Cable blowing machines · Made in Italy

Looking for "drill driven fibre blower"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around the job, not assumptions

A drill driven fibre blower should be selected around the cable, duct and working conditions your crew actually encounters. For contractors carrying out installations in Italy, that means looking beyond a machine description and establishing whether the proposed configuration suits the route. Cable outside diameter, duct internal diameter, cable stiffness and the condition of the installed pathway all influence the installation process. A straight, clean section presents different challenges from a route with multiple bends, intermediate connections or changes in elevation. Before requesting a recommendation, collect these details and identify the equipment already available on site. This gives Fibernet a practical starting point for discussing a suitable cable blowing solution rather than relying on a general claim about performance. Drill assistance supplies mechanical feeding effort, while compressed air helps move the cable through the duct; the correct combination must be established for the specific equipment and application. Neither additional pushing force nor higher pressure should be treated as a universal answer to resistance. Operating limits, cable handling requirements and the manufacturer's instructions remain essential throughout the job. When evaluating a drill driven fibre cable blower, ask which cable guides, seals and duct connections are required for your intended sizes. Also establish the compatible drill requirements and the air supply conditions specified for the proposed machine. Compressor suitability depends on more than a headline pressure figure, because available airflow and air quality can affect the installation. Confirm these requirements before arranging transport or committing a crew to a work window. A useful enquiry includes the cable and duct specifications, anticipated route length, bend information and any known restrictions at the launch point. Photographs of the access area can also help explain space constraints that are difficult to describe in a short message. For example, a crew working beside a roadside chamber may need to consider equipment positioning, stable support and access to the cable reel before any blowing begins. These details help turn a product enquiry into an informed technical discussion. Fibernet brings an Italian engineering background to this conversation, supported by a company history that began in 2001. Its first cable blowing machine, Lady, was launched in 2021, marking a specific step in the company's development of installation equipment. For an American contractor assessing equipment for projects in Italy, that background provides context without replacing the need to verify the selected configuration. Explore the available options with Fibernet and request guidance based on your application. The objective is a well-matched setup with clear operating requirements, not an unsupported promise about distance, speed or compatibility.

Prepare the launch point for controlled cable feeding

Successful cable blowing starts before the drive mechanism turns. At the launch point, the crew needs a clear understanding of the duct route, the condition of the pathway and the handling limits of the cable. Check that the duct has been prepared and assessed using the procedures specified for the installation, and confirm that connections are suitable for the intended operating conditions. Dirt, moisture, damaged sections or poorly assembled joints can undermine the operation regardless of the machine selected. Position the cable reel so that payout remains controlled and does not introduce unnecessary bending or drag. Keep the feeding path orderly, provide stable support for the equipment and establish communication with personnel at relevant access points. A drill driven fibre blower belongs within this coordinated setup rather than being treated as an isolated tool that compensates for every route problem. Before starting, verify that the fitted components match the cable and duct sizes, inspect the contact surfaces and follow the manufacturer's assembly sequence. Confirm the drill settings and connection method specified for the equipment instead of assuming that any available power tool is suitable. The same discipline applies to compressed air: check the permitted operating range, required supply characteristics and connection arrangements before pressurising the system. Do not loosen pressurised connections, bypass protective provisions or attempt adjustments while moving parts remain active. Where a drill powered fibre blower is being assessed for a changing workload, ask how configuration changes should be performed and which replacement components may be needed. Knowing this in advance helps a supervisor plan jobs involving different cable sizes without improvising at the roadside. During installation, watch the behaviour of the cable, reel and feeding mechanism together. A developing restriction may appear as irregular movement or an unexpected change in feeding behaviour. If conditions depart from the approved operating procedure, stop and investigate safely rather than repeatedly increasing force. Record the circumstances so that the next decision is based on evidence: route position, cable length introduced, observed behaviour and the setup in use. These notes can support a more productive technical conversation if assistance is needed. When comparing a drill driven fibre blowing machine for your fleet, consider how easily your team can inspect it, identify the correct accessories and obtain relevant operating documentation. Ask Fibernet about maintenance instructions, replacement parts and support arrangements for the exact configuration under consideration. No single checklist guarantees a particular installation distance, because route geometry and material condition remain influential. Nevertheless, careful preparation makes the operation more predictable and gives the crew a consistent basis for deciding when to proceed, pause or request advice. That is a more useful purchasing criterion than an isolated performance figure without stated test conditions.

Italian manufacturing with support planning for international crews

Buying cable blowing equipment is an operational decision as well as a technical one. The initial quotation matters, but so do configuration completeness, documentation, replacement components and access to assistance after delivery. Fibernet's proposition combines Italian-made equipment with assistance in the United States and worldwide. For an American company arranging installations in Italy, this international perspective is relevant when purchasing decisions, field operations and equipment support involve different locations. Discuss the practical arrangements before ordering: where the machine will be delivered, where it will be used and which team will handle technical questions. Ask for confirmation of available support channels, service procedures and parts supply for that destination. Do not assume that availability, shipping times or service response will be identical in every country. Clear expectations are more valuable than broad assurances, particularly when a crew has a scheduled access window and limited flexibility to postpone the installation. When reviewing a drill driven fibre blower, request a quotation that identifies the proposed machine configuration and distinguishes included items from optional accessories. Clarify whether the drill, compressor connections, cable guides, seals and transport provisions are included or must be arranged separately. The answer can change the practical cost of putting the equipment into service. A comparison based only on fibre blower price may overlook these differences and leave purchasing teams comparing packages that are not equivalent. Maintenance requirements also deserve attention. Ask which inspections are expected, how wear components are identified and what information should accompany a request for replacement parts. Keeping the machine identification and configuration details accessible can make later enquiries more precise. Fibernet's family background helps explain the continuity behind its development. Founded in 2001, the company draws on Giancarlo Trinei's experience with early fibre installations in Italy during the 1980s. A generational transition began in 2010 with Matteo, Marta and Ismael joining the business, bringing a new phase of development while retaining the founding family's involvement. That history is relevant to the company's identity, but the purchasing decision should still rest on documented suitability for your work. If your team is evaluating a drill driven fiber optic cable blower using American terminology, describe the actual cable and duct dimensions rather than relying on the wording of a product search. Provide metric measurements where available, and clearly identify units whenever information is exchanged between teams. This reduces avoidable ambiguity during configuration discussions. Contact Fibernet through its website with your application details, destination and support questions to request a proposal aligned with your installation needs. A useful outcome is not simply a machine on an order form, but a clear understanding of the equipment, accessories and assistance required to put it to work responsibly.

Still looking for information about drill driven fibre blower?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information