Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a fiber blower starts with understanding the cable, the duct and the conditions your installation team will encounter. For telecommunications contractors working on projects in Italy, equipment selection should reflect actual site requirements rather than a headline performance figure. Cable diameter, duct internal diameter, route length, changes of direction and compressor availability all influence the suitability of a machine. Fibernet brings Italian manufacturing and a practical technical background to this decision, helping prospective customers discuss their application before committing to equipment. Founded in 2001, the company introduced its first cable blowing machine, Lady, in 2021, building on experience that reaches back to founder Giancarlo Trinei’s work on early Italian installations during the 1980s. That history provides context for a product approach focused on the people operating the equipment at the worksite. A compressed air fiber cable blower combines controlled mechanical feeding with airflow through the duct. These two contributions must work together: the feed mechanism advances the cable while the moving air helps overcome friction along the route. Applying more pushing force is not automatically the answer when progress slows. Operators must consider duct condition, cable handling, bends, air supply and the limits specified for every component. Before selecting equipment, prepare the cable data sheet, duct dimensions and a realistic description of the route. Include details about access points, available working space and the compressor you intend to use. Ask which machine configuration is appropriate, which cable guides or seals are needed, and what operating limits apply to the proposed setup. These discussions are especially important when one team handles several cable sizes or regularly moves between different duct systems. A suitable fiber cable blower should be evaluated as part of that complete installation arrangement, not as an isolated purchase. For example, a contractor preparing a route with several bends needs to assess more than the distance between the entry and exit points. The condition and geometry of the duct can change how the cable behaves throughout the installation. Similarly, a team working across multiple sites should consider transport, setup procedures and access to replacement wear parts when comparing equipment. Fibernet’s Italian-made product offering is relevant to customers who value direct technical dialogue and clear information about machine suitability. Support is available in the United States and worldwide; customers should confirm the service arrangements applicable to their location and equipment. Contact Fibernet with your installation details to discuss the appropriate configuration, documentation and next steps for your project. This application-led approach creates a clearer basis for choosing equipment and preparing the crew that will operate it.
A useful equipment quotation should explain what your installation team needs to begin work, not simply provide a machine price. When comparing a fiber blower for a new project or an expanding fleet, start by identifying the configuration that matches your expected workload. The cable and duct sizes you use most frequently, the number of crews involved and the compressor resources already available all affect the purchasing decision. A lower initial figure may not represent the most appropriate choice if essential accessories, compatibility requirements or service arrangements remain unclear. Equally, purchasing capabilities that your projects do not require can tie up budget without improving site performance. Treat the fiber blower price as one element of a broader assessment that includes setup requirements, maintenance, replacement components and the practical consequences of equipment downtime. Ask for a clear description of the proposed machine and any included guides, seals, connections or other accessories. Confirm which items are necessary for your particular cable and duct combination and which are optional. If you plan to use an existing compressor, share its relevant specifications so compatibility can be assessed against the equipment requirements. Pressure alone is not a complete description of an air supply; available flow and air quality also matter. Avoid assuming that an air source suitable for another tool will automatically support cable blowing under your intended conditions. Maintenance deserves equal attention during the purchasing discussion. Request the manufacturer’s instructions for inspection, cleaning, lubrication where applicable, and replacement of wear components. Ask how spare parts are identified and ordered, and establish who should be contacted when technical assistance is needed. Fibernet supplies Italian-made equipment with assistance in the United States and worldwide, but the service process, shipping arrangements and availability of particular parts should be confirmed for your location. These details help purchasing teams compare proposals on a consistent basis. If you are considering a used fiber cable blower, examine the machine’s condition and documentation as carefully as its advertised price. Request its identification details, maintenance history where available, photographs of working components and evidence of a suitable functional inspection. Confirm that the required accessories are present and that replacement parts remain obtainable. Buying previously owned equipment does not remove the need to check compatibility with your application. For businesses operating in Italy, commercial comparisons should also distinguish equipment cost from any applicable delivery charges and taxes. Share your intended usage with Fibernet and request a quotation that identifies the proposed scope clearly. A well-defined proposal gives technical staff and purchasing managers the same reference point, reducing uncertainty before an order is placed and helping the business plan its equipment investment around real installation requirements.
Successful use of a fiber blower depends on preparation at the entry point and along the intended route. Before installation begins, the team should verify the applicable worksite safety requirements, review the machine instructions and establish clear communication between personnel at relevant access points. The equipment must be positioned securely, with enough space to handle the cable without introducing unnecessary bends or obstructions. Cable payout should be controlled so that the machine receives cable smoothly rather than pulling against a poorly managed reel. Check that the cable condition is acceptable and that its diameter matches the selected machine components. These basic checks are easier to complete before the air supply is connected and the installation sequence starts. Duct preparation is equally important. Confirm the intended route, inspect accessible connections and follow the relevant procedures for checking duct continuity and cleanliness. Any lubricant used must be suitable for the cable, duct and installation method, and applied according to the relevant instructions. A pneumatic fiber blower cannot compensate for every obstruction, damaged section or unsuitable connection. If a duct problem is suspected, investigate it rather than attempting to overcome resistance by increasing force or pressure. The operating limits of the cable, duct, fittings and machine must all be respected; the most restrictive applicable limit governs the setup. During operation, watch how the cable advances and respond to changes in behavior. An unexpected reduction in progress, abnormal noise or visible cable deformation calls for assessment using the manufacturer’s procedures. Do not treat a published maximum capability as a guaranteed result for every route. Achievable installation distance and speed depend on the actual combination of equipment, cable, duct geometry, airflow and preparation. Recording relevant settings and observations can help a contractor understand repeatable results across comparable jobs, provided those records are not substituted for the instructions applicable to a different setup. After work is complete, isolate energy sources and release stored pressure safely before carrying out inspection or maintenance, following the equipment documentation. Clean and examine the components identified in the maintenance instructions, noting wear or damage that needs attention before the next deployment. Protect the machine during storage and transport, and keep its documentation accessible to the crew. When requesting assistance for a fiber optic cable blower, provide the machine identification, cable and duct dimensions, air supply details and a precise account of the issue. Photographs or operating records may help technical personnel understand the situation, when they can be obtained safely. Fibernet’s assistance in the United States and worldwide gives customers a point of contact for discussing equipment questions; confirm the appropriate support channel for your location. Combining Italian-made machinery with disciplined preparation and informed technical dialogue helps contractors approach each installation with clearer expectations and better control over the working process.
Fill out the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.