Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a cable jetting machine starts with the installation you need to complete, not simply the equipment you want to purchase. Cable diameter, duct internal diameter, route geometry, and available compressed air all influence whether a proposed setup is suitable. For telecommunications contractors working on street projects, these details affect preparation, handling, and the ability to keep installation progressing without placing unnecessary stress on the cable. Fibernet brings an Italian manufacturing background to this practical decision, with products made in Italy and assistance available in the United States and worldwide. Its first cable blowing machine, Lady, was launched in 2021, building on technical experience that reaches back much further through founder Giancarlo Trinei. Established in 2001, the company approaches equipment development with an emphasis on practical solutions for the people operating its products. When evaluating a cable jetting machine for fiber optic cable installation, begin by sharing the cable manufacturer's dimensions, permissible pushing force, minimum bend radius, and any installation restrictions. Pair that information with the duct specifications, including its pressure rating and the condition of its connections. A machine cannot compensate for an obstructed duct, leaking couplings, or a cable and duct combination that is unsuitable for the planned route. A useful equipment discussion therefore considers the complete installation arrangement rather than an isolated headline specification. Compressed air supports cable movement through the duct, while the machine's feeding mechanism introduces the cable in a controlled manner. The balance between these actions matters: excessive mechanical force can damage a cable even when the equipment appears to be advancing it successfully. Operators should work within documented limits and stop to investigate unexpected resistance instead of assuming that additional pressure or pushing force will resolve the problem. A compressed air cable jetting machine also requires an air supply matched to the application, with both pressure and airflow considered at the operating point. Compressor selection should account for losses through hoses and connections, not only the rating printed on the compressor. Before requesting a recommendation, assemble a short job profile covering typical cable sizes, duct sizes, route lengths, access locations, and compressor availability. Include whether the crew frequently changes between different cable and duct combinations, because that can influence the importance of compatible guides, seals, and setup procedures. Providing these details helps Fibernet discuss the appropriate configuration and identify information that still needs verification. The result is a more useful purchasing conversation: one centered on compatibility, safe operation, and realistic site conditions rather than unsupported promises about how far every installation will travel.
A quotation becomes meaningful when it describes equipment that can actually support your intended work. Comparing a bare machine with a package containing application-specific components can produce a misleading impression of value, particularly when the missing items are only discovered after delivery. Before comparing offers, define what the crew needs to arrive on site with a usable setup. This may include compatible cable guides, duct connections, sealing components, air connections, and other accessories specified for the selected equipment. Confirm what is included, what is optional, and what must be supplied separately. For a cable jetting machine, the right commercial question is not simply how much the unit costs, but what the quoted configuration enables your team to do. A discussion about cable jetting machine price should therefore cover the planned applications alongside the purchase terms. Explain the cable and duct combinations you expect to use most often, whether your work involves frequent setup changes, and which compressor you intend to connect. Ask for the equipment's documented operating limits and the requirements for compatible consumables or replacement components. Clear answers help purchasing staff avoid comparing unlike packages and allow site supervisors to assess whether the proposed arrangement matches their operating procedures. Ownership costs also extend beyond the invoice. Routine inspection, replacement of worn contact components, cleaning, transport protection, and appropriate storage all affect how equipment remains ready for use. Check which maintenance tasks operators can perform and which require technical assistance. Ask how replacement parts are identified, what information is needed when requesting support, and which service arrangements are available for your location. Fibernet's Italian-made equipment is supported by assistance in the United States and worldwide; the applicable arrangements, availability, and delivery expectations should be confirmed for each purchase rather than assumed. Contractors considering a used cable jetting machine face an additional set of checks. The condition of the feeding mechanism, seals, controls, and connection points matters more than appearance alone. Request identification details, service history where available, operating documentation, and confirmation that essential replacement parts can still be obtained. Verify that the actual configuration supports your cable and duct sizes instead of relying on a general description from the seller. These considerations are useful whether your procurement team is based in Italy or coordinating American field operations through an international purchasing structure. Currency, shipping responsibilities, applicable taxes, documentation, and destination-specific requirements should be clarified in the commercial offer. Share your delivery destination and intended use with Fibernet so the discussion can address the relevant configuration and supply conditions. A carefully scoped inquiry creates a firmer basis for a purchasing decision than a price comparison detached from the work ahead.
Successful cable blowing depends on a repeatable process that starts before the machine is connected. Review the route, identify access points, and confirm that duct preparation has been completed using appropriate procedures. Check continuity and integrity, assess whether cleaning is required, and verify that connections are suitable for the intended operating pressure. Follow the duct and equipment manufacturers' instructions for any testing or preparation activity. These checks help distinguish a machine setup issue from a route problem, reducing the temptation to adjust operating settings without understanding the cause of poor progress. Once the installation area is prepared, place the cable jetting machine securely and arrange the cable feed to avoid sharp changes in direction. Drum handling should allow controlled payout without introducing twisting or excessive tension. Keep hoses and working areas organized, protect connections from contamination, and establish clear communication between personnel at the feeding position and other access points. Pressurized systems require particular care: isolate the air supply and release pressure according to the relevant instructions before opening connections or making adjustments. Never treat a stalled installation as a reason to loosen a pressurized fitting. During setup, verify that guides and seals match the actual cable and duct dimensions. Inspect the cable contact surfaces and adjust the feeding mechanism only as instructed for the equipment and cable being used. A fiber optic cable jetting machine should be operated within the documented limits of the complete system, including the cable, duct, couplings, and air supply. Begin with a controlled procedure and observe how the cable responds. Unexpected changes in progress, unusual noise, visible cable deformation, or unstable feeding call for investigation. Potential causes can include duct leakage, unfavorable bends, contamination, insufficient airflow, or an incorrectly configured feed path; increasing force without diagnosis can make the situation worse. Recording basic installation information supports more effective troubleshooting. Note the cable and duct specifications, estimated installed distance, route characteristics, operating settings, compressor details, and the point at which behavior changed. Where safe and appropriate, photographs of the setup and connection arrangement can provide useful context for a technical discussion. When seeking help with a compressed air fiber optic cable jetting machine, this information is generally more actionable than reporting only that the cable stopped moving. Fibernet combines its Italian product background with assistance in the United States and worldwide, giving contractors a point of contact for discussing equipment-related questions. Confirm the appropriate support channel and available service arrangements when planning your purchase. After each job, inspect and clean the equipment as directed, document wear or damage, and prepare required replacement items before the next deployment. This disciplined approach supports equipment readiness while keeping installation decisions tied to observable conditions rather than guesswork.
Fill out the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.