Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a drill driven fibre cable blowing machine starts with the relationship between the cable, the duct, and the installation route, rather than with an advertised headline speed. For contractors preparing work in Italy, a useful equipment inquiry should include the cable outside diameter, duct inside and outside diameters, approximate section lengths, and the number and severity of bends. These details help establish whether a proposed machine configuration is appropriate and which accessories need to be discussed before ordering. Fibernet provides a point of contact for exploring cable blowing equipment backed by an Italian technical heritage. Its first cable blowing machine, Lady, was launched in 2021, building on experience that reaches back to the earliest fiber installations in Italy. When assessing a drill driven cable blowing machine, distinguish the mechanical feeding function from the compressed air supply. The drill drives the feeding mechanism, while suitable airflow helps move the cable through the duct; the drill does not replace the compressor. Consequently, compressor selection should be checked against the requirements of the specific machine, the duct system, and the intended installation. Ask for the necessary operating pressure and airflow specifications rather than assuming that any compressor already on site will be adequate. Equally important is confirming drill compatibility, including the required coupling, operating mode, speed range, and any restrictions stated in the equipment instructions. A purchasing conversation should also cover how the machine accommodates the chosen cable and duct sizes. Depending on the design, this may involve dedicated guides, seals, inserts, or other setup components. Confirm what is supplied as standard and what must be ordered separately. Before work begins, the duct should be assessed for continuity, cleanliness, and suitability for pressurized installation using the applicable project procedures. Damaged joints, contamination, excessive bends, or unsuitable cable dimensions can undermine performance even when the machine itself is correctly selected. A drill driven fibre optic cable blowing machine should therefore be evaluated as part of a complete installation setup, not as an isolated purchase. For an Italian project involving several short sections, practical priorities may include convenient repositioning, straightforward setup changes, and access to the correct replacement wear parts. Longer or more demanding routes require a more detailed discussion of route conditions and operating limits. Neither situation justifies a guaranteed installation distance without reviewing the actual conditions. Share your project information through www.fibernetsrlusa.com to request product guidance and clarify which configuration deserves closer consideration. The objective is a well-matched cable blowing setup that operators can use within documented limits, with fewer uncertainties when the equipment reaches the jobsite.
A successful cable blowing operation depends on preparation and controlled adjustments throughout the run. Before positioning a drill driven fibre cable blowing machine, review the manufacturer's instructions and the project safety procedures, then establish a stable working area with suitable access to the duct entry. Arrange the cable supply so that it can pay off smoothly without sharp changes in direction or unnecessary resistance. Check that the cable reel arrangement, entry alignment, and working space allow the crew to observe the feed path without approaching moving parts. A clean, organized setup helps operators recognize abnormal behavior earlier and reduces avoidable interruptions. The machine should be configured only with components approved for the relevant cable and duct dimensions. Seals and guides need to fit correctly, and the feeding mechanism must be adjusted according to the manufacturer's requirements. Excessive contact force can damage the cable jacket, while insufficient engagement can produce slipping and inconsistent feeding. The appropriate setting is not a universal value: it depends on the equipment design and the cable being installed. If your team is comparing a drill powered fibre cable blowing machine with another feeding arrangement, ask how setup adjustments are made and what checks are required before introducing compressed air. Air connections, hoses, couplings, and the duct connection must all be suitable for the intended operating conditions. Never improvise around pressure ratings or disconnect a pressurized assembly. The shutdown and depressurization sequence should be understood before the installation starts, and any protective equipment should follow the relevant risk assessment. During operation, coordinate mechanical feeding with the air supply in accordance with the equipment instructions. Avoid assuming that increasing speed or pressure will resolve every slowdown. A change in cable movement may indicate a route restriction, a reel payout problem, a sealing issue, or another condition that needs investigation. Stop and assess the cause rather than repeatedly forcing the cable forward. Teams considering a drill driven optical fibre cable blowing machine should also ask what operating information can be observed directly and which measurements require separate instruments. Do not assume that distance measurement, force limitation, or automatic stopping is included unless the specific product documentation confirms it. Keeping a simple installation record can support later troubleshooting: note the cable and duct sizes, section identification, relevant settings, interruptions, and any corrective actions. After the run, isolate the equipment, release pressure safely, and inspect the feeding surfaces, guides, and seals as instructed. Clean and store the machine appropriately so that contamination does not become the next crew's problem. Discuss these operational questions with Fibernet before purchase to understand the proposed equipment, the necessary accessories, and the documentation available for your application. A deliberate process makes the machine easier to integrate into repeatable jobsite routines without relying on unsupported performance expectations.
The useful cost of a drill driven fibre cable blowing machine is broader than the figure shown on a quotation. Buyers need to understand what the quoted configuration includes, what supporting equipment is required, and which items may need replacement during normal use. A machine offered without the guides, seals, or connections needed for your cable and duct combination may require additional spending before it can enter service. Equally, an attractive initial price does not establish whether a product suits your route conditions or your crew's working methods. When researching fibre cable blowing machine price, request a clearly itemized proposal that separates the machine, size-specific accessories, optional components, delivery, and any applicable commercial charges. Confirm whether the drill and compressor are included or must be sourced separately, rather than making assumptions from photographs or general descriptions. For projects in Italy, ask about delivery arrangements, documentation language, applicable conformity information, and the terms governing warranty and service. The domain www.fibernetsrlusa.com can serve as an initial contact point, but the practical arrangements for the destination and proposed product should be confirmed directly. Fibernet was established in 2001 and draws on the technical background of its founder, Giancarlo Trinei, whose experience includes work on early Italian fiber installations during the 1980s. That history offers context for the company's development of cable blowing equipment, including the introduction of Lady in 2021. Its family business continuity also includes the arrival of Matteo, Marta, and Ismael in 2010. For a buyer, however, company heritage should complement a detailed equipment assessment rather than replace one. If Italian manufacture is a purchasing requirement, ask for confirmation of the manufacturing origin of the specific model and configuration being quoted. Similarly, companies coordinating installations across Italy, the United States, or other countries should verify support coverage for each destination. Request the appropriate contact channels, service procedures, spare parts arrangements, and any limitations before committing to a purchase. Do not treat worldwide assistance or a particular response time as guaranteed unless those commitments are documented. A comparison involving a drill driven OFC cable blowing machine should account for operational fit as well as purchasing conditions. Consider how many cable and duct sizes your crews actually encounter, how frequently configurations change, and whether keeping essential wear parts available would reduce interruptions. Ask which maintenance tasks operators can perform and which require authorized service. A focused inquiry containing these details allows a more useful commercial discussion than a request for the lowest price alone. Contact Fibernet through its website to describe your cable blowing requirements, request an appropriate quotation, and establish the product and support details needed for an informed decision.
Fill out the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.