Cable blowing machines · Made in Italy

Looking for "drill driven fibre cable blower"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around the job, not assumptions

Choosing a drill driven fibre cable blower starts with understanding the cable, duct, and working conditions that the equipment must accommodate. For telecommunications contractors, the important question is not simply whether a machine can move cable, but whether its configuration suits the installation without exposing the cable to unnecessary mechanical stress. Cable diameter, duct internal diameter, route condition, and the cable manufacturer's installation limits all belong in the initial discussion. Fibernet provides a direct point of contact for reviewing these requirements before you select equipment. Its background combines Italian technical experience with a business established in 2001 and the development of its first cable blowing machine, Lady, in 2021. When assessing a drill driven cable blower, distinguish the mechanical drive from the compressed air supply. The drill provides the driving input, while the blowing process also depends on an appropriate air supply and correctly prepared duct. Compatibility with a particular drill, compressor, cable, or duct must be confirmed for the proposed machine rather than inferred from the product category. Ask which cable guides, seals, and duct connections are needed, whether those parts are supplied, and how the drive arrangement is adjusted. These details help buyers compare complete working configurations instead of apparently similar machines with different included components. On site, preparation is just as important as equipment selection. Inspect the duct route, confirm that joints and connections are suitable for the intended operating conditions, and check that the cable can feed smoothly from its reel. A damaged duct, an unsuitable connection, or excessive resistance at the reel can undermine an otherwise appropriate setup. Follow the equipment instructions for checking duct condition and establishing the working area, including safe handling of compressed air. A cable blower for fibre optic cable should therefore be evaluated as part of a coordinated installation process, not as a substitute for route preparation. For projects in Italy, share the actual site constraints rather than relying on a distance estimate alone. Tight access, frequent bends, changes in elevation, and the availability of a suitable compressor can affect practical planning. Buyers serving American installation teams can use the same application review to identify requirements before equipment is deployed. Fibernet's Italian manufacturing identity and support in the United States and worldwide provide a useful basis for that conversation, while the specific arrangements should be confirmed for each purchase. Send the cable and duct specifications, describe the intended work, and request confirmation of the appropriate configuration. That approach makes the selection more transparent and helps your crew arrive with equipment matched to the task.

Build a controlled setup for consistent cable feeding

A productive cable blowing operation depends on keeping several interacting elements under control. Before starting a run, the crew should understand how the selected machine grips the cable, how its driving input is regulated, and which operating limits apply to the cable and duct. With a drill driven fibre cable blower, the drill must be compatible with the machine and used according to the manufacturer's instructions. More driving force is not automatically better: excessive force can damage a cable, while an unsuitable setting can make feeding inconsistent. Confirm the recommended adjustment procedure and the correct response when resistance increases. The aim is controlled advancement within the applicable limits, not the highest possible drill speed. Arrange the working area so the cable approaches the machine without sharp bends or avoidable side loading. Position the reel securely and provide an unobstructed feed path, taking account of the cable manufacturer's minimum bend radius. Inspect contact surfaces and the components that guide or seal around the cable. Incorrectly sized or worn parts can affect feeding and air containment, so checks should be based on the instructions for the actual model. A drill powered fibre cable blower also requires careful coordination between its drive arrangement and its pneumatic setup. Check the required air pressure, airflow, hose connections, and compressor suitability before work begins; do not assume that pressure alone describes an adequate air supply. During installation, watch for changes in feeding behavior and follow the specified stopping procedure if movement becomes irregular. Continuing to drive against an unexplained obstruction can turn a recoverable interruption into cable damage. Once the system has been made safe, investigate likely causes such as reel resistance, an unsuitable machine adjustment, a duct issue, or a connection problem. Any inspection involving compressed air equipment should follow the relevant isolation and depressurization instructions. Recording the setup and the conditions of each run can help a contractor distinguish recurring equipment issues from route specific difficulties. Useful records include the cable and duct dimensions, machine configuration, route characteristics, and the circumstances of any stoppage. When discussing a drill driven fibre optic cable blowing machine with Fibernet, ask for the operating documentation and clarify the consumable parts needed for your application. Establish how routine checks, cleaning, storage, and replacement of wear components should be handled. For contractors moving equipment between sites in Italy or supporting crews in the United States, these practical details help maintain a repeatable preparation process. Fibernet can be contacted about product selection and assistance, including support requirements outside Italy. Confirm the available service arrangements, replacement components, and technical contact process before purchase so that your operational plan reflects the equipment and support actually supplied.

Assess the complete purchase and the support behind it

An equipment quotation is most useful when it explains what your crew will receive and what else the job requires. When considering a drill driven fibre cable blower, ask for a clearly defined configuration rather than comparing headline prices alone. The quotation should identify the machine, the cable and duct sizes covered by the proposed setup, and any additional components needed for your application. Clarify whether a compatible drill, compressor, air treatment equipment, hoses, or connection accessories must be sourced separately. None of these items should be assumed to be included simply because they appear in a demonstration or installation example. This distinction helps purchasing teams calculate a realistic project budget and prevents site crews from discovering missing requirements after delivery. A meaningful fibre cable blower price comparison also considers the parts likely to require replacement, the availability of different guides or seals, and the process for obtaining technical assistance. Ask which maintenance tasks the operator can perform and which require service support. Request the applicable warranty terms in writing, together with delivery information and the procedure for reporting an issue. For equipment moving between countries, establish the relevant shipping responsibilities and commercial terms with the supplier. These questions are particularly important when purchasing decisions are made in one country while the machine will be operated in another. They turn a price enquiry into a practical assessment of readiness, ownership, and support. Fibernet brings a family business history to this discussion. Founded in 2001, the company draws on the experience of Giancarlo Trinei, whose work with optical fibre began during the early installations in Italy in the 1980s. The next generation joined the business in 2010, and the launch of Lady in 2021 marked a milestone in its cable blowing equipment development. For a buyer, that background provides context, but the decision should still rest on documented suitability for the intended work. Ask how the offered equipment addresses your cable dimensions, duct requirements, and expected working conditions. Italian manufacture is relevant to the product's identity; verified application details establish whether it fits your crew. When evaluating a fibre cable blower, discuss the assistance available in the United States and worldwide, including the communication channel and the information needed to diagnose a problem. Confirm service coverage and response arrangements rather than assuming a particular turnaround time. For projects in Italy, provide the same level of detail about local operating conditions and delivery needs. A useful enquiry includes cable specifications, duct dimensions, route characteristics, expected workload, and any equipment already available on site. Contact Fibernet through www.fibernetsrlusa.com to request a configuration review and a quotation based on those facts. You can then assess the proposed solution against a clear operational requirement instead of relying on generic performance expectations.

Still looking for information about drill driven fibre cable blower?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information