Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a drill driven fibre blowing machine starts with the installation you need to complete, not with an isolated speed figure. Cable diameter, duct internal diameter, route geometry, available compressed air, and the cable manufacturer's handling limits all influence whether a proposed setup is suitable. For companies evaluating Italian-made equipment, Fibernet provides a direct point of contact for discussing these requirements before selecting a machine. The objective is practical: establish which configuration fits the cable and duct combination, identify the accessories required, and clarify the operating conditions that must be met on site. A productive inquiry therefore includes the cable specification, duct dimensions, approximate route length, and information about bends or intermediate access points. Photographs of the working area can also help explain constraints that a dimensional drawing alone may miss. In a typical drill-assisted blowing arrangement, the drill supplies mechanical drive while compressed air helps carry the cable through the duct. These functions must work together within the limits specified for the particular equipment. More pushing force is not automatically better, and increasing air pressure does not resolve every installation problem. An unsuitable seal, restricted duct, contaminated air supply, or incorrect drive adjustment can undermine the process even when the machine itself is appropriate. Anyone comparing a drill driven fibre cable blowing machine should therefore ask how cable guidance, sealing components, and drive contact are configured for the intended application. Confirm the permitted drill characteristics rather than assuming an existing tool will be compatible. Ask which adapters are included, which are optional, and whether another cable size requires different components. These details matter when preparing a crew for consecutive jobs with different duct arrangements. Fibernet's technical background gives this discussion a clear context: the company was established in Italy in 2001, and its development of blowing equipment reached an important milestone with the launch of Lady in 2021. That history supports a product-focused conversation, but the final selection still needs to rest on documented compatibility rather than broad promises. Request the relevant operating instructions and technical data for the proposed model, then compare them with the actual job conditions. For purchasing teams in Italy coordinating with English-speaking installation crews, keeping a shared specification sheet reduces misunderstandings about dimensions, accessories, and operating requirements. Record both metric and imperial measurements where necessary, with conversions checked before ordering. This preparation turns an initial product inquiry into a useful equipment assessment and helps ensure that the machine delivered is configured for the work planned, rather than merely matching a search term.
Reliable operation of a drill driven fibre blowing machine depends on what happens before the cable begins moving. Start with the duct route and the approved installation procedure: confirm that the pathway is continuous, suitably prepared, and ready for the intended cable. Check joints, accessible entry points, and any conditions that could create air leakage or mechanical resistance. Duct verification should follow the project specification and the equipment manufacturer's instructions, including the appropriate cleaning or proving steps. Position the cable supply so that it feeds smoothly toward the machine without sharp changes of direction, uncontrolled loops, or unnecessary drag. A poorly arranged reel can introduce resistance upstream of the drive mechanism, making a duct problem appear to be a machine problem. The compressor deserves equal attention. Pressure alone does not describe whether an air supply is suitable; usable airflow, hose restrictions, connection sizes, and air quality also affect the installation. Confirm the machine's stated requirements and verify that the compressor can meet them under working conditions. Use the specified air treatment and connections, and inspect hoses and couplings before pressurization. Only trained personnel should operate the equipment, with appropriate protective measures and a clear procedure for stopping the job. Never disconnect a pressurized component, and do not improvise operating limits when the correct information is unavailable. During setup, verify that the cable guides, seals, and drive components match the cable dimensions. Apply the adjustments described in the operating manual rather than tightening components until slipping simply disappears. Excessive contact force can damage a cable jacket, while insufficient control can lead to inconsistent feeding. Buyers researching a drill driven fibre optic cable blowing machine should ask how these adjustments are made and what checks the operator must perform before starting. A short, controlled initial run can help confirm that the cable enters cleanly and that the arrangement behaves as expected, provided that this is consistent with the approved procedure. During installation, monitor cable movement and respond to unexpected resistance instead of repeatedly increasing force. Stop safely, investigate the cause, and reassess the route or setup when required. Record the cable and duct combination, air supply details, settings permitted by the manufacturer, and any issues encountered. These records make subsequent planning more useful than relying on a single remembered installation distance. They also help distinguish an equipment configuration issue from a site condition. For contractors working across multiple projects in Italy, consistent preparation and clear operating records support better handovers between crews. The benefit is not a guaranteed distance or speed, but a more disciplined process for protecting the cable, diagnosing interruptions, and using the selected blowing equipment within its documented capabilities.
A quotation for a drill driven fibre blowing machine should explain what your team will receive and what remains necessary before the first installation. The base machine price is only one part of that decision. Depending on the proposed configuration, the complete setup may also require cable-specific components, duct connections, compatible drive equipment, compressed air accessories, and replacement wear parts. Request an itemized quotation so that purchasing staff and site supervisors can evaluate the same scope. If you compare offers using the phrase fibre blowing machine price, make sure the comparison covers equivalent equipment and accessories rather than headline figures alone. A lower initial amount may exclude components that your cable range requires, while a more comprehensive package may still include items that are not relevant to your work. Neither can be assessed properly without a clear application brief. Ask Fibernet to identify the proposed model, its documented compatibility range, the supplied components, and any prerequisites that your company must provide. Also clarify delivery arrangements, applicable commercial terms, warranty conditions, and the process for requesting technical assistance. Fibernet is a family-led Italian company whose technical roots extend to founder Giancarlo Trinei's work on early fiber installations in Italy during the 1980s. The business welcomed Matteo, Marta, and Ismael into its generational transition beginning in 2010, preserving its founding values while pursuing international growth. For equipment buyers, this background is most relevant when connected to practical questions about product continuity, technical communication, and support. The Italian-made product proposition is accompanied by assistance for customers in the United States and worldwide; confirm the specific channels, availability, and arrangements applicable to your location before ordering. For an installation team in Italy, that means establishing who will handle technical questions, how the machine will be identified when requesting help, and what information support staff need to investigate an issue. Keep the serial number, configuration details, operating documentation, and purchase records accessible. When reporting a problem, describe the cable and duct dimensions, the air supply, the observed behavior, and the checks already completed. Clear evidence helps support personnel distinguish between wear, incorrect setup, and an application mismatch without unnecessary guesswork. Ownership planning should also cover routine inspection, cleaning, storage, and replacement of parts identified by the manufacturer as service items. Ask which maintenance tasks operators may carry out and which require authorized assistance. Avoid assuming that a compact machine needs no maintenance simply because it is easy to transport. A well-defined purchasing discussion connects Italian manufacturing with the everyday realities of deployment: the right configuration, understandable documentation, a realistic support pathway, and a transparent account of the equipment needed to begin work.
Fill out the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.