Cable blowing machines · Made in Italy

Looking for "drill driven fiber optic cable jetting machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose a drill driven jetting setup around your cable and duct

Choosing a drill driven fiber optic cable jetting machine starts with the installation conditions, not simply the availability of a drill. The machine must provide controlled mechanical feeding while compressed air helps carry the cable through a suitable duct. Those two actions need to work together: excessive pushing can damage the cable, while inadequate airflow or a poorly prepared route can prevent steady progress. For contractors evaluating equipment from Fibernet, the most useful first step is to share the cable outside diameter, duct inside diameter, intended route length, and any known bends or changes in elevation. These details support a meaningful compatibility discussion rather than a recommendation based on distance alone. A cable jetting machine for fiber optic cable installation should be selected with attention to the complete working arrangement. Ask which cable guides, duct connectors, seals, and drive components are required for the proposed application, and whether those items are included or supplied separately. Cable jacket characteristics also matter because the feeding system must transfer force without applying inappropriate pressure. Before committing to a purchase, confirm the permitted cable dimensions and the manufacturer's instructions for adjusting the feeding mechanism. Drill compatibility deserves equally careful attention. Establish the required drill interface, operating mode, rotational direction, speed control, and any restrictions specified for the selected machine. Do not assume that every cordless drill is suitable or that an impact setting can be used. The drill supplies mechanical drive; it does not remove the need to assess the compressed air requirements of the jetting process. A compressed air fiber optic cable jetting machine depends on suitable air delivery at the working point, including adequate flow, pressure, and connections within the equipment's stated limits. Compressor selection therefore requires more than comparing maximum pressure labels. Hose length, connector restrictions, and site conditions can affect the air available during operation. For installations in Italy, crews should also check access arrangements, safe equipment positioning, and the documentation required for the particular worksite. Fibernet's Italian manufacturing background gives buyers a relevant starting point for discussing made in Italy equipment, but specific performance figures should always come from the documentation for the proposed model. Request a configuration that matches the actual cable and duct combination, together with clear operating guidance and information about assistance in the United States and worldwide. That approach helps purchasing teams compare complete, usable solutions instead of selecting a machine on an isolated feature. It also gives field supervisors a clearer basis for planning the first installation, checking accessories before departure, and avoiding preventable delays caused by missing adapters or incompatible components.

Prepare the route before adjusting the machine

A successful installation often depends on decisions made before the cable reaches the machine. Start by confirming that the duct route is continuous, correctly connected, and suitable for the planned operation. Follow the duct supplier's and equipment manufacturer's procedures for checking its condition and preparing it for cable jetting. Water, debris, damaged joints, or unexpected restrictions can undermine performance even when the machine itself is correctly configured. Route records should identify access points, significant bends, and sections where the crew may need to investigate an interruption. When evaluating a drill driven fiber optic cable jetting machine, consider how easily the operator can position it in line with the duct entrance and manage the cable supply without introducing unnecessary resistance. The reel should pay out smoothly, and the approach to the feeding mechanism should respect the cable manufacturer's bending limits. Poor reel handling can create resistance that operators might mistakenly try to overcome by increasing pushing force. Instead, identify the source of resistance and correct it before continuing. At setup, verify that the fitted seals and guides match the cable and duct sizes. Inspect components for contamination or wear, secure connections according to the instructions, and establish a controlled working area around the equipment. Compressed air presents stored energy hazards, so depressurization and isolation procedures are essential before opening connections or changing components. The crew should understand who controls the drill, who watches the cable supply, and how a stop instruction will be communicated. A drill powered fiber optic cable jetting machine should be operated within its documented limits, with feeding speed and air settings adjusted according to the approved procedure rather than an assumed universal setting. Start cautiously and observe how the cable responds. Unexpected movement, slipping, unusual noise, or a sudden change in progress warrants investigation. Increasing pressure or drill speed without understanding the cause can make a manageable issue more serious. Whether a contractor describes the equipment as a cable blowing machine for fiber optic cable installation or as a jetting unit, the practical objective remains controlled advancement without compromising cable integrity. Keep a simple installation record covering the cable and duct dimensions, route characteristics, equipment configuration, operating observations, and any interruptions. These notes help distinguish route problems from setup problems on later jobs. They also make technical assistance more useful because the support team receives concrete information rather than a general report that the cable stopped. Discuss available assistance with Fibernet before deployment, including the information needed when requesting help from Italy, the United States, or another operating location. Good preparation cannot guarantee a particular installation distance, but it creates a more reliable basis for safe operation, realistic scheduling, and consistent troubleshooting across different crews.

Compare the complete purchase and support package

The purchase decision should account for everything needed to put the equipment to work, not just the machine shown in a product photograph. For a drill driven fiber optic cable jetting machine, request an itemized quotation that identifies the machine configuration, supported cable and duct dimensions, supplied accessories, and any separately required components. Clarify whether the drill, air hoses, connectors, seals, and transport provisions are included. Where components are supplied by the buyer, obtain the relevant compatibility requirements before ordering them. This prevents an apparently economical purchase from creating additional sourcing work immediately before a scheduled installation. A useful assessment of fiber optic cable jetting machine price also considers maintenance access, replacement wear parts, documentation, and support arrangements. Ask which components require routine inspection, how adjustments should be checked, and what information is needed to identify replacement parts correctly. The aim is not to assume that one configuration suits every contractor, but to understand the operating commitments associated with the proposed equipment. Buyers comparing a used fiber optic cable jetting machine with a new unit should examine the completeness of the package as carefully as its condition. Missing guides, worn feeding components, damaged seals, or unavailable instructions can affect readiness for work. Establish the unit's identity, inspect its condition through an appropriate process, and confirm whether relevant parts and assistance remain available. A lower initial amount does not automatically translate into a lower cost for the intended job. Fibernet brings a family business background and an Italian technical heritage to these discussions. Founded in 2001, the company developed from the experience of Giancarlo Trinei and introduced its first cable blowing machine, Lady, in 2021. That history provides context for the company's product development, but buyers should still request current specifications for the exact model under consideration rather than transferring assumptions from one product to another. For businesses purchasing made in Italy equipment for use in Italy or deployment by American crews, support planning should be explicit. Ask Fibernet to explain assistance arrangements in the United States and worldwide, including contact channels, applicable service procedures, and how replacement components are supplied to the intended destination. Confirm warranty terms, shipping responsibilities, and expected availability directly in the quotation; do not infer them from a general description of international support. A technically useful inquiry includes the contractor's typical cable sizes, duct sizes, anticipated workload, existing compressor details, and preferred deployment date. With that information, the conversation can focus on fit, readiness, and ownership requirements. Explore the equipment information on www.fibernetsrlusa.com and contact Fibernet to discuss a configuration and quotation grounded in your installation conditions rather than a generic performance promise.

Still looking for information about drill driven fiber optic cable jetting machine?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information