Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a drill driven fibre optic cable blower begins with the cable and duct combination, not simply the availability of a suitable drill. Installation contractors working in Italy need equipment selected around actual cable dimensions, duct internal diameter, route conditions, and the working space available at the entry point. Fibernet develops Italian-made cable blowing equipment and provides assistance in the United States and worldwide, giving procurement teams a direct starting point for discussing their application. Before requesting a recommendation, gather the cable manufacturer's dimensional tolerances, allowable pushing force, minimum bend radius, and handling instructions. Record the duct specifications as well, including any changes in diameter or connection type along the intended run. These details help establish whether a proposed configuration is appropriate rather than relying on a broad description of the project. A drill driven fibre cable blower uses a drill to power the mechanical feeding mechanism, while an appropriate air supply assists cable movement through the duct. The drill does not replace the compressor, and the suitability of both must be checked against the selected machine's requirements. Buyers should therefore ask about drive compatibility, operating limits, connection arrangements, and the accessories needed for their specific cable sizes. They should also clarify which components are included in the quotation and which must be supplied separately. For a contractor comparing a cable blower for fibre optic cable, the useful question is how the complete setup will behave under the anticipated site conditions. A short, relatively straight route and a longer route with multiple bends can place very different demands on the same equipment. Duct cleanliness, connection integrity, cable stiffness, and the quality of the air supply all influence installation behavior. None of these factors should be overlooked when planning production targets. Provide Fibernet with a realistic description of the route and ask which operating parameters require confirmation before work begins. Where an installation includes several duct and cable combinations, identify each combination separately so that accessory requirements can be assessed accurately. This preparation also helps avoid arriving on site with an unsuitable seal, guide, or connection. The objective is not to select the largest machine or the highest advertised speed, but to establish a compatible, controllable installation arrangement. A technically informed conversation can help buyers distinguish essential requirements from optional additions and build a quotation around equipment that fits the intended work. For teams purchasing Italian-made machinery for use in Italy or coordinating projects with American colleagues, clear documentation of dimensions, units, and operating conditions makes that conversation more productive.
A successful cable blowing operation depends on preparation across the entire installation setup. Before positioning a drill driven fibre optic cable blower, assess access around the duct entrance, the stability of the working surface, and the space required to manage the cable without sharp changes in direction. Place the cable supply so that it can feed smoothly toward the machine, following the cable manufacturer's handling requirements. Uncontrolled payout, excessive resistance at the reel, or an awkward entry angle can compromise the operation even when the blowing machine itself is correctly selected. Establish clear communication between the operator and anyone monitoring the cable supply or the receiving end. The team should agree on stop signals and understand the relevant safety procedures before equipment is energized or pressurized. Inspect the duct using methods appropriate to the project specification, checking for obstructions, contamination, leakage, and unsuitable connections. Compressed air cannot compensate for a damaged or poorly prepared route, and increasing pressure is not a substitute for investigating unexpected resistance. When evaluating a compressed air fibre optic cable blower, confirm both the required airflow and permitted pressure for the particular machine and application. Compressor selection should consider delivered performance under operating conditions rather than a headline rating alone. Air treatment requirements, hose suitability, coupling compatibility, and any pressure losses between the compressor and machine also deserve attention. Use only configurations and operating practices approved for the equipment. The feeding mechanism requires equally careful setup. Guides and seals must suit the cable and duct dimensions, and cable contact settings must follow the manufacturer's instructions. Excessive contact force can damage the cable jacket, while insufficient contact can cause slipping and inconsistent feeding. A drill powered fibre optic cable blower should also be paired with a compatible drill operated within the specified limits; available drill power alone does not establish suitability. Start according to the prescribed procedure and observe how the cable advances rather than chasing speed immediately. If movement becomes irregular or stops, pause and investigate the cause using the equipment's safety instructions. Do not repeatedly force the cable forward in the hope of overcoming an unidentified restriction. Keep a record of the cable type, duct size, route characteristics, equipment configuration, and operating observations for each job. These records can support later troubleshooting and help teams prepare more effectively for similar installations. Fibernet can be contacted to discuss the proposed application and the information needed for equipment selection. By treating the machine, air supply, cable handling, and duct condition as one coordinated setup, contractors can make better decisions before installation starts and respond more methodically when site conditions differ from the plan.
The purchase decision for a drill driven fibre optic cable blower should account for more than the initial machine cost. Contractors need to understand what they are receiving, how the equipment will be configured for their work, and whom they can contact when questions arise. Fibernet was founded in 2001 by Giancarlo Trinei, whose technical experience reaches back to the early development of fibre installations in Italy. The company introduced its first cable blowing machine, Lady, in 2021. That background gives buyers a concrete company history to explore when assessing a supplier of Italian-made equipment. For projects in Italy, as well as purchasing teams coordinating with American operations, Fibernet offers assistance in the United States and worldwide. Buyers should confirm the practical arrangements for their location, including contact channels, documentation, spare parts availability, and the procedure for obtaining technical assistance. Asking these questions before ordering helps set realistic expectations without assuming that every support service has the same scope or turnaround. When comparing fibre optic cable blower price quotations, request a clearly itemized description of the proposed configuration. Check whether guides, seals, duct connections, hoses, carrying arrangements, and other application-specific items are included or quoted separately. Clarify drill and compressor requirements, since these can affect the total investment even when they are not supplied with the machine. Also ask which maintenance tasks are expected from the operator and which activities require qualified assistance. Routine inspection and appropriate cleaning can be important to equipment care, but the correct procedures must come from the relevant instructions rather than general assumptions. A quotation becomes more useful when it identifies the intended cable and duct combinations instead of describing only a machine category. Teams considering a used fibre optic cable blower should apply the same discipline while giving additional attention to condition, completeness, and service history. Inspect cable contact surfaces, guides, seals, connections, and structural components, and verify that suitable replacement parts and operating documentation can be obtained. A lower purchase price may be less attractive if essential accessories are missing or compatibility cannot be established. Do not assume that a previously successful installation proves suitability for a different cable or duct. Whether buying new equipment or assessing an existing machine, send Fibernet the details that define the actual application. Include dimensions, route conditions, anticipated work volume, and the equipment already available to your crew. This allows the discussion to focus on practical compatibility and ownership requirements rather than unsupported performance promises. The result is a more informed purchasing process centered on Italian manufacturing, appropriate configuration, and a clear understanding of support for the working life of the equipment.
Fill out the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.