Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a drill driven fiber optic cable blowing machine starts with understanding the installation, not simply selecting a convenient power source. Contractors need equipment suited to the cable diameter, duct dimensions, route condition, and available compressed air. A drill supplies mechanical drive to the feeding mechanism, while airflow helps carry the cable through the duct. These functions work together, but neither eliminates the need for careful preparation. Before selecting equipment, provide Fibernet with the cable specification, duct internal diameter, expected route length, and details of bends or intermediate access points. This information supports a meaningful compatibility discussion instead of an assumption based on a product name. For crews working in Italy, including American contractors coordinating local installation projects, documenting measurements in both millimeters and inches can also prevent purchasing errors. The most useful comparison considers the complete working setup. Check which drill interfaces are supported, what operating limits apply, which cable guides and duct connectors are needed, and whether the required accessories are included or ordered separately. A drill driven fiber cable blowing machine should be assessed as part of this complete system rather than treated as a standalone substitute for installation planning. Ask how the selected configuration controls cable feeding and how the operator should respond if resistance increases. Excessive mechanical force can damage a cable even when the equipment appears to be advancing it successfully. Cable manufacturer limits therefore remain essential reference points throughout the job. Air supply deserves equal attention. Compressor pressure alone does not describe installation capability; delivered airflow, connection losses, duct leakage, and air quality can all influence results. Confirm the requirements for the proposed machine and route before mobilizing a compressor. Similarly, inspect the duct for continuity and cleanliness using an appropriate procedure, and verify that seals and connectors match the actual components on site. These checks help identify problems before a cable is committed to a difficult run. When comparing a cable blowing machine for fiber optic cable installation, ask for a clear explanation of what determines achievable distance rather than relying on a universal maximum. A straight, clean duct and a route with multiple tight bends present different conditions. Fibernet can be contacted to discuss the application and clarify the specifications of available equipment. The objective is a configuration that fits the work, with understandable operating requirements and a practical accessory plan. That approach gives purchasing teams a stronger basis for approval and helps field supervisors prepare a repeatable installation method without assuming that every cable and duct combination will behave identically.
A productive cable blowing operation begins before the drive mechanism turns. Position the machine securely, arrange the cable supply so that it can pay out without snagging, and establish communication between everyone involved in the run. The operator needs access to the controls and a clear understanding of the stopping procedure. Anyone monitoring the receiving end should remain outside potential discharge hazards and follow the equipment instructions. Compressed air stores energy, so hoses, couplings, seals, and duct connections must be suitable for the intended operating conditions. Depressurization is required before opening pressurized assemblies or making adjustments where the manual calls for it. These are practical considerations for selecting and using a drill driven fiber optic cable blowing machine, not optional details to address after production begins. Before feeding cable, verify the duct route and inspect accessible connections. A leaking joint can reduce the airflow available to move the cable, while contamination or an unsuitable bend can create resistance that additional drive force will not safely resolve. Where lubrication is appropriate, use a product compatible with the cable jacket and duct material, following the relevant instructions. Avoid assuming that more lubricant always improves performance. The correct application method and quantity depend on the installation system. For a compressed air fiber optic cable blowing machine, compressor selection should reflect both the equipment requirements and the conditions of the route. Confirm hose sizing, available airflow, filtration requirements, and any specified air treatment with the equipment supplier. During the run, introduce drive and airflow according to the operating procedure rather than immediately demanding maximum output. Observe the cable feed and watch for changes that may indicate increased resistance, irregular payout, or a connection problem. If progress becomes inconsistent, stop and investigate instead of forcing the cable forward. The allowable pushing force and bend radius specified by the cable manufacturer remain important even when the machine offers adjustable feeding. A cable jetting machine for fiber optic cable installation is most useful when paired with disciplined observation and a crew that understands the relationship between mechanical feeding and air assistance. Record the cable type, duct size, route characteristics, and relevant operating settings after each installation. These records help supervisors compare similar runs, identify recurring preparation issues, and plan future equipment needs. They also give technical support a more useful starting point if troubleshooting becomes necessary. For contractors moving between Italian jobsites, a consistent checklist can reduce avoidable setup differences between crews. The goal is not to promise a fixed installation speed, but to create controlled conditions in which the selected equipment can operate within its documented limits.
Fibernet brings an Italian engineering background to the practical demands of cable blowing. Founded in 2001, the company draws on Giancarlo Trinei's technical experience with early fiber installations in Italy during the 1980s. Its first cable blowing machine, Lady, was introduced in 2021. Those milestones provide context for the company's development, but procurement decisions still need to be based on the current product documentation and the requirements of the intended installation. If you are evaluating a drill driven fiber optic cable blowing machine, request confirmation of the available configuration rather than assuming that a particular model includes every drive option or accessory. Fibernet's made in Italy positioning is relevant to buyers seeking Italian equipment, while assistance in the United States and worldwide matters to companies coordinating projects across borders. Before placing an order, clarify how that assistance applies to your location, including contact arrangements, troubleshooting procedures, spare parts availability, and the handling of any equipment return. For American businesses operating in Italy, it is useful to identify who will manage technical communication locally and who will authorize replacement parts or service work. Agreeing on these responsibilities before deployment avoids confusion when a crew needs a quick operational decision. A purchasing comparison should also look beyond the initial fiber optic cable blowing machine price. Ask what is included in the quotation, which cable and duct sizes require additional components, and what routine maintenance the machine needs. Freight, replacement seals, wear components, compressor provision, and drill compatibility may influence the overall cost of putting the equipment to work. None should be assumed to be included unless the quotation expressly confirms it. Buyers considering a used fiber optic cable blowing machine should investigate its condition with the same care. Request the maintenance history, inspect the feeding components and sealing surfaces, and establish whether suitable parts and documentation remain available. A lower purchase price may be less attractive if missing accessories or uncertain wear make the equipment difficult to deploy reliably. New equipment should receive an equally disciplined review: obtain the manual, check the declared operating range, and confirm the applicable documentation for use in Italy. Ask which pre-use inspections, cleaning steps, and storage practices are recommended for the selected model. Fibernet's family-led development and international ambitions can support a direct conversation about these practical requirements without replacing the need for written specifications. Contact the company through its website with your cable data, duct dimensions, project location, and intended working method. A detailed inquiry gives the team a stronger basis for discussing a suitable configuration and helps your purchasing and field teams evaluate the same set of requirements.
Fill out the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.