Cable blowing machines · Made in Italy

Looking for "drill driven fiber blowing machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around the conditions on your jobsite

Choosing a drill driven fiber blowing machine starts with the cable and duct you actually need to work with, rather than a headline installation distance. Cable diameter, duct internal diameter, route geometry, and the condition of the installed pathway all influence the result. For American contractors evaluating Italian-made equipment, the practical question is whether a proposed configuration matches the work their crews encounter every day. Fibernet provides a starting point for that conversation through its cable blowing equipment business, built on technical experience and a product development approach focused on practical installation needs. Before selecting a machine, share the cable specification, duct dimensions, expected route length, and available compressed air supply so the discussion addresses a real application rather than an assumed operating scenario. A drill driven fiber cable blowing machine uses mechanical feeding together with compressed air to move suitable cable through a compatible duct. The drill supplies the drive input, while the air helps carry the cable along the pathway and reduce resistance during installation. Successful operation depends on balancing these elements within the equipment manufacturer's instructions and the cable manufacturer's limits. Increasing drive force is not a substitute for finding a restriction, correcting an unsuitable setup, or checking whether the duct is ready. Crews should establish appropriate operating settings before committing to a longer section and monitor feeding behavior throughout the run. A useful equipment assessment also considers how operators prepare the cable entry, secure the machine, align the feed path, and check seals and connections. These details matter because poor alignment or an incorrect interface can undermine otherwise suitable equipment. Ask which cable guides, duct connections, and sealing components are required for your dimensions, and confirm whether they are included in the proposed supply. Drill compatibility should also be checked explicitly; do not assume that every drill, battery arrangement, or operating mode is suitable. When comparing a drill driven cable blowing machine with another configuration, consider the entire working setup, including the compressor, hose arrangement, preparation tools, and replacement consumables. Portability alone does not establish that a machine is appropriate for a particular route. Equally, a compact system should not be dismissed without checking its documented application range. Fibernet introduced its first cable blowing machine, Lady, in 2021, adding a dedicated product milestone to its technical background. For your purchasing decision, request current specifications and an application review rather than relying on general descriptions. That approach helps procurement teams and field supervisors agree on what the equipment needs to achieve, which accessories are necessary, and what conditions must be verified before work begins.

Build a repeatable installation process without relying on maximum-distance claims

A productive cable blowing operation begins before the drill turns. The crew needs a clear understanding of the proposed duct section, the cable handling arrangement, the compressor supply, and the stopping conditions for the installation. With a drill driven fiber blowing machine, preparation is particularly important because the operator must manage the relationship between mechanical feed and air-assisted movement. The right objective is controlled progress within documented limits, not the highest possible feed setting. Establishing a repeatable sequence helps contractors reduce avoidable interruptions while protecting the cable and the equipment. Start by confirming that the duct is suitable for the intended operation and has been checked according to the applicable installation procedure. Unexpected resistance can come from contamination, a damaged section, an unsuitable connection, or a route that differs from the drawing. The blowing machine cannot compensate for every pathway problem. Cable presentation also deserves attention: the supply reel should permit smooth payout without introducing unnecessary drag, twisting, or sharp changes in direction before the cable reaches the feed mechanism. Keep the working area organized so the operator can observe the equipment and communicate with other crew members. Before starting, verify that the drill driven fiber optic cable blowing machine configuration is approved for the selected cable and duct dimensions. Check the fitted guides and seals, the security of connections, and the condition of contact surfaces that engage the cable. Confirm the required air characteristics against the machine documentation, including any specified requirements for pressure, flow, and air preparation. Compressor pressure alone does not describe the available operating capability, so purchasing and site teams should consider the complete air supply arrangement. Never exceed the lowest applicable limit among the machine, duct, cable, and connected components. During installation, changes in cable movement should trigger assessment rather than an automatic increase in force. If progress becomes irregular or stops, follow the prescribed shutdown and troubleshooting procedure. Isolate and depressurize the system as directed before opening connections or adjusting components. A drill powered fiber blowing machine still requires a disciplined process; the convenience of its drive source does not remove the need for safe handling of compressed air and moving parts. After each run, record useful operating observations, inspect accessible wear components, and clean the equipment according to its instructions. Over time, these records help crews distinguish recurring setup issues from route-specific difficulties. When speaking with Fibernet, describe the actual symptoms and provide the machine configuration, cable dimensions, duct details, and operating conditions. Clear information makes technical assistance more focused and helps your team assess whether a change in setup, a replacement component, or a different equipment configuration is appropriate for the next installation.

Evaluate Italian-made equipment with support and ownership costs in view

The purchase price of a drill driven fiber blowing machine is only one part of an equipment decision. Contractors also need to understand what is supplied, which applications the configuration supports, and how assistance will be arranged when questions arise. Fibernet combines an Italian manufacturing identity with assistance for customers in the United States and worldwide. For an American company assessing equipment for its installation crews, this creates an opportunity to discuss both the product and the practical requirements of operating it away from its country of manufacture. Confirm the specific support arrangements for your location before placing an order, including contact channels, service procedures, and replacement parts availability. Fibernet was founded in 2001, drawing on the technical background of Giancarlo Trinei, whose experience with cable installation and testing began in Italy during the early 1980s. The business later welcomed Matteo, Marta, and Ismael into a generational transition that began in 2010. Its first cable blowing machine, Lady, was launched in 2021. These milestones explain the company's development, but procurement should still be based on current documentation and your own operating requirements. Ask for the relevant product information, identify the intended application, and make sure the written proposal clearly describes the selected configuration. When investigating fiber blowing machine price, compare quotations on an equivalent basis. One proposal may include accessories that another treats as optional, making the initial figures difficult to compare. Request a breakdown covering the machine, the cable and duct interfaces required for your work, any necessary drive equipment, and recommended consumables. Clarify shipping terms, applicable taxes or import costs, warranty conditions, and the process for obtaining technical assistance. These details help purchasing teams establish a realistic acquisition budget without assuming that every accessory or service is included. A useful ownership assessment also examines how the equipment will move between crews, how it will be stored, and who will check its condition. If your operation handles several cable sizes, ask which components must be changed between applications and how those changes should be performed. If a drill powered fiber cable blowing machine is being considered for occasional work, verify storage and maintenance requirements as carefully as you would for daily use. In either case, documented compatibility is more valuable than an unsupported promise of universal performance. Bring Fibernet a concise description of your typical installations, the equipment already available on site, and the constraints that matter most to your crews. You can then request a project-specific quotation and discuss Italian-made cable blowing equipment with assistance needs in the United States or other operating locations clearly defined. The result is a purchasing decision grounded in application fit, transparent scope, and a practical plan for continued operation.

Still looking for information about drill driven fiber blowing machine?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information