Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a drill driven fibre optic cable jetting machine starts with the relationship between the cable, the duct and the route, rather than with an advertised installation distance. Contractors working in Italy need equipment that suits the actual conditions of their projects: restricted access, changes in direction, different duct dimensions and varying cable constructions. A useful enquiry therefore includes the cable outside diameter, duct internal diameter, intended route length and available compressed air supply. These details help establish whether a proposed machine configuration is appropriate and which accessories require confirmation. Fibernet provides a direct point of contact for discussing these requirements, with an Italian engineering background shaped by practical installation experience. Before selecting equipment, distinguish between the source of mechanical drive and the source of airflow. In a drill-driven arrangement, a compatible drill supplies mechanical motion to the feeding mechanism, while compressed air supports the cable's movement through the duct. Drill power does not eliminate the need to assess compressor suitability, and a cordless drill does not make the complete installation independent of an air supply. Anyone comparing a drill driven fibre optic cable blowing machine should ask about the permitted drill specification, coupling arrangement, operating direction and adjustment procedure for the particular model under consideration. These are configuration questions, not details to assume from a product category name. Cable protection deserves equal attention. Feeding components must match the cable, and the operating settings must respect the cable manufacturer's installation limits. Excessive feed force can cause damage, particularly when an obstruction or tight bend prevents forward movement. Operators should understand the manufacturer's stopping procedure and avoid trying to overcome resistance simply by increasing drive input or air pressure. The duct should be checked for continuity, cleanliness and suitability before the machine is connected. Connections, seals and entry guides also need inspection because leakage or poor alignment can undermine an otherwise suitable setup. A compressed air fibre optic cable jetting machine should be assessed as part of this complete working arrangement, including hoses, connectors and any required air preparation equipment. For procurement teams, the most productive next step is a technical discussion supported by real job information. Share the planned cable and duct combinations, explain access restrictions and identify the power and air resources available on site. Ask Fibernet to confirm the applicable operating range, supplied components and optional items in writing. This creates a clearer basis for comparing proposals and helps installers avoid purchasing equipment around assumptions that have not been checked against their intended applications. It also makes the eventual site handover more useful, because the crew can work from an agreed configuration rather than discovering compatibility questions during the first installation.
A productive installation depends on preparation long before the drill starts turning. Begin by reviewing the duct route and identifying the points where changes in direction, joints or restricted access could affect cable movement. Confirm that the duct has been prepared and checked using procedures appropriate to the project specification. A route that contains contamination, water or damaged sections should not be treated as ready merely because both ends are accessible. Position the cable supply so that the cable enters the feeding mechanism without unnecessary twisting or a sharp change in direction. Provide enough working space for the operator to observe the inlet, control the drive and communicate with the rest of the crew. When evaluating a drill driven fibre optic cable jetting machine, ask how the machine is supported during operation and how its guides, seals and feeding components are changed between approved cable sizes. Setup convenience matters, but it must not replace secure mounting and correct alignment. The drill and any associated batteries should be suitable for the specified duty, and the operating arrangement must follow the equipment manufacturer's instructions. Avoid assuming that every drill with a similar appearance offers the same torque behaviour, speed control or coupling compatibility. Likewise, the air connection needs a verified pressure rating and a suitable connection method. Compressor selection should consider the required airflow at working pressure rather than the maximum pressure figure alone. During installation, the operator should monitor progress and respond to changes rather than relying on a fixed setting throughout the route. A reduction in cable movement can indicate increasing resistance, an air supply problem or an issue with the cable feed. Follow the prescribed stopping and troubleshooting sequence instead of adding force without understanding the cause. Before opening any pressurised connection, isolate the supply and release pressure according to the relevant instructions. Keep hands, loose clothing and other objects away from moving feeding parts, and use the protective measures specified for the equipment and site. A cable jetting machine for fiber optic cable installation is most useful when the crew also has a clear recordkeeping process. Record the cable and duct dimensions, route identification, relevant operating settings and any interruptions encountered. These records can help explain differences between installations and support more focused discussions with the equipment supplier. After the job, inspect contact surfaces and seals, remove contamination using approved methods and check for wear before packing the machine away. Fibernet can be contacted with these practical requirements when discussing a suitable configuration. Providing photographs of the intended setup and accurate technical information can make that conversation more effective, without suggesting that any single machine or operating setting will suit every route.
A machinery purchase should be assessed against the work it must perform and the support needed to keep it usable. The initial quotation is only one part of that assessment. Buyers should establish exactly what is included, which components are required for their cable and duct combinations, and what must be supplied separately. A drill driven fibre optic cable jetting machine may be considered alongside other drive arrangements, but the comparison should use equivalent working requirements rather than product labels alone. Ask for a written description of the proposed configuration, its documented operating limits and the accessories necessary for the planned applications. Where a drill, compressor or air preparation equipment is not included, identify the required specification before approving the purchase. Searches for fibre optic cable jetting machine price often lead to offers that cannot be compared directly. One proposal may include particular guides or seals, while another may assume those items will be ordered separately. Shipping, applicable taxes, replacement wear components and service arrangements can also affect the overall cost. For projects in Italy, confirm delivery terms and the relevant commercial details with the supplier rather than assuming that an international website presents a complete local quotation. Ask what documentation accompanies the machine and which conformity information applies to the equipment being offered. Fibernet was founded in 2001 and draws on the technical background of founder Giancarlo Trinei, whose experience with fibre optic installations dates to the early 1980s. The company introduced its first cable blowing machine, Lady, in 2021. These milestones provide context for a discussion about its equipment, but the suitability of a specific model still needs to be established from current specifications. Buyers interested in Italian-made equipment can ask Fibernet to confirm the manufacturing origin of the proposed model and explain the assistance available for Italy, the United States and other international destinations. Support coverage, response arrangements and replacement part availability should be confirmed for the customer's actual location. A used fibre optic cable jetting machine requires additional checks before its purchase price can be judged fairly. Request the model identification, maintenance history, details of previous repairs and evidence of the condition of feeding components, guides and seals. Establish whether documentation and compatible replacement parts remain available. For new equipment, ask about warranty terms, routine maintenance and the process for reporting a technical issue. The strongest purchasing decision connects these commercial questions with the installation requirements identified by the crew. Contact Fibernet through its website with your cable dimensions, duct details, anticipated workload and delivery destination to request a proposal that can be evaluated against a clearly defined scope.
Fill out the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.