Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fiber optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Selecting a cable blower starts with understanding what your crews need to install, where they work, and which operating conditions they encounter. Fibernet brings an Italian engineering background to this decision, with products made in Italy and assistance available in the United States and worldwide. For American telecommunications companies and installation contractors purchasing Italian equipment, that combination provides a practical starting point: discuss the application before choosing a machine, then establish how technical assistance will be accessed once the equipment reaches the jobsite. Rather than treating every installation as identical, the selection process should begin with the cable, the duct, and the demands of the planned route. A cable blower for fiber optic cable installation must be evaluated against the actual cable diameter, duct internal diameter, cable construction, and operating limits stated by the relevant manufacturers. These details influence equipment compatibility and help identify which accessories, seals, and guiding components require confirmation before an order is placed. Route length matters, but it should never be considered in isolation. Changes in direction, elevation differences, duct joints, existing contamination, and the condition of the cable sheath can all affect installation behavior. Contractors should therefore prepare a clear application brief rather than rely on a headline distance claim. Include the expected range of cable sizes, typical duct dimensions, available compressor specifications, and whether crews regularly move between different installation scenarios. This information makes a technical discussion more productive and helps avoid purchasing a configuration that suits only one unusually favorable project. Fibernet introduced its first blowing machine, Lady, in 2021, building on the technical experience of founder Giancarlo Trinei and the company established in 2001. That history provides context for its product development, while suitability for a particular contract should still be established through current specifications and application guidance. When comparing a fiber cable blower with another proposed configuration, ask how cable contact is managed, how the cable enters the duct, and what adjustments the operator must make during setup. Confirm which components are supplied and which depend on the intended cable and duct combination. Also establish the equipment requirements for compressed air, electrical power where applicable, transport, and routine inspection. A useful purchasing conversation ends with a documented understanding of the proposed configuration, its operating boundaries, and the assistance arrangements available to the buyer. The objective is not simply to acquire a machine. It is to equip a working crew with an appropriate, understandable setup that supports controlled installation and can be evaluated against the specific conditions of each project.
An effective blowing operation depends on preparation as much as equipment selection. Before the machine is positioned, the crew should verify that the intended duct route is ready for installation and that the cable is suitable for the proposed method. Follow the duct, cable, and equipment manufacturers' procedures for checking continuity, cleanliness, and integrity. A route that contains water, debris, damaged joints, or excessive leakage can undermine an otherwise appropriate setup. Identifying these problems before feeding begins helps prevent avoidable interruptions and makes it easier to distinguish route problems from equipment adjustments. Positioning also deserves attention. The cable drum should allow smooth payout without creating unnecessary resistance, while the feed path into the machine should respect the cable manufacturer's bending requirements. Stable placement, controlled access to the work area, and clear communication between crew members support an orderly installation. The compressor and connecting hoses must be suitable for the selected equipment, with pressure, airflow, air quality, and connection requirements checked against the applicable documentation. Never substitute a general pressure assumption for the limits specified for the actual setup. When configuring a fiber optic cable blower, verify that guides, seals, and cable-contact components match the installation being undertaken. Incorrectly selected or poorly maintained components can introduce leakage, excessive resistance, or uneven contact with the cable. Operators should understand the purpose of each adjustment and follow the manufacturer's setup sequence rather than compensate for an underlying mismatch by increasing force. Any recommended lubricant must be compatible with the cable and duct materials and used according to the relevant instructions. During operation, progress should be monitored continuously. Unexpected resistance, irregular payout, unusual noise, visible sheath damage, or a change in installation behavior calls for assessment rather than an automatic increase in drive or air settings. Stop and investigate whenever safe operation or cable integrity is uncertain. A cable blower for fibre optic cable does not remove the need to respect the cable's allowable installation loads and bending limits. Instead, the equipment must be used within a coordinated process that takes these limits into account. Keeping a simple installation record can improve future planning. Record the cable and duct dimensions, route characteristics, machine configuration, relevant operating settings, and any interruptions or corrective actions. Such records help a contractor compare similar jobs without assuming that identical settings will suit every route. After completion, inspect and clean the machine according to its documentation, check wear items, and prepare the required components for the next assignment. For buyers of Fibernet equipment, discussing these practical requirements before purchase helps clarify what the crew will need on site and which questions should be addressed through technical assistance in the United States or elsewhere.
The purchase price of installation equipment is only one part of a contractor's decision. A useful quotation should make clear which machine configuration is being proposed, what is included, and which application-specific components may need to be purchased separately. For a cable blower, those details can influence both initial expenditure and readiness for the first job. Before comparing offers, give each supplier the same application information so that differences in scope are visible. Otherwise, a lower figure may simply reflect a package that excludes components another supplier has included. When researching fiber cable blower price, consider the complete operating setup rather than treating the machine as a standalone item. Depending on the equipment and application, the assessment may need to account for compatible cable guides, duct connections, seals, transport arrangements, compressed-air provision, maintenance items, and replacement wear parts. Request confirmation of these requirements instead of assuming that every accessory is standard. Buyers importing Italian-made equipment should also clarify shipping arrangements, applicable documentation, delivery expectations, and any responsibilities associated with receiving the order. Commercial terms should be confirmed directly for the specific purchase. Support is another part of ownership that deserves a precise discussion. Fibernet combines Italian manufacturing with assistance in the United States and worldwide, allowing prospective buyers to ask how technical questions and service requests will be handled for their location. Confirm the available contact channels, the information required when reporting a problem, and the process for identifying replacement components. Do not assume a particular response time, local stock position, or service arrangement unless it has been expressly confirmed. Keeping the machine identification, configuration details, photographs, and installation observations available can make a support request more informative. Contractors considering a used fiber cable blower should apply an equally disciplined assessment. Establish the machine's identity, maintenance history, operating condition, and completeness before focusing on the asking price. Inspect wear components, check whether essential accessories are present, and confirm that documentation and compatible replacement parts can still be obtained. Any functional inspection or demonstration should be carried out safely by competent personnel under appropriate conditions. A second-hand purchase may involve additional uncertainty, especially when its previous use or maintenance cannot be verified. Fibernet's family-led history offers further context for a purchasing conversation. The company was founded in 2001, and its generational transition began in 2010 with Matteo, Marta, and Ismael joining the business. For the buyer, however, the decisive outcome remains practical: a clearly specified Italian-made product, an understandable ownership budget, and support arrangements suited to the intended operating location. Request a quotation that connects those elements to your actual cable and duct requirements.
Fill out the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet advisor using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.