses overload or abnormal resistance. These features must be confirmed from product documentation; they should not be assumed from a general equipment description. Establish which observations the operator should monitor, what requires an immediate stop, and which adjustments are permitted during normal operation. Suitable personal protective equipment, secure pressurized connections, and controlled access to the work area remain essential. Never disconnect pressurized components before following the specified isolation and depressurization procedure. Recording installation conditions provides practical value for subsequent work. Note the cable and duct combination, route characteristics, compressor arrangement, accessories fitted, and any interruptions encountered. These records can help explain why two apparently similar sections behave differently and make technical support conversations more productive. Fibernet can be contacted with these details when discussing equipment suitability or troubleshooting needs. Italian-made equipment backed by assistance in the United States and worldwide is most useful when the support request describes the actual configuration. Good preparation, disciplined observation, and clear documentation support repeatable working methods without depending on unrealistic assumptions about universal installation performance.

Evaluate Italian manufacturing, support, and long-term equipment value

Buying a drill driven optical fiber cable blowing machine is a decision about ongoing working capability, not just an initial purchase price. Contractors should assess the complete package: the machine, application-specific accessories, compatible drive requirements, documentation, maintenance needs, and access to technical assistance. A lower headline cost can become less attractive if the required duct adapters or cable guides are missing, or if the intended drill is unsuitable. Conversely, a carefully specified package can make planning easier by establishing what the crew will actually receive and what additional equipment must be available. Request a written quotation that identifies the configuration and clearly separates included items from optional accessories. For buyers in Italy, commercial discussions should also establish delivery arrangements, applicable taxes, warranty terms, and the process for requesting service. Fibernet was founded in 2001, drawing on the technical experience of founder Giancarlo Trinei, whose work with optical fiber began during the early development of installations in Italy. The company introduced its first cable blowing machine, Lady, in 2021. This history provides context for its development as an Italian manufacturer, but purchasing decisions should still be based on the documented capabilities of the specific machine being considered. Ask for the current technical information rather than transferring assumptions from another model or an older product description. Fibernet's family business background and generational transition are part of its identity; practical buyers can translate their interest in that continuity into concrete questions about product support, replacement components, and ongoing communication. Companies comparing a new machine with a used optical fiber cable blowing machine should look beyond visible condition. Previous maintenance, wear in the drive assembly, availability of correctly sized accessories, and the condition of air connections can materially affect the purchase assessment. Obtain the operating documentation and verify that replacement parts remain available for the exact model. An apparent saving should be evaluated against inspection costs, missing components, and the possibility of downtime. Where optical fiber cable blowing machine rental is being considered instead, confirm availability, configuration, responsibility for wear, and support arrangements with the provider; do not assume that Fibernet offers rental simply because it is an option in the wider market. Support expectations deserve the same attention as machine specifications. Fibernet offers assistance in the United States and worldwide, making it relevant to businesses coordinating Italian and American operations. Before ordering, ask which communication channels are available, how a technical issue should be documented, and how service or replacement components are handled for your location. Avoid assuming guaranteed response times or local stock unless these are expressly confirmed. A focused inquiry through the company website can bring these questions together, helping the buyer evaluate an Italian-made solution against real installation requirements and a clearly understood support process.

Still looking for information about drill driven optical fiber cable blowing machine?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information