Cable blowing machines · Made in Italy

Looking for "drill driven fiber cable blower"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
US & Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around the conditions on your jobsite

Choosing a drill driven fiber cable blower starts with understanding the cable, duct, and working conditions rather than comparing headline installation distances. For contractors working on routes in Italy, the practical questions are specific: what is the cable outside diameter, what is the duct internal diameter, how many bends are present, and how much access is available at the launch point? Those details help establish whether a proposed machine configuration is appropriate and what additional equipment the crew will need. Fibernet brings an Italian manufacturing background to this discussion, with a business founded in 2001 and technical experience rooted in the earliest fiber installations in Italy. Its first cable blowing machine, Lady, was launched in 2021. For buyers evaluating a drill driven cable blower, the useful next step is to discuss the actual application with the company rather than assume that every model supports the same cable sizes, drill characteristics, or operating arrangements. A drill provides mechanical drive in this equipment category, while compressed air supports cable movement through the duct; the exact setup must follow the selected machine's documentation. Before requesting a recommendation, collect the cable manufacturer's limits for installation force and bending radius, the duct dimensions, the expected section length, and information about route continuity. Include details about the available compressor, particularly its delivered airflow and pressure under operating conditions, because pressure alone does not describe its suitability. A cable blower for fiber optic cable installation should be considered as part of this complete working arrangement, not as an isolated purchase. Duct cleanliness, effective sealing, cable condition, and controlled feeding all influence the result. An apparently straightforward section can become difficult if a coupling leaks, a bend is tighter than expected, or the cable pays off unevenly from its drum. Preparing these details gives Fibernet a clearer basis for discussing compatibility and identifying questions that need verification before dispatch. It also helps your purchasing team distinguish between essential accessories and items that may not be necessary for the planned work. Ask which guides, seals, duct connections, and wear components are required for the proposed configuration, and confirm whether these are included in the quotation. Where site teams use English but project documentation uses metric dimensions, record measurements clearly and avoid ambiguous size descriptions. This is particularly useful for American contractors coordinating equipment selection for work in Italy. The objective is a documented match between the machine and the installation, with realistic operating expectations and a clear understanding of the setup before the crew reaches the launch point.

Make preparation and controlled feeding part of every installation

An effective cable blowing operation is built around preparation, observation, and a willingness to stop when conditions change. Before positioning a drill driven fiber cable blower, establish a stable working area with suitable access to the duct entrance, cable drum, air connection, and machine controls. The cable should approach the feeding mechanism without unnecessary bends or contact with abrasive surfaces. Arrange the drum so that payout remains controlled throughout the operation, and assign responsibilities clearly when more than one person is involved. These measures are relevant whether the job involves a short connection between accessible chambers or a longer duct section with more demanding route geometry. The machine cannot compensate for a damaged duct, a poorly prepared connection, or an obstruction that has not been investigated. Check duct continuity and condition using procedures suitable for the infrastructure and the project specification, and verify that any cleaning or preparation materials are compatible with the cable and duct. When evaluating a drill powered fiber cable blower, ask how the approved drill connects, how the feed is controlled, and which operating limits apply to the complete assembly. Do not assume that a drill already carried by the crew is suitable without checking the machine manufacturer's requirements. Connection arrangements, rotational settings, torque behavior, and power availability should all be reviewed against the relevant documentation. The same discipline applies to compressed air: use approved connections and hoses, respect component ratings, and isolate and depressurize the system before opening connections or performing adjustments that require it. During installation, monitor cable movement and respond to changes rather than trying to overcome resistance by simply increasing force. Unexpected slowing, unstable feeding, or visible cable marking should prompt an assessment under the manufacturer's operating procedure. Cable damage can occur without an immediately obvious break, making controlled handling important even when the cable continues to move. For a crew comparing a drill driven fiber optic cable blower with another proposed configuration, practical usability deserves attention alongside nominal capacity. Consider access for loading the cable, changing compatible components, inspecting contact surfaces, and cleaning the machine after use. Ask Fibernet which routine inspections and replacement parts apply to the selected model, and request the relevant operating information before deployment. Record the setup used on each job, including cable and duct dimensions, compressor details, approximate route characteristics, and any interruptions. These records make subsequent troubleshooting more precise and help teams avoid repeating preventable problems. They also support more meaningful conversations with technical assistance, because the discussion can focus on observed conditions rather than assumptions about what happened inside the duct.

Assess Italian manufacturing, support access, and the full purchase scope

Purchasing a drill driven fiber cable blower is a decision about operational readiness as well as equipment. A quotation is most useful when it explains the proposed configuration, its compatibility boundaries, the included components, and the support arrangements available after delivery. Fibernet's identity combines Italian manufacturing with a family business history and an ambition to serve contractors internationally. Founded by Giancarlo Trinei in 2001, the company draws on his experience with early fiber installations and testing in Italy during the 1980s. A generational transition began in 2010 as Matteo, Marta, and Ismael joined the business, helping develop its next phase while maintaining its founding values. For customers, that background provides context, but the purchasing decision should still rest on documented equipment suitability and clear commercial terms. Made in Italy is relevant to the product's origin; it does not remove the need to confirm the specifications required for your cable blowing work. Fibernet offers assistance in the United States and worldwide, making support access an important topic for American companies evaluating Italian equipment or coordinating projects in Italy. Before ordering, ask which contact channel to use, what information is needed for troubleshooting, and how replacement components can be supplied to the intended operating location. Confirm service arrangements and delivery expectations directly rather than assuming identical availability in every country. When reviewing a fiber cable blower price, compare the complete scope instead of treating the base machine figure as the final project cost. Depending on the selected setup, the quotation may need to address cable guides, sealing components, duct connections, recommended spares, shipping, and other applicable purchasing costs. Clarify which items are included, which are optional, and which must be sourced separately. If the crew needs a drill powered fiber optic cable blower, request confirmation of the approved drive requirements and establish whether the drill and compressed air equipment are part of the supply. This prevents misunderstandings between procurement staff and field supervisors. Also consider the practical cost of an incomplete delivery: a missing compatible seal or connection can delay deployment even when the main machine has arrived. Share your expected applications with Fibernet, including the range of cable diameters and duct dimensions your teams actually encounter, rather than asking for the widest possible capability without a defined need. A focused equipment discussion can produce a more relevant configuration and a clearer accessory plan. Use the website to introduce your project, request product information, and arrange a quotation based on verified requirements. The result should be a purchasing decision supported by practical details, realistic expectations, and a clear route to assistance throughout the equipment's working life.

Still looking for information about drill driven fiber cable blower?

Fill out the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information